Mitsubishi for Service call 1-336-969-0110 at Industrial Electronics Repair

Mitsubishi Service & Repair Forum

I need assistance with the Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier unit. It caused downtime. What happened? When did it occur? Waiting for a quick answer before the next shift.

—> Purchase or Repair:

— Posted by Lon on 2010-04-12

Reply🗨️Ask a New Question Below❓

If you need your Mitsubishi unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 103 Comments

#Mitsubishi Electric Corporation by Charles Aron on 2025-05-18 06:08

Hello, we have a Mitsubishi Electric Corporation MR-E-40AG-KH003 servo drive that needs repair or replacement. Can you please provide information on how to proceed? Thank you.

—> Purchase or Repair:

#Mitsubishi Electric by Tim Murphy on 2010-01-03 21:39

Reporting a failed drive or board on the Mitsubishi Electric BD625A887G52 KON-128H power supply. Action needed ASAP to avoid downtime.

—> Purchase or Repair:

#Mitsubishi by Marginean Marius on 2011-08-02 09:08

Dear Sirs, Please help us with an error code that we have on this driver MDS-B-SP-260, from a MAZAK CNC Lathe QT-200.On the display of the driver we have F6 - 36 error code, and on the machine driver malfunction.Thank you and we are waiting for your reply,Best regards,Marginean Marius—> …Purchase or Repair:

#Mitsubishi by Leopoldo Gonzalez on 2008-01-07 22:02

Dear sirs. I have a Brake press Amada HFB 8025, I need a servo amplifier Melservo Mitsubishi MR-SO 403N

—> Purchase or Repair:

#Mitsubishi by Strayer on 2010-08-17 09:22

Mitsubishi MDS-A-V2-3510 issue Servo Drive/Spindle amplifier malfunction impacting production line. Urgent action needed for repair service assistance.

—> Purchase or Repair:

#Mitsubishi by Bhogal on 2024-11-09 11:05

The Mitsubishi HF-SP102B Servo Drive unit malfunctioned today, causing unexpected downtime. The issue occurred during the morning shift. Could you provide guidance on troubleshooting and resolving this problem before the next shift begins?

—> Purchase or Repair:

#Mitsubishi by DITMER on 2010-01-29 20:19

We experienced downtime due to an issue with the Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier. Can you please provide some guidance on what might have caused this and when it occurred? Appreciate your

—> Purchase or Repair:

#Mitsubishi by sonnico elsisura on 2006-12-05 17:52

their is an error on our mitsubishi melservo-sa-r the error is alarm 52. pls reply us. thanks.

—> Purchase or Repair:

#Mitsubishi by David Wardle on 2010-08-15 05:36

Hello, I'm interested in purchasing a Mitsubishi MR-SA-33T Melservo-SA Servo Drive. Could you provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#Mitsubishi Electric by Steven Baeza on 2010-11-17 20:17

Can you confirm if the Mitsubishi Electric BD625A887G52 KON-128H power supply unit is still supported, and if replacement parts are available? Thank you.

—> Purchase or Repair:

#Mitsubishi by Bonnie Pierson on 2025-02-19 15:39

The Mitsubishi MR-J2-200B 2KW Servo Drive is not working and needs attention from maintenance.

—> Purchase or Repair:

#Mitsubishi by SADI on 2019-06-29 04:04

Our Mitsubishi FR-E720S-11 SC-EC industrial inverter unit is showing errors and not functioning properly. We need urgent repair service to get it up and running again. Please provide availability for a technician to come to our facility. Thank you.

—> Purchase or Repair:

#Mitsubishi Electric by aji on 2010-07-01 06:57

Machine is not powering up.

—> Purchase or Repair:

#Mitsubishi by Len King on 2010-03-18 05:08

The Mitsubishi MR-SA-33T Melservo-SA servo drive malfunctioned yesterday at 730 PM, leading to unexpected downtime. We need to identify the root cause

—> Purchase or Repair:

#Mitsubishi by Pai on 2024-08-30 11:23

Do you have a Mitsubishi MDS-C1-SPH-55 in stock for sale or repair? Our production is waiting on this crucial component.

—> Purchase or Repair:

#Mitsubishi by HUANG on 2010-11-18 18:17

We have a Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier that stopped working. Could you please provide repair information or suggest where to find a replacement? Thank you for your quick assistance.

