Procond for Service call 1-336-969-0110 at Industrial Electronics Repair

Procond Service & Repair Forum

I'm experiencing trouble with the Procond EWM 1000 Plus W1A0DDBF. It seems like there's an issue with the board, but I'm not entirely sure. The machine has stopped working properly.

—> Purchase or Repair:

— Posted by Barend on 2010-03-29

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Procond"

Procond → Procond EWM 1000 PLUS W1A0DDBF ↗
Procond → Procond MC-70 124438 ↗
Procond Elettronica → Procond Elettronica MC-70 124438 ↗
Procond → Procond MC-70 ↗
Procond Elettronica → Procond Elettronica MC-70 motor controller ↗

If you need your Procond unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 614 Comments

#Procond Elettronica by Dimitris Poulis on 2011-05-18 13:03

i have problems with my electronic board is it possible for you to repair it or replace it and how is the cost? if this is possible please inform me about the way to send you my electronic board and the payment method.type P: 451510051 F: 5100type E: 12430392/5SW Ver. W2C01250 21/00—> …Purchase or Repair:

#Procond Elettronica by Marco Garcia on 2007-02-03 04:46

I need schematics for the MC-70 for Proform 985 CD treamill. Where can I get a copy?

—> Purchase or Repair:

#Procond by AGBOOLA on 2006-12-18 13:04

The Procond MC-70 unit (124438), the treadmill controller, is not working according to the shop.

—> Purchase or Repair:

#Procond Elettronica by E on 2007-10-05 18:05

the Procond Elettronica MC-70 124438 treadmill board on unit X is malfunctioning. Needs attention ASAP. Please check it out first thing in the morning. Thanks!

—> Purchase or Repair:

#Procond Elettronica by terrance shermnan on 2007-06-01 00:50

I urgently need assistance with the Procond Elettronica MC-70 124438 treadmill controller. The unit is still down, and we require immediate attention. Please respond

—> Purchase or Repair:

#Procond Elettronica by Monzur on 2007-10-10 17:40

The Procond Elettronica MC-70 124438 treadmill controller is not working and needs attention.

—> Purchase or Repair:

#Procond Elettronica by de on 2006-06-03 19:22

The Procond Elettronica MC-70 124438 treadmill controller board is malfunctioning, causing a complete stoppage of the production line. Urgent repair service is required to rectify this issue

—> Purchase or Repair:

#Procond Elettronica by Glassuth on 2022-02-27 02:48

At the same time, many antique

—> Purchase or Repair:

#Procond Elettronica by Willie Jimenez on 2005-12-08 07:52

The Procond Elettronica MC-70 124438 treadmill board is displaying unusual behavior in the warehouse.

—> Purchase or Repair:

#Procond Elettronica by Sebastian Voss on 2007-03-27 16:08

Hello,I have a refrigerator and inside ist a plateType Procond 452747163 sw NGBF0A1L242523719 ERF2000P-01.D 220/240V 50Hz - ERF2000PBon this plate is the part, which ist marked with \"T1\" (a transformator)broken.Can you sell it to me, and what is the price.ThanksSebastian Voss—> …Purchase or Repair:

#Procond Elettronica by Bob Chidester on 2007-09-01 11:56

Do you have a Procond Elettronica MC-70 124438 treadmill controller available for sale or repair? Our production is down, and we need to get it up and running as soon as possible.

—> Purchase or Repair:

#Procond Elettronica by dulce on 2006-01-03 15:57

Procond Elettronica 45220051 675807501 board malfunctioning, affecting production line. Urgent action needed to resolve issue

—> Purchase or Repair:

#Procond Elettronica by Ben Hinx on 2011-04-21 10:10

Is it possible to purchase the control unit for an AEG Oko Lavamat 72630 update:GE Procond Elettronicatype P - 451510051 F:4875Type E - 12430392/5SW Ver - W2C01250 26/00

—> Purchase or Repair:

#Procond Elettronica by Charles Ray on 2008-05-28 13:34

I have a sears treadmill with mc-70 motor controller #124438 that has shorted diodes. I would like to have a price on repairs or replacement.Thanks Charles

—> Purchase or Repair:

#Procond by Muniz on 2010-03-02 20:31

Hi there, our Procond EWM 1000 Plus W1A0DDBF board has stopped working. We need a replacement. Could you please provide us with repair information? We need a quick response. Thank you!

