Rittenhouse Service & Repair Forum

My model 552 is not working. Licensed Electrician checked it out and it need replacement parts. I want to keep actual doorbell, because of sentimental reasons.

—> Purchase or Repair: Ticket Image

— Posted by Jessica Memmott on 2010-07-22

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Rittenhouse"

If you need your Rittenhouse unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 312 Comments

#Rittenhouse by Bill Corbett on 2022-02-07 13:47
Emerson c8203 replacement transformer?Any help would be appreciated.Thanks, Bill

—> Purchase or Repair:
#Rittenhouse by miriam spear on 2011-05-16 14:13
Only one of four chimes works, although we detect a faint electronic buzzing, in sequence, of the other three. For example, we hear Chime A, buzz, buzz, pause, buzz, buzz, Chime A. As cover has been lost, we suspect dust and grime is keeping the other hammers from working.Can the unit be cleaned and…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Lynn Young on 2015-09-20 19:01
Did you locate the 3 coils you were looking for ? I also need one

—> Purchase or Repair:
#Rittenhouse by Marcy Berry on 2011-03-03 21:25
I am a property manager who manages a townhome with a broken Rittenhouse intercome system. The speakers on the exterior are installed in the brick so to remove them is a huge project. The main console in the kitchen is what I am looking to repair or replace. The model number is: (looks like) M7034. …Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Charles Sumrell on 2018-06-16 18:05
Tag on door chime unit says:Model 8846RVolt 16Rittenhouse Division Spartan ElectricFayetteville NC 28386The unit has four tubes, it has a circuit board with integrated circuits. The transformer is putting out 18.5 volts, although the unit says 16 volts on transformer and circuit board. I assume the …Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by MARK WILSON on 2011-01-12 14:35
This is a Mechanical doorbell with Electronic Control Board. I need Someone to give me an estimate for repair or tell me where I can get parts for this device. Thanks, Mark Wilson

—> Purchase or Repair:
#Rittenhouse by rosemary ortiz on 2009-11-11 22:30
we can not get it to chime in sequence. if doorbell is pressed it chimes once (#4).

—> Purchase or Repair:
#Rittenhouse by John Erlinger on 2011-12-01 21:30
It appears the hammers are sticking or a spring has broken. There are three. Can i get replacement solenoids/hammers, or an estimate to repair the whole Chime unit. Also if you think it would be best to buy new.Thank you.,John

—> Purchase or Repair:
#Rittenhouse by Franklin D Bamsey on 2011-08-30 18:30
I have an Emerson Door Bell C 8204 and it is not working. Need a response to this E- mail please.

—> Purchase or Repair:
#Rittenhouse by Mark on 2017-09-04 20:48
I'm looking for a replacement circuit board for a Rittenhouse model C8538. Please let me know where I can purchase one.

—> Purchase or Repair:
#Rittenhouse by Robert King on 2010-08-02 01:52
I know this chime assembly is very old but is there a replacement kit for the hammers. they are sticking and perhaps the springs are just too soft. I\'d appreciate any help you can give me.

—> Purchase or Repair:
#Rittenhouse by John Reaney on 2017-02-11 01:00
Hello, I have a rittenhouse door sentry. #M9035 w/ a M 9305 door station. The indoor station seems to work, it unlocks the door when the button is pushed. The M9305 out side station is my problem, the speaker is fried and the button is missing. Would you have these items? or where I might find them.…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Tobie Ross on 2018-04-13 02:54
I have a Sears Solid State Am-FM Master Station Radio/Intercom Model 113.35150 built by Emerson Electric. Can you repair this station. Please advise/

—> Purchase or Repair:
#Rittenhouse by Tom Mitchell on 2005-11-30 17:54
I have a Rittenhouse Home Intercom, Model No. M7010 that had no audio. A technician said the amplifier was bad and he replaced several transistors in it, but the volume is very weak. He does not know exactly what transistors to use to replace the old ones, and does not have a schematic. Can you prov…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Jim on 2010-05-01 22:41
I have the above model doorbell and really like the sound vs. the new \"electronic sound\" doorbells. Problem is the mechanism inside the doorbell (the part with the two knockers that the wires attach that hit the bells to make the sound) no longer works. Can I still get this part replaced and if so…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Hans Otto Mertens on 2008-01-01 23:36
The main unit needs repair!H.O.Mertens

—> Purchase or Repair:
#Rittenhouse by Christopher Cruz on 2011-03-09 13:15
Hellohave a 520 Beverly and it is working but I took it apart and found the rubber grommets and the felt strike pads are bad i am looking for replacements.ThanksChris

—> Purchase or Repair:
#Rittenhouse by Maria on 2017-06-19 14:33
I need wiring schematic for Emerson door chime model C8578-1

—> Purchase or Repair:
#Rittenhouse by Delia Castillo on 2008-07-29 03:14
we bought this house with installed system. not working. power source not found.

