Mitsubishi for Service call 1-336-969-0110 at Industrial Electronics Repair

Mitsubishi Service & Repair Forum

We have a Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier that stopped working. Could you please provide repair information or suggest where to find a replacement? Thank you for your quick assistance.

—> Purchase or Repair:

— Posted by HUANG on 2010-11-18

Reply🗨️Ask a New Question Below❓

If you need your Mitsubishi unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 103 Comments

#Mitsubishi by Lon on 2010-04-12 10:16

I need assistance with the Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier unit. It caused downtime. What happened? When did it occur? Waiting for a quick answer before the next shift.

—> Purchase or Repair:

#Mitsubishi by St on 2016-07-09 00:56

The Mitsubishi FR-A024-2.2KP is not functioning properly. Please have it checked by maintenance.

—> Purchase or Repair:

#Mitsubishi by Ben Tudor on 2023-10-22 16:28

Mitsubishi Inverter IssueMessageHi there, I was informed that the Mitsubishi FR-E520S-1.5K-EC 1.5kW inverter is not working properly. Kindly assist with troubleshooting or repairs. Thank you.

—> Purchase or Repair:

#Mitsubishi by Tim Van Bruggen on 2011-04-05 14:05

I have a Mitsubishi lathe model M-TC8A serial TC8A-005. I believe one of the soft keys on the controll is sticking. I have removed both the small board and large board and cannot find anything wrong with them. I am pretty sure that one is sticking because I can here the beep and all my lights flash …Purchase or Repair:

#Mitsubishi by Mark Ivess on 2025-05-17 11:38

Looking for someone to repair my Mitsubishi FR-Z320-11K-AL inverter. It's not responding and needs immediate attention. Thank you.

—> Purchase or Repair:

#Mitsubishi by ALAN BUTTIGIEG on 2024-11-22 02:21

One of the Mitsubishi QM30DY-H transistor modules failed - need a replacement ASAP!

—> Purchase or Repair:

#Mitsubishi by Phil Hibdon on 2025-04-15 06:47

The Mitsubishi 501W000 drive unit is malfunctioning, causing a complete halt in production. Urgent repairs are needed to ensure minimal downtime and resume operations swiftly.

—> Purchase or Repair:

#Mitsubishi Electric by Darrell lamme on 2010-03-22 22:51

Hey team, the Mitsubishi Electric BD625A887G52 KON-128H power supply unit went down mid-shift. Needs attention ASAP!

—> Purchase or Repair:

#Mitsubishi by crispin on 2010-11-04 19:44

Mitsubishi MR-SA-33T Melservo-SA is malfunctioning. The servo drive is causing a halt in production. Need immediate repair to resume operations.

—> Purchase or Repair:

#Mitsubishi by jeerkajh on 2025-05-21 05:51

Hi, I'm looking for repair info on a Mitsubishi dl-scz-22-k-d. Urgent replacement needed, but can't find one. Can you assist with repair details ASAP? Thank you.

—> Purchase or Repair:

#Mitsubishi by Ruby on 2025-06-05 13:36

The Mitsubishi SF-CA experienced downtime due to issues with the circuit board. The incident occurred during our shift, and I need a quick response before the next one begins. Thank you.

—> Purchase or Repair:

#Mitsubishi by Iwan Sutio on 2023-07-30 12:40

Hi there, I understand you're having an issue with the Mitsubishi FR-S540E-0.75K-EC unit. From what I gather, it's a 0.75kW three-phase micro inverter compatible with the FR-DU04. The problem seems to be that it's not working as expected. Let me know if you need further assistance.—> …Purchase or Repair:

#Mitsubishi by Geraldzew on 2018-02-17 00:46

The Mitsubishi HF-KP23B drive or board has failed, needs immediate attention. Operating at less than optimal capacity, affecting production.

—> Purchase or Repair:

#Mitsubishi by Aguiar on 2010-07-12 21:14

The Mitsubishi MDS-A-V2-3510 MDS-A-V2-3510 servo drive/spindle amplifier seems to have stopped working properly. It's causing issues with the machine's functionality, but I'm unsure of the exact problem. Hopefully, we can get it resolved soon.

—> Purchase or Repair:

#Mitsubishi by blackjack54 on 2017-09-26 07:57

Machine displaying error code E102.