—> Purchase or Repair:

#Procond Elettronica by Edy Gerah on 2009-01-17 22:16

> Dear Sir/Madem,>>> I would like to asking you about your product sale .> I\'m looking for the HP 62A .New or other stocks .> Do you sale them ? Can I reguest order to you and internasional delivery> order to Singapore .> Because I have small business/personal.> Hope we can doing business and the f…Purchase or Repair:

#Procond Elettronica by Bobby on 2008-07-31 00:56

Replaced the diodes like all others. Replaced the big resistors as well. Still not working. Getting 130v out from the motor +/- but the motor isn\'t turning. There is a lot of corrosion near this board, as if the previous owner spilled something and maybe shorted out the board. Is there supposed to …Purchase or Repair:

#Procond Elettronica by Jim Drouillard on 2007-01-24 15:32

Do you have a Procond Elettronica MC-70 124438 treadmill controller available for sale or repair? We need it urgently to keep production running smoothly. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Marco Gualengi on 2007-07-19 20:25

Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Jim Mason on 2007-03-09 00:48

Procond Elettronica MC-70 124438 treadmill controller displaying error code E05, preventing treadmill function.

—> Purchase or Repair:

#Procond Elettronica by Mount on 2006-11-08 18:57

The treadmill controller on the Procond Elettronica MC-70 124438 is malfunctioning, disrupting the production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:

#Procond Elettronica by altamimi on 2006-01-03 10:57

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Urgent repair service is required to restore operation swiftly.

—> Purchase or Repair:

#Procond Elettronica by Niels Sylvest on 2020-09-04 14:35

I have a printcard it is mounted in AEG Electrolux Lavatherm TN95670is it possible to repair, so that machine can be used again, there is no light in the panel at all, and the repair man told me that the failure is in the computer/print.please inform me adress for repair of the card in Denmark—> …Purchase or Repair:

#Procond Elettronica by fabiana di porto on 2011-01-13 16:48

It seems that the Precond Elettronica 356084601 circuit of my Ariston LS 41 dishwasher is broken.Is it possible to buy a new one?How much would it cost?Thank youFabiana

—> Purchase or Repair:

#Procond Elettronica by Gerald Harman on 2009-07-23 16:55

Please repair and tesT under load for satisfactory operation. Believe burn out at DZ1, dz4a, dz4b LOCATION ON BOARD.

—> Purchase or Repair:

#Procond Elettronica by Seltz on 2006-06-22 17:34

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a critical halt in production. Urgent repair service needed to resolve issue swiftly and resume operation as soon as possible.

—> Purchase or Repair:

#Procond by mike webb on 2006-10-26 22:27

The Procond MC-70 124438 treadmill board is malfunctioning, causing a halt in production. Please send a repair technician urgently to resolve this issue and get the production line running smoothly again.

—> Purchase or Repair:

#Procond Elettronica by Mitch Gryboski on 2006-06-20 00:32

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, disrupting our production line. Urgent repair service is needed to get the line back up and running efficiently. Thank you.

—> Purchase or Repair:

#Procond Elettronica by brunner gerhard on 2008-09-10 06:51

please tell me for what application ist this part used?thank you

—> Purchase or Repair:

#Procond Elettronica by Harbert on 2006-09-21 17:00

The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, disrupting our production line. Urgent repair service needed immediately to resolve the issue and restore normal operations.

—> Purchase or Repair:

#Procond Elettronica by Ir Juli Sinaga on 2006-06-22 00:34

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, affecting the production line. Immediate repair service is required to restore operations.

—> Purchase or Repair:

#Procond Elettronica by suparjo on 2012-03-20 11:32

My LUX washing machine was in problem. According to the technision the CPU is not working properly. He remove the CPU but he did not sure.The CPU written as below:GE Procond ElettronicaType P451510093 F:6473Type E.124303983SW Ver.W2C01551 24/giu./05My questions are:1. Can that unit be repair2. if it…Purchase or Repair:

#Procond Elettronica by BIKOE on 2007-02-08 21:32

The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E2 signaling a motor issue. Treadmill stops abruptly during use. Need immediate assistance to diagnose and fix the problem.