—> Purchase or Repair:
#Rittenhouse by Paul Winchock on 2018-10-15 21:41
I have a Rittenhouse 550, 551 doorbell chime.The unit itself works fine. What I am missing (which someone was supposed to nor trash) is the transformer that sequences the chimes. Do you have a transformer for this that will work? And if so, obviously, what would one cost?Thank you for taking the tim…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Ejschreier@hotmail.com on 2015-03-25 11:15
Lost during remodeling.

—> Purchase or Repair:
#Rittenhouse by IRA G NICHOLS on 2025-07-08 20:58
I have a rittenhouse model c8204 that stopped working, had been working for years. New outside doorbell installed my be the cause.Can I test the bell by shorting the two screw terminals on the rittenhouse inside unit.

—> Purchase or Repair:
#Rittenhouse by FLORENCE LUM on 2010-01-22 03:42
Is there someone in Honolulu, HI whom I can contact to test and repair my intercom, and replace my ON/Off switch @ the MASTER SPEAKER?We have enjoyed our unit for many years, since 1968.

—> Purchase or Repair:
#Rittenhouse by Eric Zetterberg on 2011-02-11 19:49
I have three doorbells connrcted to chimes but only one works, any suggestions?

—> Purchase or Repair:
#Rittenhouse by Maryellen Boudria on 2009-07-19 19:15
I have a Rittenhouse chime Model #410 with it\'s companion two chime on second floor of our 1927 home. The door bell chime works however we are not getting all chimes to work. Only two tones downstairs. Can this be repaired? Please advise.Also, can you tell me how old this model of Rittenhouse is?Ma…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by patrick stark on 2013-12-05 15:48
need wiring, replacement parts and pic of the model noted above. front door pushbutton lights, but no response from chime unit. the backdoor is working normal one chime. What may be wrong? the unit has a selector switch to scroll thru various chimes.

—> Purchase or Repair:
#Rittenhouse by Cathy Kirkwood on 2014-08-21 21:30
I purchased a home in Honeoye Falls, NY. It has an RCM 3 intercom that works and I would like to get a manual for it. Is it possible to get instructions for it?

—> Purchase or Repair:
#Rittenhouse by SUSAN R BOYD on 2006-05-16 13:16
My mom and dad has an old (approx.37yrs) rittenhouse intercom system and they need a replacement bulb for the main unit. I\'ve tried searchingonline but since mom nor dad know the exact part # i\'m having no luck.Dad said it was a low wattage pilot lamp?? GE19 or R19???? Any help you can offer would…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by GUY DALFINO on 2013-01-24 17:30
I THINK I NEED A TRANSFORMER CLOCK WLL NOT RUN TX IN ADVANCE gUY

—> Purchase or Repair:
#Rittenhouse by Earl Miller on 2012-10-11 01:03
Can I use the existing wiring and recessed wall areas of the old system listed above with a new replacement system. If so, what new updated system will work? Thanks

—> Purchase or Repair:
#Rittenhouse by Galen Beaupre on 2019-06-10 14:27
I have a Rittenhouse Model 526.What would cost to test it?

—> Purchase or Repair:
#Rittenhouse by Patsy Goodwyn on 2014-09-27 23:39
We need to replace the long tubes on these chimes. They are look bad and we have lost one of them. Do you have the 4 tubes to replace the old ones with? If so, how much are they? Patsy

—> Purchase or Repair:
#Rittenhouse by joe Delle Dinne on 2011-12-20 00:25
I would like to know if spare components are still available? eg transistors and LM283T 5 pin audio amp or regulator? Or is there a replacement UNIT and what is the cost for a compatible unit.

—> Purchase or Repair:
#Rittenhouse by Bob Hilsher on 2010-03-27 16:29
Unit stopped working. Have 16+ volts coming to it but no sound. Assume the syncronous motor is out... Telechron model M3151, Type H18, 3.6 rpm, 60 cy, 16 v. Is the replacement motor available? Price?Could it be anything else? All wiring is in tact on board.Thanks, Bob

—> Purchase or Repair:
#Rittenhouse by Mark Danko on 2015-09-10 19:17
Hi, need repair to this unit, sound cuts in and out when volume control knob is turned/wiggled. Moving molex 5 pin connector on circuit board also causes power to cut in and out. Mode delector knob has become stiff to operate. Please send estimate if repair is possible, thanks

—> Purchase or Repair:
#Rittenhouse by Andrew Lazazzera on 2018-02-05 18:04
Have Model DS-2 Door Sentry w/ 16v. chime transformer -Rittenhouse #30 or = need local chicagoland technician to trouble-shoot the control box w/ its transformer.-believe transformer is problem.

