Rittenhouse Service & Repair Forum

i have a model 7035 that was removed from the wall to repair the wall. Now I need to reconnect - but don\'t know how the wires go together. Are there any instructions available?

β€”> Purchase or Repair: Ticket Image

β€” Posted by colleen on 2010-03-10

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "Rittenhouse"

If you need your Rittenhouse unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 315 Comments

#Rittenhouse by Ray Smith on 2011-11-29 00:44
very low sound no door chime

β€”> Purchase or Repair:
#Rittenhouse by Dorothy \"Ann\" Imhoff on 2014-10-23 22:17
A Rittenhouse model 312 came with my home. It works but the chimes are not loud enough to heard unless you are in the room where the doorbell is mounted.I would hate to replace it because other than this it is very workable.

β€”> Purchase or Repair:
#Rittenhouse by David on 2018-03-04 18:16
Have you ever heard of a response on the Rittenhouse 631/632. I too am refurbishing one and need to know the correct tranformer voltage needed and a wiring diagram surely would help. Any insight?

β€”> Purchase or Repair:
#Rittenhouse by mike boccio on 2015-08-28 16:39
hi I have a m7034 intercome system.The out door speak into box was flooded by our sandy storm.Needs to be replaced.The wiring is good and it would be easy to replace if I had original replacement kit. thank you mike

β€”> Purchase or Repair:
#Rittenhouse by Agnes R. Kellan on 2009-11-06 01:18
I have my radio-intercom since 1969--In hasn\'t worked for about three years. I have two stations.

β€”> Purchase or Repair:
#Rittenhouse by Paul Winchock on 2018-10-15 21:41
I have a Rittenhouse 550, 551 doorbell chime.The unit itself works fine. What I am missing (which someone was supposed to nor trash) is the transformer that sequences the chimes. Do you have a transformer for this that will work? And if so, obviously, what would one cost?Thank you for taking the tim…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by sal on 2018-01-16 16:43
Trying to obtain new springs and strikers/drivers

β€”> Purchase or Repair:
#Rittenhouse by Mickey Loveria on 2007-08-30 14:53
Existing model was put in my home maybe late 60\'s, with ivory base unit and 4 ivory receivers plus brass door unit intercom. The radio reception is irregular, fades in and out and there is much static. Sometimes have to jiggle knobs on base unit to tune radio! Any suggestions on where to go for upg…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Larry M Biviano on 2008-11-21 02:47
have hooked up several ways appear to only chime once as if wired for back door.clock woriks fine, does ot chime on all tones

β€”> Purchase or Repair:
#Rittenhouse by Howard Hendricks on 2009-07-12 04:29
I have a Rittenhouse Chine door bell with four long poles. The model number is c8578-1, The unit will not work, I noticed two bad diodes, and removed them I am having problems locating the right ones. Is this something you can fix?

β€”> Purchase or Repair:
#Rittenhouse by Mike on 2025-06-05 15:12
Trying to hook up ring with the rittenhouse 531 model. Not sure how the wiring should be set up? 4 white and red wires with 0-4 posts?

β€”> Purchase or Repair:
#Rittenhouse by Ejschreier@hotmail.com on 2015-03-25 11:15
Lost during remodeling.

β€”> Purchase or Repair:
#Rittenhouse by SUSAN R BOYD on 2006-05-16 13:16
My mom and dad has an old (approx.37yrs) rittenhouse intercom system and they need a replacement bulb for the main unit. I\'ve tried searchingonline but since mom nor dad know the exact part # i\'m having no luck.Dad said it was a low wattage pilot lamp?? GE19 or R19???? Any help you can offer would…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by ElectraChime on 2017-01-22 03:43
I can make new bells for this chime. See my sites: doorbellmuseum.org and electrachime.comBestRobert

β€”> Purchase or Repair:
#Rittenhouse by John Erlinger on 2011-12-01 21:30
It appears the hammers are sticking or a spring has broken. There are three. Can i get replacement solenoids/hammers, or an estimate to repair the whole Chime unit. Also if you think it would be best to buy new.Thank you.,John

β€”> Purchase or Repair:
#Rittenhouse by radu munteanu on 2022-04-20 17:35
Good day, I would need the wiring diagram for a Rittenhouse Clock Model 631/632. Just saved the clock from our old house before remodel and we want to install it back with a running clock and the chime.Thank youRadu 650-450-4806