—> Purchase or Repair:

#Procond Elettronica by hclm2 on 2006-06-21 08:34

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, affecting the production line. Urgent repair service needed to resolve the issue

—> Purchase or Repair:

#Procond Elettronica by farid sumawan on 2006-06-20 01:32

Procond Elettronica MC-70 124438 treadmill controller not functioning, slowing down production line. Urgent repair service needed to resolve issue

—> Purchase or Repair:

#Procond Elettronica by Tim Dong on 2011-09-11 15:51

I am in need of the schematic for MC-70 AW.Rev -, Motor Control, P/N: 124438. Apprearantly, Zener diode, DZ1 and diode D10 were damaged. Does anyone know where I can get it? Thank you very much.Best Regards,Tim Dong

—> Purchase or Repair:

#Procond Elettronica by Doris Reveron on 2007-09-13 08:54

Hello, we're looking for repair information for a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide details on how to fix or replace the controller? Thanks.

—> Purchase or Repair:

#Procond Elettronica by Antonio Sánchez Ortiz on 2012-03-01 17:27

Good afternoon, I`m looking for a module Procond Elettronica 3560089039 for a washdisher Fagor, and also the price.Thank you very much.

—> Purchase or Repair:

#Procond Elettronica by fraz ahmad on 2010-12-07 09:32

please i have this part MC 70 Part #124438. . . .. please some can tell me the exact values of these locations DZ3 or DZ1, DZ2,DZ4,D10,D11. . . . . please reply. . then i could repair my Treadmill . . .

—> Purchase or Repair:

#Procond Elettronica by Edward Pavlina on 2007-05-14 17:19

Can the Procond Elettronica MC-70 124438 treadmill board be repaired or replaced? I'm looking to check this off my to-do list.

—> Purchase or Repair:

#Procond Elettronica by Stan may on 2007-04-04 19:56

Hello, I'm interested in the Procond Elettronica MC-70 124438 treadmill board. Could you please provide information on pricing and availability? I'm hoping to source one quickly. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Danton Grube on 2005-12-08 05:52

The Procond Elettronica MC-70 124438 treadmill board is displaying abnormal behavior.

—> Purchase or Repair:

#Procond Elettronica by james on 2007-11-28 00:56

I replaced DZ1 and DZ4 for my Reebok ACD2 per Mark\'s comment, and it works fine now. Great thanks to Mark\'s info. -james

—> Purchase or Repair:

#Procond Elettronica by Ullmann on 2007-04-04 13:56

Looking for repair on Procond Elettronica MC-70 124438 treadmill controller. Not functioning properly, need technical expertise to diagnose and fix the issue. Any recommendations for specialized repair services appreciated.

—> Purchase or Repair:

#Procond Elettronica by Dieter Pauwels on 2012-02-28 18:08

Hello GeoffI have the exact same problem. Did you find the answer?Thx

—> Purchase or Repair:

#Procond Elettronica by Marilyn on 2006-01-03 01:57

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. Immediate repair service is needed to get the line moving again swiftly.

—> Purchase or Repair:

#Procond Elettronica by Dan Baldauf on 2008-06-20 23:44

I have a treadmill that when turned on starts slowly for about 1 minute and then shuts down. it displays an Er2 error message. Any thoughts on what is wrong the cost it might be to fix it.????Dan

—> Purchase or Repair:

#Procond Elettronica by aleks on 2017-06-25 19:47

Circuit Diagram procond elettronica 3560033089. R68 - ?????

—> Purchase or Repair:

#Procond Elettronica by Reimert on 2007-09-30 14:53

HelloIm also would like to test this my module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this module *******Waht is the cost for repair? What is the cost for a new one?GE Procond ElettronicaType P. 451510051 Type E. 12430392/5SW Ver. W2C01250 2…Purchase or Repair:

#Procond Elettronica by Gergõ Mészáros on 2009-06-25 09:24

HelloI would like to enquire the undermentioned washing machine from the available of a component and the data of technical:Procond Elettronika411 625 431kWith thanks :Gergõ

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.