—> Purchase or Repair:

#Mitsubishi Electric by Basudev on 2010-10-24 16:41

I'm experiencing difficulty with the Mitsubishi Electric BD625A887G52 KON-128H power supply. It seems to have stopped working and I'm unsure why. Could you please assist me with this issue?

—> Purchase or Repair:

#Mitsubishi by Lluis j Jaimes Delgado on 2017-03-27 14:00

The Mitsubishi FR-F740-S185K-CHT inverter drive just failed, need immediate attention. No operations until fixed.

—> Purchase or Repair:

#Mitsubishi Electric by ALEXIS PARRA on 2010-04-27 03:06

I have a Mitsubishi Electric BD625A887G52 KON-128H power supply unit that needs repair. It is currently not functioning and I need someone skilled in industrial unit repairs to address the issue

—> Purchase or Repair:

#Mitsubishi by Mark Ivess on 2025-05-17 11:38

Looking for someone to repair my Mitsubishi FR-Z320-11K-AL inverter. It's not responding and needs immediate attention. Thank you.

—> Purchase or Repair:

#Mitsubishi by Phil Hibdon on 2025-04-15 06:47

The Mitsubishi 501W000 drive unit is malfunctioning, causing a complete halt in production. Urgent repairs are needed to ensure minimal downtime and resume operations swiftly.

—> Purchase or Repair:

#Mitsubishi by zhangmenglong on 2010-01-21 04:25

Looking for repair for Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier - experiencing erratic movements and abnormal noises during operation. Need assistance ASAP to ensure operations remain uninterrupted.

—> Purchase or Repair:

#Mitsubishi by Langhirt on 2022-10-12 00:00

Could you provide further details regarding the malfunction of the Mitsubishi fr-e520-7-5k-na unit?

—> Purchase or Repair:

#Mitsubishi by lyndon hammill on 2024-10-07 17:02

Mitsubishi Q68DAI D/A Converter Module is malfunctioning, impacting production line output. Urgent repair needed to resume operations

—> Purchase or Repair:

#Mitsubishi by Jansen Danganan on 2020-01-01 23:22

Our Mitsubishi MDS-B-V2-1005 servo drive unit is still down. We need assistance with this matter urgently. Please respond

—> Purchase or Repair:

#Mitsubishi by Tim Van Bruggen on 2011-04-05 14:05

I have a Mitsubishi lathe model M-TC8A serial TC8A-005. I believe one of the soft keys on the controll is sticking. I have removed both the small board and large board and cannot find anything wrong with them. I am pretty sure that one is sticking because I can here the beep and all my lights flash …Purchase or Repair:

#Mitsubishi Electric by Bella on 2010-11-16 02:57

The Mitsubishi Electric power supply unit BD625A887G52 KON-128H is exhibiting abnormal behavior. It is not functioning as expected.

—> Purchase or Repair:

#Mitsubishi Electric Corporation by Mike m on 2022-06-16 06:23

Hello! I hope you're doing well. I'm working on getting your Mitsubishi Electric Corporation MDS-C1-V2-1010 servo drive repaired or replaced. Before proceeding, I just wanted to confirm if it can be repaired or if a new one needs to be purchased. Your

—> Purchase or Repair:

#Mitsubishi by eugene a riotte on 2022-09-20 00:00

Mitsubishi MC116 circuit board issue, unit not powering on. Need repair service ASAP.

—> Purchase or Repair:

#Mitsubishi by Arstall on 2010-03-23 12:20

Hello, I'm interested in purchasing the Mitsubishi MR-SA-33T Melservo-SA Servo Drive. I wanted to inquire about its pricing and availability as I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#Mitsubishi by Mike Stalzer on 2016-07-23 00:00

Based on my previous experience, the MITSUBISHI PD21B CNC module might be experiencing intermittent power loss resulting in frequent system freezing during operation. This could indicate a potential issue with the power supply or internal connections. Further inspection by a qualified technician is …Purchase or Repair:

#Mitsubishi by Maroulas on 2010-12-12 12:39

Hello, I need urgent repair information for a malfunctioning Mitsubishi MR-SA-33T Melservo-SA servo drive. Please provide details as soon as possible. Thank you.

