Rittenhouse Service & Repair Forum

I\'M A ROOFING CONTRACTOR IN HOUSTON. WHILE WORKING ON A PROJECT WE BROKE SOME INTERCOM SPEAKER BOXES AND I RPLACE THEM. I WOULD LIKE TO IF SELL THESE INTERCOM SPEAKERS.

—> Purchase or Repair: Ticket Image

— Posted by Alex Gracia on 2009-11-13

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Rittenhouse"

If you need your Rittenhouse unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 312 Comments

#Rittenhouse by Billy Hubbard on 2011-01-02 16:44
The Rittenhouse door intercom answering system system was installed in 1978. It is not functioning well. Do you have a newer replacement for it that would still have the doorbell and intercom system? Does a new unit come with the exterior speaker?

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by mccammond99@att.net on 2016-03-19 17:03
is there anyway i could get another one of these door bells?

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Donna Dodson on 2007-03-02 16:22
I would like to see if I can get this to work. But I don\'t know where to start.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Marie Gunderman on 2007-11-26 01:41
We purchased our present home in 1998. It was custom built in 1983 with many upgrades that were available at that time. Unfortunately since we have lived here the system does not work. The main unit is 17\' wide and 9\" tall. There are 12 units scattered throughout the house. They each measure 7.5\"…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Rick Martin on 2015-07-19 07:20
The Rittenhouse C8578-1 135-7351-01 door chime unit caused downtime today from 930 AM to 1145 AM, impacting our operations. Need quick resolution before the next shift. Thank you.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by IRA G NICHOLS on 2025-07-08 20:58
I have a rittenhouse model c8204 that stopped working, had been working for years. New outside doorbell installed my be the cause.Can I test the bell by shorting the two screw terminals on the rittenhouse inside unit.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Delia Castillo on 2008-07-29 03:14
we bought this house with installed system. not working. power source not found.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by van Aree on 2009-02-26 20:19
I am looking for a copy of Rittenhouse rm5 house intercom owner\'s manual.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by lausanne walter on 2008-08-03 14:55
I have about a 1984 model, 16.5 inches by 9 inch am/fm intercom unit........unit does not work anymore. Cannot pick up radio stations by dialing the knob......do you have a replacement unit that would fit this spot? Or is it repairable?Lausanne

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by phil hartshorn on 2017-01-10 16:24
need wiring diagram for c8538r door chime

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by sal on 2018-01-16 16:43
Trying to obtain new springs and strikers/drivers

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Kirk Niatsikas on 2014-12-11 19:16
Do you have a rittenhouse rm5 manual?

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by David Bergeron on 2017-10-23 07:12
wonder if I can acquire 1of the 3 boxes that throws the donger to. ring the far right chime of 3

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Diane Reichard on 2010-04-14 13:54
Hello! Do you have any parts for Rittenhouse (Emerson) All Transistor Radio-Intercom System, Model RM-1 (AM radio) or RM-2 (AM/FM radio)? Our system dates from the 1960\'s--still going strong. But I need knobs and especially the instruction manual because I don\'t know how to answer and use the exte…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by John Zeitler on 2012-12-05 22:32
I am looking for the cover that is a black plastic 8 3/8\" wide, 5 1/2\" high, and 2 1/8\" deep. Any idea where I can find a suitable replacement? Thanks.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by roger crosby on 2009-06-22 18:11
I have renovated my house. I have a Model RC577 chime that is not working. I seem to have all the parts, 4 chimes, motor, etc.Please help me figure out how to repair.thank you

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by joe Delle Dinne on 2011-12-20 00:25
I would like to know if spare components are still available? eg transistors and LM283T 5 pin audio amp or regulator? Or is there a replacement UNIT and what is the cost for a compatible unit.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Mike on 2025-06-05 15:12
Trying to hook up ring with the rittenhouse 531 model. Not sure how the wiring should be set up? 4 white and red wires with 0-4 posts?

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Patsy Goodwyn on 2014-09-27 23:39
We need to replace the long tubes on these chimes. They are look bad and we have lost one of them. Do you have the 4 tubes to replace the old ones with? If so, how much are they? Patsy

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Terri McDougall on 2012-04-06 14:55
Our house was built in 1978 and we purchased it in 1997. It had the Rittenhouse monitor system in place with the main unit in the kitchen and smaller units scattered thought the house and in an attached apartment. The unit has never worked since we have been here and I was wondering if it is repaira…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by v on 2007-06-19 19:52
my dilemma also. have you found a suitable replacement? thanks.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Ron Abrams on 2009-02-18 02:03
I\'m working on a unit which has been in the family for years.Emerson- Rittenhouse RC 633, 16 voltOne of the solenoid/hammers don\'t work. Seems that the hammer is jammed in the tube. I\'d like to replace the solenoid. How may I order another one.Ron 305 803-5441

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by william junker on 2010-03-20 16:08
I need a replacement part for this devise.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by scott grim on 2009-07-22 11:43
I\'ve recently come in the possesion of an emerson-rittenhouse model 633 door chime and clock. Somebody must have placed 120volts of power to the 16 volt circiut burning out all the electronics. I need all the electrical components including the hammars and motors. if anyone knows where i can get pa…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Tom Gleason on 2011-03-31 01:27
Looking for a sequencer box for a model 552 doorbell chime. I know they are rare. Does somebody make a retro fit or do you have a good used one. If none of the above then how about schemetics and I will get one made. Thanks-Tom

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by JENNIFER SMITH on 2011-09-21 15:16
I have a Ritten House Model 620R that needs to be repaired. The chimes are off of it and I have the motor ?? and clock box just needs to be put back together. I would love to have this repaired for my husband. We came across this clock out of a rental house we own and very sadley our renters damaged…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Jim Romeiser on 2011-08-18 07:20
My Rittenhouse door chime\'s top plunger does not work, the previous homeowner said when he was hooking it up, by accident the top soleniod was getting power all the time and over heated and it has not worked right since... can this be fixed ????