β€”> Purchase or Repair:
#Rittenhouse by william j paveletz on 2018-03-09 19:10
i need a part model c8633 volts 16 need the main eletric gear

β€”> Purchase or Repair:
#Rittenhouse by Dan Mazzola Sr on 2020-05-31 15:36
I’m in need of a sequence timer for the above mentioned Emerson Rittenhouse clock/chimePlease advise on getting 1 of them by email or by calling me at 617/590-3509New or reconditioned

β€”> Purchase or Repair:
#Rittenhouse by Mark Hefner on 2012-05-18 01:33
I have a emerson rittenhouse rcm 4 main unit with IR6 speakers throughout a house i purchased and am interested in upgrading the entire system. Is there a replacement system where it can be changed out?It will be a few months before I am ready to do it, but am trying to look at options and replaceme…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Donald Brown on 2017-07-07 23:15
I need to have a bulb replacement performed on a 1980ties vintage bronze doorbell. The spring works fine but light nolonger stays on.Regards, Don

β€”> Purchase or Repair:
#Rittenhouse by Anthony Butts on 2011-10-02 19:14
The unit works, but possibly in need of some service. The AM radio works , but no FM. There is a bit of background noise in the system.

β€”> Purchase or Repair:
#Rittenhouse by Hans Otto Mertens on 2008-01-01 23:36
The main unit needs repair!H.O.Mertens

β€”> Purchase or Repair:
#Rittenhouse by Debbie Solovey on 2014-10-25 01:56
Hello, I am living in the house I grew up in and all of a sudden I noticed thatthe front doorbell was not working. The side doorbell hasn\'t worked for a long time. I have done some research so I will give you the information I have.Nutone Chime Signal, made in USA 1952, Model K 26 902 or 002It is a…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Ray G. Brubaker on 2017-09-11 14:32
I have a model Rittenhouse # E780DC door bell push button. The center plastic button is broken. I need a replacement . I can use the whole assemblyPlease email me as to where I can buy it. Thank you.

β€”> Purchase or Repair:
#Rittenhouse by Kathy Grant on 2018-09-24 16:43
I recently purchased an older home that has a Model # RC-475 - 16 volt door chime that works fine, but lacks the cover. Is it possible to purchase just a cover from you or is something like this no longer available. Amazon has one but the mfg. dimensions wouldn't fit. As close as I can measure …Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by john rohter on 2011-03-03 21:43
Looking for instruction for the door chime opporation.

β€”> Purchase or Repair:
#Rittenhouse by Richard Gilbert on 2014-03-13 02:02
Looking to replace the outside door bell speaker Mod. No.M9305

β€”> Purchase or Repair:
#Rittenhouse by Steve Macha on 2026-05-28 22:10
Portion of control board was electrically shorted. Troubleshooting is underway. A circuit diagram and parts list would be helpful. How can I obtain them?

β€”> Purchase or Repair:
#Rittenhouse by Adrian Younger on 2008-07-08 00:43
Hello. I have an Emerson-Rittenhouse Door Chime Model RC577 and it has quit working. I was wondering if there is a replacement transmitter available for this chime. It has the motor attached to the transmitter so I don\'t htink I can get a replacement at a store. Any information you could give me wo…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by lausanne walter on 2008-08-03 14:55
I have about a 1984 model, 16.5 inches by 9 inch am/fm intercom unit........unit does not work anymore. Cannot pick up radio stations by dialing the knob......do you have a replacement unit that would fit this spot? Or is it repairable?Lausanne

β€”> Purchase or Repair:
#Rittenhouse by Sharon on 2016-11-27 00:16
we have an old rittenhouse intercom system. the units look old but still works fairly well. need information on how to update system. we're remodeling in some areas and would like to check out updating units. don't have specs on the system. not sure of specs but Name on the system is Ritte…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Emily Gladden on 2016-10-16 21:20
When you press our door bell button a chime is not coming out of the box in the outlet.

β€”> Purchase or Repair:
#Rittenhouse by Angela on 2015-11-22 00:03
i am looking for the cover of the door chime for the above model that needs replacing.

