Rittenhouse Service & Repair Forum

I have a Rittenhouse Home Intercom, Model No. M7010 that had no audio. A technician said the amplifier was bad and he replaced several transistors in it, but the volume is very weak. He does not know exactly what transistors to use to replace the old ones, and does not have a schematic. Can you provide a schematic, or tell me where I might get one? Thanks, Tom Mitchell

—> Purchase or Repair:

Reply🗨️Ask a New Question Below❓

• Rittenhouse → Rittenhouse : emerson-rittenhouse IR-6 ↗
• Rittenhouse → Rittenhouse : Emerson rittenhouse Model rm20/rm22 ↗
• Rittenhouse → Rittenhouse : rittenhouse intercom model M 9034 ↗
• Rittenhouse → repair or replace Rittenhouse unit ↗
• Rittenhouse → Rittenhouse : Replace Old Emerson AM/FM radio intercom ↗
• Rittenhouse → Rittenhouse Old Rittenhouse Intercom System ↗
• Rittenhouse → Rittenhouse : Emerson Rittenhouse RCM -4 ↗
• Rittenhouse → rcm-1 rittenhouse system ↗
• Rittenhouse → Model RC633 ↗
• Rittenhouse → Rittenhouse RM20 iNTERCOM/rADIO ↗
• Rittenhouse → emerson rittenhouse door chime ↗
• Rittenhouse → Rittenhouse : Rittenhouse model# RCM4 ↗
• Rittenhouse → repair ↗
• Rittenhouse → rittenhouse IR-6 ↗
• Rittenhouse → re: emerson rittenhouse door chimes ↗
• Rittenhouse → old unit 4 wire ↗
• Rittenhouse → Rittenhouse, DE LUXE ALL-TRANSISTOR HOME INTERCOM, ↗
• Rittenhouse → Rittenhouse : Rittenhouse replacement ↗
• Rittenhouse → Rittenhouse replacement bulbs? ↗
• Rittenhouse → Emerson-Rittenhouse Door Bell Chime ↗
• Rittenhouse → Rittenhouse 510 Door Chime ↗
• Rittenhouse → Modei RCM-4 intercom ↗
• Rittenhouse → Rittenhouse star system 9000 rittenhouse ↗
• Rittenhouse → Emerson Rittenhouse model IR-6 ↗
• Rittenhouse → emerson rittenhouse door chimes ↗
• Rittenhouse → have old rittenhouse system -needs updating ↗
• Rittenhouse → Rittenhouse : Emerson-Rittenhouse Intercom Model RCM-4 ↗
• Rittenhouse → Rittenhouse : rittenhouse intercom ↗
• Rittenhouse → Rittenhouse: Model cr-10 ↗
• Rittenhouse → rittenhouse ↗
• Rittenhouse → Rittenhouse Rittenhouse door chime model C8536 ↗
• Rittenhouse → transformer ↗
• Rittenhouse → Rittenhouse : emerson rittenhouse ↗
• Rittenhouse → Rittenhouse : Model M 7915 ↗
• Rittenhouse → Rittenhouse : Rittenhouse Model 7300 ↗
• Rittenhouse → Rittenhouse : Intercom Update. ↗
• Rittenhouse → GE19 ↗
• Rittenhouse → Rittenhouse : chimes ↗
• Rittenhouse → Rittenhouse Rittenhouse Intercom ↗
• Rittenhouse → door bell clock ↗
• Rittenhouse → Rittenhouse : Update ↗
• Rittenhouse → Rittenhouse : intercom does not work ↗
• Rittenhouse → RM 22 am/fm ↗
• Rittenhouse → Doorbell model RC 577 ↗
• Rittenhouse → Rittenhouse : UPGRADE INCOME ↗
• Rittenhouse → Rittenhouse need transformer info ↗
• Rittenhouse → Rittenhouse Star System 9000 ↗
• Rittenhouse → Rittenhouse : I have a rittenhouse that does not work ↗
• Rittenhouse → Want to replace my up-grade my Rittenhouse interco ↗
• Rittenhouse → Rittenhouse : emmerson rittenhouse intercom rcm-4 \"broken\" ↗

Recent 311 Comments

#Rittenhouse by Mark Ivess on 2011-08-01 00:00

Hey there, I've been tasked with looking into an issue with a Rittenhouse C8578-1 135-7351-01 door chime. I don't usually work on hardware like this, so I could really use some guidance on how to fix or replace it. Any help or advice you can provide would be greatly appreciated. Thanks in advance!—>…Purchase or Repair: ...Hey there, I've been tasked with looking into an issue with a Rittenhouse C8578-1 135-7351-01 door chime. I don't usually work on hardware like this, so I could really use some guidance on how to fix or replace it. Any help or advice you can provide would be greatly appreciated. Thanks in advance!

