Mitsubishi for Service call 1-336-969-0110 at Industrial Electronics Repair

Mitsubishi Service & Repair Forum

Hello, I am reaching out on behalf of my client regarding an issue with a Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier. Could you please provide information on repair options and estimate for this component? Thank you.

—> Purchase or Repair:

— Posted by ellis on 2010-11-29

Reply🗨️Ask a New Question Below❓

If you need your Mitsubishi unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 103 Comments

#Mitsubishi by Phil Hibdon on 2025-04-15 06:47

The Mitsubishi 501W000 drive unit is malfunctioning, causing a complete halt in production. Urgent repairs are needed to ensure minimal downtime and resume operations swiftly.

—> Purchase or Repair:

#Mitsubishi by lyndon hammill on 2024-10-07 17:02

Mitsubishi Q68DAI D/A Converter Module is malfunctioning, impacting production line output. Urgent repair needed to resume operations

—> Purchase or Repair:

#Mitsubishi by Lon on 2010-04-12 10:16

I need assistance with the Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier unit. It caused downtime. What happened? When did it occur? Waiting for a quick answer before the next shift.

—> Purchase or Repair:

#Mitsubishi by Morne Maree on 2025-05-26 16:36

The Mitsubishi BY171E475G51 control board failed on Machine #3. Need replacement ASAP to prevent further downtime.

—> Purchase or Repair:

#Mitsubishi by R.Baskaran on 2009-08-19 19:31

Dear Sir, In MR-J2S-70A servo drivedisplay showing AL - - ,Kindly help us to solve this problemRegardsR.Baskaran

—> Purchase or Repair:

#Mitsubishi Okk Hm-40 by Ben Cooper on 2023-05-17 00:00

The Mitsubishi Okk HM-40 is not functioning properly.

—> Purchase or Repair:

#Mitsubishi by MICHAEL BV. SANCHEZ on 2006-06-19 05:44

mitsubishi mc-70

—> Purchase or Repair:

#Mitsubishi by Jaap on 2010-03-19 18:27

The Mitsubishi MDS-A-V2-3510 unit is not working and needs maintenance attention.

—> Purchase or Repair:

#Mitsubishi by ellis on 2010-11-29 08:12

Hello, I am reaching out on behalf of my client regarding an issue with a Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier. Could you please provide information on repair options and estimate for this component? Thank you.

—> Purchase or Repair:

#Mitsubishi by Boros on 2010-11-04 23:44

The Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier unit is not working.

—> Purchase or Repair:

#Mitsubishi by jay on 2011-08-30 15:28

the error you have is a F6 3b and it means that the unit has over heated, you can power down for 20 min and it may clear its self if not you may need a new drive als make sure the cooling fan on the side is running

—> Purchase or Repair:

#Mitsubishi by archie reyes on 2009-05-31 15:23

we have servo amplifier j2s 350 but we have no servo motor so can u help pls. and also ask the alarm 16 how to reset thank you and God bless you

—> Purchase or Repair:

#Mitsubishi by Negron on 2005-09-15 00:00

Hi there, I am currently assisting an employee with a malfunction on a Mitsubishi MR-J2-100A system. The issue is unclear, and we are in need of repair information to identify the problem and find a replacement part. Can you please provide us with detailed repair instructions or suggest a suitable r…Purchase or Repair:

#Mitsubishi Electric by ALEXIS PARRA on 2010-04-27 03:06

I have a Mitsubishi Electric BD625A887G52 KON-128H power supply unit that needs repair. It is currently not functioning and I need someone skilled in industrial unit repairs to address the issue

—> Purchase or Repair:

#Mitsubishi by Iwan Sutio on 2023-07-30 12:40

Hi there, I understand you're having an issue with the Mitsubishi FR-S540E-0.75K-EC unit. From what I gather, it's a 0.75kW three-phase micro inverter compatible with the FR-DU04. The problem seems to be that it's not working as expected. Let me know if you need further assistance.—> …Purchase or Repair:

#Mitsubishi by BATSCH on 2020-12-03 18:34

Can the Mitsubishi MR-J2S-200B-QR141U633 Servo Drive be repaired or replaced? Trying to check this off my to-do list. Thank you.