—> Purchase or Repair:

#Mitsubishi by Glenn Karl on 2010-04-19 13:15

I'm interested in purchasing a Mitsubishi MR-SA-33T Melservo-SA Servo Drive. Can you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:

#Mitsubishi Electric by Mukesh Rawat on 2010-10-25 19:54

The power supply unit of the Mitsubishi Electric BD625A887G52 KON-128H is failing, disrupting the production line. Urgent repair is needed to resume operations swiftly.

—> Purchase or Repair:

#Mitsubishi by Pai on 2024-08-30 11:23

Do you have a Mitsubishi MDS-C1-SPH-55 in stock for sale or repair? Our production is waiting on this crucial component.

—> Purchase or Repair:

#Mitsubishi by SYED TALHA ANSAR on 2011-01-09 16:48

DEAR SIR I AM USING MR-J2S-10A BUT SOME OF MY DERIVES R INDICATING AL-E9I HAVE REPLACED ITS POWER MODULE BUT THE PROBLEM IS STILL THEREWILL U PLZ GUIDE METHANX

—> Purchase or Repair:

#Mitsubishi by Negron on 2005-09-15 00:00

Hi there, I am currently assisting an employee with a malfunction on a Mitsubishi MR-J2-100A system. The issue is unclear, and we are in need of repair information to identify the problem and find a replacement part. Can you please provide us with detailed repair instructions or suggest a suitable r…Purchase or Repair:

#Mitsubishi by Jorge Coelho on 2010-09-18 15:20

have you a schematic diagram of this unit?have you some information to help us to fix this problem?Thank you

—> Purchase or Repair:

#Mitsubishi by Nelsen on 2010-03-19 23:27

We experienced downtime due to an issue with the Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier. This occurred during the night shift today. Could you please provide insights into what went wrong to help us resolve the problem before the next shift?

—> Purchase or Repair:

#Mitsubishi by Mukesh Rawat on 2011-02-16 07:56

Dear sir,I want the specification of this battery(MR-BAT)so please send me early.Need to replace this battery.Thanks Mukesh Rawat

—> Purchase or Repair:

#Mitsubishi by The on 2010-12-05 01:34

Hello, my client is experiencing issues with a Mitsubishi MR-SA-33T Melservo-SA Servo Drive. Can you please provide information on troubleshooting and potential repair options for this model? Thank you.

—> Purchase or Repair:

#Mitsubishi by Mehmet KARA on 2007-06-24 02:40

When I turn on the uniformity machinery, al32 alarm appears suddenly on mrh350an servo driver.Please help me. What does it mean \"al32\"

—> Purchase or Repair:

#Mitsubishi by FAWZY on 2014-09-18 00:00

Urgent Downtime Report for Mitsubishi MDS-CH-CV-260Hi Team,I am writing to report an unexpected downtime caused by the Mitsubishi MDS-CH-CV-260 unit. Unfortunately, the specific issue is unknown at this time as we are still investigating the root cause.Downtime occurred today at , impacting our prod…Purchase or Repair:

#Mitsubishi by SHAIKH on 2025-05-24 21:12

Hey team, the Mitsubishi MDS-A-SP-150 spindle drive unit went down mid-shift last night. Needs attention ASAP. Cheers.

—> Purchase or Repair:

#Mitsubishi by vahid on 2010-02-12 23:07

Do you have a Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier available for sale or repair? Our unit went down, and we need to get production running smoothly again. Thank you.

—> Purchase or Repair:

#Mitsubishi by Phanom on 2008-01-31 09:13

I HOPE THATE YOU HELP US TO SOLV THES PROPLEM IN MELSERVO MODEL MR-SA502WHEN POWER ON THE ALARM COD AL24 IS DISPLAY THANK YOU FOR YOUR SUPPORT

—> Purchase or Repair:

#Mitsubishi Electric by STEVE PATTON on 2010-04-26 22:06

Hi there! Could you please provide repair information for the Mitsubishi Electric BD625A887G52 KON-128H power supply unit? Our team urgently needs this information for a replacement. Thank you.

—> Purchase or Repair:

#Mitsubishi by Morne Maree on 2025-05-26 16:36

The Mitsubishi BY171E475G51 control board failed on Machine #3. Need replacement ASAP to prevent further downtime.