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Mary Anne Fuscaldo on 2009-12-25 23:04
I moved this door chime/clock when it was working from one home to another. The electrician that hooked it up did not do it correctly and I have no schematic for how it should be wired. I know it needs three wires but not sure on which of the 7 screws they get wired to. They do not indicate Com or T…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Maria on 2017-06-19 14:33
I need wiring schematic for Emerson door chime model C8578-1

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by karen varel on 2011-09-07 00:53
Do you sell parts for rittenhouse dooor chimes specifically Model #C8550 or do you know where I can get them?

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Yale Wolff on 2011-03-15 15:01
Have a Rittenhouse intercom system installed in 1956. There appears to be a dead short in the Master.Is there a NuTone Master AM/FM which will work with the satellite room units?

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Roshan on 2011-04-18 18:17
I have an old Rittenhouse intercome unit, since I don\'t use it that much, I would like to replace the face of it with something newer, don\'t know if it;s possiable? please let me know how i can do this.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Don Heeter on 2017-01-17 21:38
Dear Sirs, I have a Model RM-2.It was put in when the house was built in 1966.It does not work.Thank you for your help.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by George Pond on 2019-07-27 20:32
Can you repair the solo kids on this 1950s era doorbell?It’s generally ok except that some of the parts that slide in the tubes to ring the chimes are lost. I could send it in or you could sell me the parts to fix it myself. Thanks,George Pond

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Bill Chellberg on 2010-09-18 22:20
What transformer do I need for this?Thanks

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by vera price on 2009-07-29 12:53
I have a door bell Model C8229 that started to make a ringing sound. It looks as if the plates are vibrating.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by paul caley on 2010-10-09 16:33
plungers have stopped (tried lube) is model w clock can they be replaced by myself or must this be done by a pro or can the entire panel be more easily replaced thank you

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Vev lee on 2013-05-19 16:43
I need the wiring digram for model number c8535

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Romeiser on 2015-01-12 13:41
There is a malfunction in the Rittenhouse C8578-1 135-7351-01 door chime, disrupting the production line. Immediate repair is required to resume operations

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Larry Graham on 2011-01-02 02:03
I am looking for a wiring diagram for a Rittenhouse, Spartan Electric, Fayettevile NC C8845 unit which is 30 to 35 years old. It seems to be either able to use two D cells or 16V transformer but I am got sure how to wire it up. Any ideas? Thanks.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Maryellen Boudria on 2009-07-19 19:15
I have a Rittenhouse chime Model #410 with it\'s companion two chime on second floor of our 1927 home. The door bell chime works however we are not getting all chimes to work. Only two tones downstairs. Can this be repaired? Please advise.Also, can you tell me how old this model of Rittenhouse is?Ma…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Krzysztof Charzynski on 2014-11-26 05:14
rittenhouse model 410 not working need repair

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Paul Winchock on 2018-10-15 21:41
I have a Rittenhouse 550, 551 doorbell chime.The unit itself works fine. What I am missing (which someone was supposed to nor trash) is the transformer that sequences the chimes. Do you have a transformer for this that will work? And if so, obviously, what would one cost?Thank you for taking the tim…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by jason surrette on 2008-05-21 22:34
Don\'t know what\'s wrong with the unit. Do ya\'ll know what the input voltage is supposed to be? The back of the unit says only use a \"no. 35 transformer\".

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Richard Baer on 2012-03-06 23:58
This unit puts out a chirping sound (Similar to sound of a smoke alarm) on a continuous basis, one chirp about every 30 seconds. Please advise what I should do, short of disconnecting the unit, to stop this annoying sound.Thank you,Richard Baer

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by O. H. Towers on 2010-01-25 16:00
We are also electrical contractor company(Towers Electrical Serv. Inc)We are looking for a model C8931 R Chimer Receiver also a sender unit if possible.We cannot find any info on this item it was made ty Rittenhouse Fayettevilole, nc. 28302

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Don Meierhoff on 2013-01-01 10:50
Need a schematic for the Emerson-Rittenhouse Model rm20/rm22. Need to know transistor replacement numbers for the front end tuner.Thanks,Don

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by David Peterson on 2006-03-01 03:17
The reception is pretty poor and weak on the volume. Do your know if there is an transisterized replacement receiver that will fit into the 1970\'s model. Thanks, David......

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Robin Campbell on 2017-09-10 05:21
I have a Rittenhouse master model 550 and 551 doorbell to be tested and repair if needed.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Ken Bentham on 2017-04-25 21:05
Bell is connected to two doors. The front door works fine. The rear door won't ring at all. Can't tell what might be disconnected. Any ideas would be a big help. Thanks.Ken Bentham

—> Purchase or Repair:
➡️ Reply

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.