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by James L Rockney on 2021-10-04 16:06

The small piston that strikes the chime does not return back to the original position. There is a spring on the piston. It seems like the piston should have a retainer of some sort on the end to hold the spring in place. Is there supposed to be a retainer on the end of the piston to keep the spring …Purchase or Repair: ...The small piston that strikes the chime does not return back to the original position. There is a spring on the piston. It seems like the piston should have a retainer of some sort on the end to hold the spring in place. Is there supposed to be a retainer on the end of the piston to keep the spring in place?

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by Doug on 2011-10-01 20:21

I currently have this unit for sale on ebay. the wiring is simply two wires from the 16v transformer to the appropriate screw terminals on the printed circuit board and then the \"switch leg\" from each door bell button at the doors you are using attached to the corresponding terminal screw as label…Purchase or Repair: ...I currently have this unit for sale on ebay. the wiring is simply two wires from the 16v transformer to the appropriate screw terminals on the printed circuit board and then the \"switch leg\" from each door bell button at the doors you are using attached to the corresponding terminal screw as labeled on the circuit board.

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by Art on 2011-02-07 18:45

My dad just passed away and I\'m moving his Rittenhouse Westminster clock/chime from his place to mine before selling the house. I believe it is a model 631 or 632 but I\'m not sure - WHERE CAN I FIND THE MODEL NUMBER? (I\'ve seen pics of what appear to be identical units labeled 631/632).I\'ve got …Purchase or Repair: ...My dad just passed away and I\'m moving his Rittenhouse Westminster clock/chime from his place to mine before selling the house. I believe it is a model 631 or 632 but I\'m not sure - WHERE CAN I FIND THE MODEL NUMBER? (I\'ve seen pics of what appear to be identical units labeled 631/632).I\'ve got it hooked up and the basic functions seem to be working - ie front doorbell and westminster chimes.However, as a kid, I seem to remember this thing also chiming on the hour and perhaps, single notes on the quarter hour, but it doesn\'t do that any more. Am I imagining things or has dad disabled this function somehow?I do see two screws on the extreme upper-right of the circuit board that have a jumper installed. What\'s that for?Lastly, I\'d like to install a 2nd door bell in the basement (I work at home, in my office basement and can\'t hear the main bell all the time). Before installing the Rittenhouse, I just had two bells wired together in parallel, but when I tried to do this with the Rittenhouse, it just triggered the chimes. What is the terminal marked EXT FRONT for?Thanx....

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by JENNIFER SMITH on 2011-09-21 15:16

I have a Ritten House Model 620R that needs to be repaired. The chimes are off of it and I have the motor ?? and clock box just needs to be put back together. I would love to have this repaired for my husband. We came across this clock out of a rental house we own and very sadley our renters damaged…Purchase or Repair: ...I have a Ritten House Model 620R that needs to be repaired. The chimes are off of it and I have the motor ?? and clock box just needs to be put back together. I would love to have this repaired for my husband. We came across this clock out of a rental house we own and very sadley our renters damaged it. It at one time was on the wall and still working. My husband was so upset. Could you please help and give me a price on getting it repaired.

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by Gary Bowles on 2012-07-17 00:01

Need a wiring diagram to an intercom with a doorbell.Artolier Lighting & Sound Div.Rittenhouse OperationsHonoye, NYmodel: M7034serial: (stamped) 202 (hand written) 0 2234-1748The intercom is powered by a 16 volt transformer on a closet wall. The standard 2-tone doorbell is in the hall. The base unit…Purchase or Repair: ...Need a wiring diagram to an intercom with a doorbell.Artolier Lighting & Sound Div.Rittenhouse OperationsHonoye, NYmodel: M7034serial: (stamped) 202 (hand written) 0 2234-1748The intercom is powered by a 16 volt transformer on a closet wall. The standard 2-tone doorbell is in the hall. The base unit is in the kitchen. The remote intercom at the front door. The button on the door unit rings the doorbell and is a hands-free unit to talk to the base unit.Oh yeah, there is also a door release button scabbed in to the base unit. and extra wires coming from the door unit to the door frame (but no door release mechanism.Any ideas on schematics for something like this???Thx, Gary

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by Marie Gunderman on 2007-11-26 01:41

We purchased our present home in 1998. It was custom built in 1983 with many upgrades that were available at that time. Unfortunately since we have lived here the system does not work. The main unit is 17\' wide and 9\" tall. There are 12 units scattered throughout the house. They each measure 7.5\"…Purchase or Repair: ...We purchased our present home in 1998. It was custom built in 1983 with many upgrades that were available at that time. Unfortunately since we have lived here the system does not work. The main unit is 17\' wide and 9\" tall. There are 12 units scattered throughout the house. They each measure 7.5\" tall by 8\" wide. I think what we have may be on the large size as far as the measurements of each room speaker and the main system as well. because of this we are afraid we are looking at a major renovation to replace it. New drywall and all that. Is there a possibility that it can be repaired or does Rittenhouse have a replacement that would fit? Please advise.Thank you,Marie Gunderman

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by Qaiser Baig on 2012-07-01 04:25