—> Purchase or Repair:

#Mitsubishi by Jeff Osborn on 2025-01-20 02:44

The Mitsubishi FR-D720-2.2K inverter unit is not functioning properly. Please inspect and troubleshoot the issue at your earliest convenience.

—> Purchase or Repair:

#Mitsubishi by Glenn Karl on 2010-04-19 13:15

I'm interested in purchasing a Mitsubishi MR-SA-33T Melservo-SA Servo Drive. Can you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:

#Mitsubishi by Strayer on 2010-08-17 09:22

Mitsubishi MDS-A-V2-3510 issue Servo Drive/Spindle amplifier malfunction impacting production line. Urgent action needed for repair service assistance.

—> Purchase or Repair:

#Mitsubishi by Mukesh Rawat on 2011-02-16 07:56

Dear sir,I want the specification of this battery(MR-BAT)so please send me early.Need to replace this battery.Thanks Mukesh Rawat

—> Purchase or Repair:

#Mitsubishi by hieu on 2010-08-03 12:01

Please advise if the Mitsubishi MR-SA-33T Melservo-SA servo drive is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:

#Mitsubishi by Manuel Jimenez Garcia on 2008-05-15 02:17

their is an error on our mitsubishi melservo-sa-r the error is alarm 52. pls reply us. thanks.

—> Purchase or Repair:

#Mitsubishi Electric by aji on 2010-07-01 06:57

Machine is not powering up.

—> Purchase or Repair:

#Mitsubishi by Mr. Surya Agussatria on 2021-07-19 03:58

Mitsubishi FR-E540-5.5K-CHT inverter displaying "Overcurrent Fault" error code.

—> Purchase or Repair:

#Mitsubishi by M.Kaviani nezhad on 2018-08-09 17:16

Hello, Can you please provide more information regarding troubleshooting and potential repair options for a Mitsubishi A1SJ71AP21 Data Link Module? Thank you.

—> Purchase or Repair:

#Mitsubishi by zhangmenglong on 2010-01-21 04:25

Looking for repair for Mitsubishi MDS-A-V2-3510 Servo Drive/Spindle Amplifier - experiencing erratic movements and abnormal noises during operation. Need assistance ASAP to ensure operations remain uninterrupted.

—> Purchase or Repair:

#Mitsubishi by HUANG on 2010-11-18 18:17

We have a Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier that stopped working. Could you please provide repair information or suggest where to find a replacement? Thank you for your quick assistance.

—> Purchase or Repair:

#Mitsubishi by Asheesh on 2025-01-15 02:09

One of the boards on the Mitsubishi FX3U-7DM display module has failed, causing a disruption in the system. Need to troubleshoot and replace

—> Purchase or Repair:

#Mitsubishi by Ruby on 2025-06-05 13:36

The Mitsubishi SF-CA experienced downtime due to issues with the circuit board. The incident occurred during our shift, and I need a quick response before the next one begins. Thank you.

—> Purchase or Repair:

#Mitsubishi by Nino Yanchapaxi on 2021-03-21 09:15

The unit connected with the Mitsubishi Q170CDCBL3M cable for the A30CD-PCF SSCNET interface board is behaving unusually.

—> Purchase or Repair:

#Mitsubishi by Bonnie Pierson on 2025-02-19 15:39

The Mitsubishi MR-J2-200B 2KW Servo Drive is not working and needs attention from maintenance.

—> Purchase or Repair:

#Mitsubishi by Ben Tudor on 2023-10-22 16:28

Mitsubishi Inverter IssueMessageHi there, I was informed that the Mitsubishi FR-E520S-1.5K-EC 1.5kW inverter is not working properly. Kindly assist with troubleshooting or repairs. Thank you.

—> Purchase or Repair:

#Mitsubishi by David Wardle on 2010-08-15 05:36

Hello, I'm interested in purchasing a Mitsubishi MR-SA-33T Melservo-SA Servo Drive. Could you provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#Mitsubishi by SADI on 2019-06-29 04:04

Our Mitsubishi FR-E720S-11 SC-EC industrial inverter unit is showing errors and not functioning properly. We need urgent repair service to get it up and running again. Please provide availability for a technician to come to our facility. Thank you.

—> Purchase or Repair:

#Mitsubishi Electric Corporation by Charles Aron on 2025-05-18 06:08

Hello, we have a Mitsubishi Electric Corporation MR-E-40AG-KH003 servo drive that needs repair or replacement. Can you please provide information on how to proceed? Thank you.