—> Purchase or Repair:

#Mitsubishi by Manuel Jimenez Garcia on 2008-05-15 02:17

their is an error on our mitsubishi melservo-sa-r the error is alarm 52. pls reply us. thanks.

—> Purchase or Repair:

#Mitsubishi by HUANG on 2010-11-18 18:17

We have a Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier that stopped working. Could you please provide repair information or suggest where to find a replacement? Thank you for your quick assistance.

—> Purchase or Repair:

#Mitsubishi by Langhirt on 2022-10-12 00:00

Could you provide further details regarding the malfunction of the Mitsubishi fr-e520-7-5k-na unit?

—> Purchase or Repair:

#Mitsubishi by gilliland on 2014-08-01 00:00

Hi there, I'm interested in purchasing a Mitsubishi MDS-A-BT-6 unit. I wanted to inquire about pricing and availability as I'm looking to source one quickly. Thank you!

—> Purchase or Repair:

#Mitsubishi by Asheesh on 2025-01-15 02:09

One of the boards on the Mitsubishi FX3U-7DM display module has failed, causing a disruption in the system. Need to troubleshoot and replace

—> Purchase or Repair:

#Mitsubishi by Mike Stalzer on 2016-07-23 00:00

Based on my previous experience, the MITSUBISHI PD21B CNC module might be experiencing intermittent power loss resulting in frequent system freezing during operation. This could indicate a potential issue with the power supply or internal connections. Further inspection by a qualified technician is …Purchase or Repair:

#Mitsubishi by Nebojsa on 2024-11-08 02:36

We're experiencing a critical issue with the Mitsubishi MDS-C1-CV-185 POWER SUPPLY that is affecting the production line. Immediate attention and repair are needed to reduce downtime and resume operations swiftly.

—> Purchase or Repair:

#Mitsubishi by jay on 2011-08-30 15:28

the error you have is a F6 3b and it means that the unit has over heated, you can power down for 20 min and it may clear its self if not you may need a new drive als make sure the cooling fan on the side is running

—> Purchase or Repair:

#Mitsubishi by Dale on 2010-08-21 00:30

Hey, the Mitsubishi MR-SA-33T Melservo-SA drive unit is down. Needs attention ASAP. Hope you can check it out in the morning.

—> Purchase or Repair:

#Mitsubishi by Jeff Osborn on 2025-01-20 02:44

The Mitsubishi FR-D720-2.2K inverter unit is not functioning properly. Please inspect and troubleshoot the issue at your earliest convenience.

—> Purchase or Repair:

#Mitsubishi Electric Corporation by Charles Aron on 2025-05-18 06:08

Hello, we have a Mitsubishi Electric Corporation MR-E-40AG-KH003 servo drive that needs repair or replacement. Can you please provide information on how to proceed? Thank you.

—> Purchase or Repair:

#Mitsubishi by SLANINA on 2010-11-18 01:17

The Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier unit is down. Needs immediate attention. Please follow up during the day. - Night shift maintenance crew.

—> Purchase or Repair:

#Mitsubishi by Boros on 2010-11-04 23:44

The Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier unit is not working.

—> Purchase or Repair:

#Mitsubishi by eugene a riotte on 2022-09-20 00:00

Mitsubishi MC116 circuit board issue, unit not powering on. Need repair service ASAP.

—> Purchase or Repair:

#Mitsubishi Okk Hm-40 by Ben Cooper on 2023-05-17 00:00

The Mitsubishi Okk HM-40 is not functioning properly.

—> Purchase or Repair:

#Mitsubishi by mittal on 2024-05-28 03:52

The Mitsubishi FR-SF-4-26KP-T AC Spindle Controller is not functioning normally. It is exhibiting unusual behavior and not working as expected. Please look into this issue to ensure the unit is operating correctly.

—> Purchase or Repair:

#Mitsubishi by SUBBARAYULU.K on 2009-05-06 07:17

ALARM : AL20 GIVEN after 3 to 4 operations.servo drive model no:MR-J2S-70A

—> Purchase or Repair:

#Mitsubishi by BATSCH on 2020-12-03 18:34

Can the Mitsubishi MR-J2S-200B-QR141U633 Servo Drive be repaired or replaced? Trying to check this off my to-do list. Thank you.

—> Purchase or Repair:

#Mitsubishi Electric by aji on 2010-07-01 06:57

Machine is not powering up.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.