—> Purchase or Repair:

#Mitsubishi by SYED TALHA ANSAR on 2011-01-09 16:48

DEAR SIR I AM USING MR-J2S-10A BUT SOME OF MY DERIVES R INDICATING AL-E9I HAVE REPLACED ITS POWER MODULE BUT THE PROBLEM IS STILL THEREWILL U PLZ GUIDE METHANX

—> Purchase or Repair:

#Mitsubishi by The on 2010-12-05 01:34

Hello, my client is experiencing issues with a Mitsubishi MR-SA-33T Melservo-SA Servo Drive. Can you please provide information on troubleshooting and potential repair options for this model? Thank you.

—> Purchase or Repair:

#Mitsubishi by wesley eddlemo on 2020-09-15 04:06

The Mitsubishi FR-A540-22K A500 22KW Inverter is not working.

—> Purchase or Repair:

#Mitsubishi by DeLurgio on 2021-07-10 09:55

The Mitsubishi Q64AD-GH A/D input module malfunctioned, causing downtime. This occurred during the night shift on July 12th. Please advise ASAP.

—> Purchase or Repair:

#Mitsubishi by ellis on 2010-11-29 08:12

Hello, I am reaching out on behalf of my client regarding an issue with a Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier. Could you please provide information on repair options and estimate for this component? Thank you.

—> Purchase or Repair:

#Mitsubishi by jay on 2011-08-30 15:28

the error you have is a F6 3b and it means that the unit has over heated, you can power down for 20 min and it may clear its self if not you may need a new drive als make sure the cooling fan on the side is running

—> Purchase or Repair:

#Mitsubishi by vahid on 2010-02-12 23:07

Do you have a Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier available for sale or repair? Our unit went down, and we need to get production running smoothly again. Thank you.

—> Purchase or Repair:

#Mitsubishi Electric by JUAN CAMILO CASTANO on 2010-03-18 12:10

The Mitsubishi Electric BD625A887G52 KON-128H power supply unit seems to be malfunctioning. It is exhibiting unusual behavior, but I'm not certain what the issue is.

—> Purchase or Repair:

#Mitsubishi by Nebojsa on 2024-11-08 02:36

We're experiencing a critical issue with the Mitsubishi MDS-C1-CV-185 POWER SUPPLY that is affecting the production line. Immediate attention and repair are needed to reduce downtime and resume operations swiftly.

—> Purchase or Repair:

#Mitsubishi by Bruno Neto on 2010-10-18 09:10

I\'m having a trouble with a MR-J2S-70A (Servo Amplifier)It\'s returning the alarm 37 and i don\'t use the regenarative brake and the parameters are well definided for that...The alarms is still there and i\'d like to know if there is anyway to fix it...Thanks for all the information that you can gi…Purchase or Repair:

#Mitsubishi by Jaap on 2010-03-19 18:27

The Mitsubishi MDS-A-V2-3510 unit is not working and needs maintenance attention.

—> Purchase or Repair:

#Mitsubishi by Jorge Coelho on 2010-09-18 15:20

have you a schematic diagram of this unit?have you some information to help us to fix this problem?Thank you

—> Purchase or Repair:

#Mitsubishi by Boros on 2010-11-04 23:44

The Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier unit is not working.

—> Purchase or Repair:

#Mitsubishi by Phanom on 2008-01-31 09:13

I HOPE THATE YOU HELP US TO SOLV THES PROPLEM IN MELSERVO MODEL MR-SA502WHEN POWER ON THE ALARM COD AL24 IS DISPLAY THANK YOU FOR YOUR SUPPORT

—> Purchase or Repair:

#Mitsubishi Okk Hm40 by DAN on 2010-05-15 15:45

: Our industrial unit, a large-scale packaging facility, has been experiencing a consistent issue with the conveyor system. The belt constantly breaks down, causing significant delays in product packaging and resulting in lost revenue. This leads to increased labor costs as we're forced to manually …Purchase or Repair:

#Mitsubishi by blackjack54 on 2017-09-26 07:57

Machine displaying error code E102.

—> Purchase or Repair:

#Mitsubishi by MICHAEL BV. SANCHEZ on 2006-06-19 05:44

mitsubishi mc-70

—> Purchase or Repair:

#Mitsubishi by crispin on 2010-11-04 19:44

Mitsubishi MR-SA-33T Melservo-SA is malfunctioning. The servo drive is causing a halt in production. Need immediate repair to resume operations.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.