Hi,Some one open the wires of my door bell Model C8550 (in the bell). Would you please give the wiring/connection diagram for this door bell so that I can re-connect the wire to operate my door bell.You co-operation & early response will be highly appreciated.Regards,Qaiser Baig—> …Purchase or Repair: ...Hi,Some one open the wires of my door bell Model C8550 (in the bell). Would you please give the wiring/connection diagram for this door bell so that I can re-connect the wire to operate my door bell.You co-operation & early response will be highly appreciated.Regards,Qaiser Baig

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by Mary Anne Fuscaldo on 2009-12-25 23:04

I moved this door chime/clock when it was working from one home to another. The electrician that hooked it up did not do it correctly and I have no schematic for how it should be wired. I know it needs three wires but not sure on which of the 7 screws they get wired to. They do not indicate Com or T…Purchase or Repair: ...I moved this door chime/clock when it was working from one home to another. The electrician that hooked it up did not do it correctly and I have no schematic for how it should be wired. I know it needs three wires but not sure on which of the 7 screws they get wired to. They do not indicate Com or Trans just numbered 1-7. Your help is much appreciated.Regards,Mary Anne

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by Jim on 2010-05-01 22:41

I have the above model doorbell and really like the sound vs. the new \"electronic sound\" doorbells. Problem is the mechanism inside the doorbell (the part with the two knockers that the wires attach that hit the bells to make the sound) no longer works. Can I still get this part replaced and if so…Purchase or Repair: ...I have the above model doorbell and really like the sound vs. the new \"electronic sound\" doorbells. Problem is the mechanism inside the doorbell (the part with the two knockers that the wires attach that hit the bells to make the sound) no longer works. Can I still get this part replaced and if so, how much and where?Thanks

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by Debbie Solovey on 2014-10-25 01:56

Hello, I am living in the house I grew up in and all of a sudden I noticed thatthe front doorbell was not working. The side doorbell hasn\'t worked for a long time. I have done some research so I will give you the information I have.Nutone Chime Signal, made in USA 1952, Model K 26 902 or 002It is a…Purchase or Repair: ...Hello, I am living in the house I grew up in and all of a sudden I noticed thatthe front doorbell was not working. The side doorbell hasn\'t worked for a long time. I have done some research so I will give you the information I have.Nutone Chime Signal, made in USA 1952, Model K 26 902 or 002It is also called Rittenhouse/ Nutone Accordianl. I seen a picture of it.I can\'t get the doorbell to ring . I love the doorbell, I hope you can help me.thanks.Debbie

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by TR on 2007-10-27 18:13

I have a Rittenhouse intercom system that was installed in the 60\'s that worked fine until recently. Everything still works fine except the main intercom/control unit. Is there a replacement unit I can buy that I can use with all my existing speakers, etc throughout the house? Even a unit that only…Purchase or Repair: ...I have a Rittenhouse intercom system that was installed in the 60\'s that worked fine until recently. Everything still works fine except the main intercom/control unit. Is there a replacement unit I can buy that I can use with all my existing speakers, etc throughout the house? Even a unit that only played music would be OK with me.

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by Martin on 2009-02-08 05:30

I have the exact same problem, but it\'s not caused by a lighted doorbell. Without the doorbell connect (and not crossing the wires) the chime mechanism keeps repeating. I\'m not sure whether it\'s because the contacts aren\'t lined up correctly or whether it\'s a wiring problem. I\'ve tinkered and …Purchase or Repair: ...I have the exact same problem, but it\'s not caused by a lighted doorbell. Without the doorbell connect (and not crossing the wires) the chime mechanism keeps repeating. I\'m not sure whether it\'s because the contacts aren\'t lined up correctly or whether it\'s a wiring problem. I\'ve tinkered and tinkered to no avail.

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by bill morrison on 2006-05-03 03:40

we have an old rittenhouse intercom system. the units look old but still works fairly well. need information on how to update system look without replacing entire system. we\'re remodeling in some areas and would like to check out updating units. don\'t have specs on the system. not sure of—> …Purchase or Repair: ...we have an old rittenhouse intercom system. the units look old but still works fairly well. need information on how to update system look without replacing entire system. we\'re remodeling in some areas and would like to check out updating units. don\'t have specs on the system. not sure of

—> Purchase or Repair:
Show More

➡️ Reply

#Rittenhouse by neil Berman on 2009-07-08 05:25

I have a Rittenhouse Model S7806 Smoke/Fire detector system in my 3-level condo. It was there when I moved in so there is no manual for it.My problem is, after a thunder and lightening storm the other day, I came home to find all 3 units ringing. The only way I could silence them was to switch off t…Purchase or Repair: ...I have a Rittenhouse Model S7806 Smoke/Fire detector system in my 3-level condo. It was there when I moved in so there is no manual for it.My problem is, after a thunder and lightening storm the other day, I came home to find all 3 units ringing. The only way I could silence them was to switch off the circuit breaker. If I turn the breaker back on the alarms start sounding again. How do I reset them. There is no apparent reset button; nor can I find a master control box or module anywhere. Do they use them? They are connected to the ceiling box by 4 wires. Any help would be appreciated. Neil Berman

—> Purchase or Repair:
Show More

➡️ Reply