β€”> Purchase or Repair:
#Rittenhouse by paul najarian on 2011-08-11 21:58
We\'ve got an old aprox. 30years old unit. signal fades in and out. Best to try and repair or do you sell new/updated maybe with cd or mp3 imputs? Also need a external outdoor speaker/intercom box. Has the 5 plug cupling. thanks,Paul

β€”> Purchase or Repair:
#Rittenhouse by Jeff Swiger on 2009-12-09 21:38
I would like to replace my working existing RMC-4 rittenhouse intercom with a compatible unit. While using the existing wires? Suggestions _ and would you be interested in the old unit and speakers - 8 + 1 doorThanks,

β€”> Purchase or Repair:
#Rittenhouse by Jennifer Walker on 2009-04-26 01:22
I have read several threads asking about updating an old Rittenhouse system. I would like to do the same, hopefully avoiding the need to replace drywall, etc., since this system is considerably larger than the Nutone products. I couldn\'t find any responses addressing whether or not there were solut…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Patsy Goodwyn on 2014-09-27 23:39
We need to replace the long tubes on these chimes. They are look bad and we have lost one of them. Do you have the 4 tubes to replace the old ones with? If so, how much are they? Patsy

β€”> Purchase or Repair:
#Rittenhouse by Paul Gilbert on 2016-06-07 01:02
Need to replace existing bell system with new Paul gilbert

β€”> Purchase or Repair:
#Rittenhouse by Harry Yagi on 2017-05-11 12:40
Due to the worn-weakened spring on the hitting bar which do not pop out from the solenoid hole. Do you sell the spring or the entire solenoid with the hitting bar?

β€”> Purchase or Repair:
#Rittenhouse by Norm Negus on 2010-12-02 00:14
Hello I have a Artolier Lighting and Sound Emerson Electric Co. Model C8535 the springs need replacing can you please Help thanks Norm

β€”> Purchase or Repair:
#Rittenhouse by dominic Carini on 2009-07-28 00:55
Ihave about a 30 year old rittenhouse with 4 chimes.It seems that the solenoids that activate the strikers,are getting a little lazy.I have had one apart and try to clean it ,with not much succes,I even lost one of those tiny springs. I tried to replace it with a similar one ,but it\'s not right.Do …Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Jessica Memmott on 2010-07-22 18:45
My model 552 is not working. Licensed Electrician checked it out and it need replacement parts. I want to keep actual doorbell, because of sentimental reasons.

β€”> Purchase or Repair:
#Rittenhouse by Marlene Ilijanich on 2024-06-26 02:50
Hello, I purchased my 4 note-8 note melody door chime in 1995. It has been set up on a battery operation operation

β€”> Purchase or Repair:
#Rittenhouse by TR on 2007-10-27 18:13
I have a Rittenhouse intercom system that was installed in the 60\'s that worked fine until recently. Everything still works fine except the main intercom/control unit. Is there a replacement unit I can buy that I can use with all my existing speakers, etc throughout the house? Even a unit that only…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by stan j korzinski on 2011-10-14 21:39
model c8550 8 note melody needs motor

β€”> Purchase or Repair:
#Rittenhouse by scott grim on 2009-07-22 11:43
I\'ve recently come in the possesion of an emerson-rittenhouse model 633 door chime and clock. Somebody must have placed 120volts of power to the 16 volt circiut burning out all the electronics. I need all the electrical components including the hammars and motors. if anyone knows where i can get pa…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by paul caley on 2010-10-09 16:33
plungers have stopped (tried lube) is model w clock can they be replaced by myself or must this be done by a pro or can the entire panel be more easily replaced thank you

β€”> Purchase or Repair:
#Rittenhouse by Qaiser Baig on 2012-07-01 04:25
Hi,Some one open the wires of my door bell Model C8550 (in the bell). Would you please give the wiring/connection diagram for this door bell so that I can re-connect the wire to operate my door bell.You co-operation & early response will be highly appreciated.Regards,Qaiser Baigβ€”> …Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Marcy Berry on 2011-03-03 21:25
I am a property manager who manages a townhome with a broken Rittenhouse intercome system. The speakers on the exterior are installed in the brick so to remove them is a huge project. The main console in the kitchen is what I am looking to repair or replace. The model number is: (looks like) M7034. …Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Bil Hoag on 2015-11-11 17:58
Installed in 1987 when we built the house. Has begun sporadic multiple, single dings, all hours, day and night. I have replaced, back up battery and fuse in motor. Now makes a fairly loud buzzing sound also. Thoughts?

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.