—> Purchase or Repair:

#Mitsubishi Electric by Keyes on 2010-11-13 22:08

The Mitsubishi Electric BD625A887G52 KON-128H power supply unit is not working according to the maintenance team. Please investigate further.

—> Purchase or Repair:

#Mitsubishi by Phanom on 2008-01-31 09:13

I HOPE THATE YOU HELP US TO SOLV THES PROPLEM IN MELSERVO MODEL MR-SA502WHEN POWER ON THE ALARM COD AL24 IS DISPLAY THANK YOU FOR YOUR SUPPORT

—> Purchase or Repair:

#Mitsubishi by Hitoshi Sugi on 2008-05-06 06:05

Dear sir.We are manufacturing the electrical machinery and apparatus in Japan.Our customer is using Mitsubishi Melservo MR-SA 202U.But Alarm code 24 indicated on the display of that one.The servomotor did not move. Please estimate it for repair if it is possible. Products .....Mitsubishi AC servo MR…Purchase or Repair:

#Mitsubishi Electric by Mukesh Rawat on 2010-10-25 19:54

The power supply unit of the Mitsubishi Electric BD625A887G52 KON-128H is failing, disrupting the production line. Urgent repair is needed to resume operations swiftly.

—> Purchase or Repair:

#Mitsubishi by Sunil Shivatare on 2011-11-09 14:09

Dear Sir .We have a cnc sliding head machine on which the mitsubishi - AC Servo MELSERVO-SA is fitted for turret application .Macvhine has been recently imported .While installation we r facing problem on the above drive .Intially alarm AL32 over current alarm was coming ,so we tried to check the mo…Purchase or Repair:

#Mitsubishi by Marginean Marius on 2011-08-02 09:08

Dear Sirs, Please help us with an error code that we have on this driver MDS-B-SP-260, from a MAZAK CNC Lathe QT-200.On the display of the driver we have F6 - 36 error code, and on the machine driver malfunction.Thank you and we are waiting for your reply,Best regards,Marginean Marius—> …Purchase or Repair:

#Mitsubishi by Mark Ivess on 2025-05-17 11:38

Looking for someone to repair my Mitsubishi FR-Z320-11K-AL inverter. It's not responding and needs immediate attention. Thank you.

—> Purchase or Repair:

#Mitsubishi by SLANINA on 2010-11-18 01:17

The Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier unit is down. Needs immediate attention. Please follow up during the day. - Night shift maintenance crew.

—> Purchase or Repair:

#Mitsubishi by jeerkajh on 2025-05-21 05:51

Hi, I'm looking for repair info on a Mitsubishi dl-scz-22-k-d. Urgent replacement needed, but can't find one. Can you assist with repair details ASAP? Thank you.

—> Purchase or Repair:

#Mitsubishi Electric by Tim Murphy on 2010-01-03 21:39

Reporting a failed drive or board on the Mitsubishi Electric BD625A887G52 KON-128H power supply. Action needed ASAP to avoid downtime.

—> Purchase or Repair:

#Mitsubishi by Ted Acker on 2019-04-21 07:03

The Mitsubishi HF-SP352 3.5kW Servo Drive experienced a malfunction, causing downtime during the last shift. It is crucial to resolve this issue

—> Purchase or Repair:

#Mitsubishi by Geraldzew on 2018-02-17 00:46

The Mitsubishi HF-KP23B drive or board has failed, needs immediate attention. Operating at less than optimal capacity, affecting production.

—> Purchase or Repair:

#Mitsubishi by DeLurgio on 2021-07-10 09:55

The Mitsubishi Q64AD-GH A/D input module malfunctioned, causing downtime. This occurred during the night shift on July 12th. Please advise ASAP.

—> Purchase or Repair:

#Mitsubishi by sonnico elsisura on 2006-12-05 17:52

their is an error on our mitsubishi melservo-sa-r the error is alarm 52. pls reply us. thanks.

—> Purchase or Repair:

#Mitsubishi by crispin on 2010-11-04 19:44

Mitsubishi MR-SA-33T Melservo-SA is malfunctioning. The servo drive is causing a halt in production. Need immediate repair to resume operations.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.