—> Purchase or Repair:
#Rittenhouse by J. G. Colbert on 2010-09-28 22:30
The rheostat is broken on this unit otherwise the unit is as melodious as it was 40 years ago.The numbers on the rheostat are 1406417 and 135-51 The motor is a Telechron synchronous motor. 118V--16 Model 3151 RPM 3. W. 4.CantI purchase the replacement rheostat and have it shipped to PMB 399 at the a…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Bob on 2007-04-07 23:14
We have the same system in our home. Did you find any compatible system? Did you replace your system? If so, what system did you use? Thank you. We need to replace everything except the wiring.

—> Purchase or Repair:
#Rittenhouse by David Peterson on 2006-03-01 03:17
The reception is pretty poor and weak on the volume. Do your know if there is an transisterized replacement receiver that will fit into the 1970\'s model. Thanks, David......

—> Purchase or Repair:
#Rittenhouse by charles dellasala on 2009-08-08 20:37
7th chime does not work can plunger be lubed if so with what

—> Purchase or Repair:
#Rittenhouse by dominic Carini on 2009-07-28 00:55
Ihave about a 30 year old rittenhouse with 4 chimes.It seems that the solenoids that activate the strikers,are getting a little lazy.I have had one apart and try to clean it ,with not much succes,I even lost one of those tiny springs. I tried to replace it with a similar one ,but it\'s not right.Do …Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by TONY HOVANEC on 2011-08-09 16:09
HAD LIGHTNING STRIKE AND WOULD LIKE TO REPLACE IF YOU HAVE A RETRO UNIT TO REPLACE IT THANK YOU

—> Purchase or Repair:
#Rittenhouse by chris on 2015-08-27 21:30
I have gone through the trouble shooting I have 16 volts to the main unit just nothing coming out of main unit. like its acting as if there is no voltage. will not power up, no intercom, no radio is it replacement time or can this be repaired relatively cheap?

—> Purchase or Repair:
#Rittenhouse by Art on 2011-02-07 18:45
My dad just passed away and I\'m moving his Rittenhouse Westminster clock/chime from his place to mine before selling the house. I believe it is a model 631 or 632 but I\'m not sure - WHERE CAN I FIND THE MODEL NUMBER? (I\'ve seen pics of what appear to be identical units labeled 631/632).I\'ve got …Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by R.Sarin on 2010-08-11 23:11
Hi I need a cover for the rittenhouse door chime model 380 can u pls get back to me thank you

—> Purchase or Repair:
#Rittenhouse by Gord on 2011-11-24 21:00
Jessica:I have the same model door chime, with the same problem. How did u make out with yours? Do you know any of the history of this chime. From what I can surmise, it was produced after WW2 and that would fit as it was in my parents house when i was born in 1954. I have a friend that is an electr…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Andrew Lazazzera on 2017-01-16 17:16
HAVE --MODEL DS-2 DOOR SENTRY SAYS 'NOT TO CONNECT TO POWER SOURCE OTHER THAN STANDARD 16 VOLT CHIME TRANSFORMER'NEED TESTING OF ITS TRANSFORMER.I THINK ITS THE TRANSFORMER!WHAT IS PROCESS TO FOLLOW FOR THIS?ANDREW h=773-589-0150 c=773-899-0423

—> Purchase or Repair:
#Rittenhouse by Don Pieschel on 2011-06-25 22:05
I have a RM-2 or a M9401 rittnhouse intercom I need a manual or schematic.any ideas where to locate.Don

—> Purchase or Repair:
#Rittenhouse by dave walters on 2008-10-24 14:59
Just wondering i have a rittenhouse system rcm-1 and the intercom system part does not seem to be working. We can broadcast for the main unit and it is heard in the other units but when we try to broadcast from one of the other units to the main you can not hear the person ? Anysuggestions or do you…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Rick Martin on 2015-07-19 07:20
The Rittenhouse C8578-1 135-7351-01 door chime unit caused downtime today from 930 AM to 1145 AM, impacting our operations. Need quick resolution before the next shift. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.