Rittenhouse Service & Repair Forum

we have modle m7035 the door bell and gate buzzer in still workes but the talk butten and volumne dose not. would like to fix or replace unitplease help thank you

—> Purchase or Repair: Ticket Image

— Posted by jimmy jamison on 2008-04-08

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Rittenhouse"

If you need your Rittenhouse unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 311 Comments

#Rittenhouse by Mark Ivess on 2011-08-01 00:00
Hey there, I've been tasked with looking into an issue with a Rittenhouse C8578-1 135-7351-01 door chime. I don't usually work on hardware like this, so I could really use some guidance on how to fix or replace it. Any help or advice you can provide would be greatly appreciated. Thanks in advance!—>…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Peter Taylor on 2013-02-15 23:47
I have a Ritten House Master Model 631 & 632 in my shop for repair. I would like to obtain a service manual for this item. Please advise if this is available. The clock is in bad shape as it fell of a wall and is in many pieces. Some of which I shall need to purchase.Please advise Peter TaylorTaylor…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Richard Burnham on 2021-03-28 21:10
Front and back door bells. I need a diagram showing how to connect the wires from the doorbells. Front works with one wire from Front doorbell going to Terminal B and the other going to Front in the 16 VAC group. I assumed one wire would go from Back doorbell to Terminal A and the other to Back in t…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Candy Cicoria on 2011-07-14 01:45
I recently moved into a house that has the Rittenhouse All Transistor RCM-1 system in every room. It\'s obvious this system has not worked in a few years, but I want to repair it and keep it with the time of the home. A newer system would take away from it\'s appeal. Is there anyone in the Tulsa, OK…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Clay Johnson on 2015-03-08 20:13
Please provide information or assistance regarding Rittenhouse part number C8578-1 135-7351-01, described as a door chime. Thank you.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Franklin D Bamsey on 2011-08-22 12:52
Push the outside button and the bell does not work. It has been in the house since it was build in 1988. Any suggestions?

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Sylvia on 2016-02-03 03:15
4 out of 10 times whenever I press the button it works.How do I know if the transformer that needs replacement or if the wiring itself that went wrong? I have replaced the button and it should not be the problem itself.How much would it cost if you send someone to fix it?Thanks.—> …Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by MARK WILSON on 2011-01-12 14:35
This is a Mechanical doorbell with Electronic Control Board. I need Someone to give me an estimate for repair or tell me where I can get parts for this device. Thanks, Mark Wilson

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by stan j korzinski on 2011-10-14 21:39
model c8550 8 note melody needs motor

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Dorothy \"Ann\" Imhoff on 2014-10-23 22:17
A Rittenhouse model 312 came with my home. It works but the chimes are not loud enough to heard unless you are in the room where the doorbell is mounted.I would hate to replace it because other than this it is very workable.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by P. Markworth on 2014-01-17 18:45
Do you know of anyone in Central or East Central Ohio who can repair a Rittenhouse electric door chime? It has four, short brass tubes and chimes like The Westminister chimes. Thank you.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by vero cho on 2007-06-19 19:49
sheetrocking my house after it was flooded by katrina, the contractor stupidly threw away the master station to my doorbell/radio/intercom system which rendered the system inoperable. i have asked an electrician friend to look at it and he cannot find a suitable retrofit. we will have to replace the…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Tobie Ross on 2018-04-13 02:54
I have a Sears Solid State Am-FM Master Station Radio/Intercom Model 113.35150 built by Emerson Electric. Can you repair this station. Please advise/

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by neil Berman on 2009-07-08 05:25
I have a Rittenhouse Model S7806 Smoke/Fire detector system in my 3-level condo. It was there when I moved in so there is no manual for it.My problem is, after a thunder and lightening storm the other day, I came home to find all 3 units ringing. The only way I could silence them was to switch off t…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Ron Abrams on 2009-02-18 02:03
I\'m working on a unit which has been in the family for years.Emerson- Rittenhouse RC 633, 16 voltOne of the solenoid/hammers don\'t work. Seems that the hammer is jammed in the tube. I\'d like to replace the solenoid. How may I order another one.Ron 305 803-5441

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by DeLane Smith on 2008-09-16 13:35
I need a address to send this unit to get it repaired

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by edward havertong on 2012-08-11 17:33
I TOOK THE CLOCK TO A ANTIQUE DEALER HE TOOK THE MOTOR OUT AND REPLACED IT WITH A BATTERY UNIT. I AM LOOKING TO REPLACE IT BACK WITH THE ORIGINAL MOTOR.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by bill morrison on 2006-05-03 03:40
we have an old rittenhouse intercom system. the units look old but still works fairly well. need information on how to update system look without replacing entire system. we\'re remodeling in some areas and would like to check out updating units. don\'t have specs on the system. not sure of—> …Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by tony on 2011-08-16 17:00
where can i find rittenhouse intercom/radio part??

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Jens on 2007-09-29 19:23
Hi We stock this lamp in Sweden Price is 2 $ each + shipping (mail)JENSwww.JENSIgame.comJens@jensigame.com

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by STEVE on 2013-10-30 16:58
where can i find a schematic for a rittenhouse rm-20/22 intercom am fm radio

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Dale Adams on 2006-05-28 16:30
My unit is in need of repair, can you help ?

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Joseph LaBarbera on 2012-06-11 14:33
Would like to know if there is a replacement for this unit or where I can find a replacement knob for the Talk Listen stalk.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Angela on 2015-11-22 00:03
i am looking for the cover of the door chime for the above model that needs replacing.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Robert King on 2010-08-02 01:52
I know this chime assembly is very old but is there a replacement kit for the hammers. they are sticking and perhaps the springs are just too soft. I\'d appreciate any help you can give me.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by k. chang on 2009-06-17 02:34
how do we get this old door chime to work again?we\'re already replacing the batteries, what else should we do?thanks

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Leslie Southern on 2009-06-05 13:08
We are looking for the Rittenhouse C8931R Wireless Chime Receiver.We are an electrical contractor and are working with a customer who loves her chime system but wants to expand it to other areas of her home.Can you point me in a direction to locate one of these?Thank you.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Michael Donnelly on 2012-06-05 13:26
HiI have the above chime box and wish to re assemble it. I took it down for decorating purposes.There is a black/dark blue wire, a yellow wire and a red wire. There is trans, front and rear. My question is what wire goes with what?Many thanks Michael Donnelly

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Christopher Cruz on 2011-03-09 13:15
Hellohave a 520 Beverly and it is working but I took it apart and found the rubber grommets and the felt strike pads are bad i am looking for replacements.ThanksChris

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Don Meierhoff on 2013-01-01 10:50
Need a schematic for the Emerson-Rittenhouse Model rm20/rm22. Need to know transistor replacement numbers for the front end tuner.Thanks,Don

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Eddie Ellis, Jr. on 2012-04-02 22:38
I have a Rittenhouse / Emerson intercom system with individual stations for each room. Two of the intercom speakers nolonger work. When I opened them they have one red, one yellow and one black wire leading from the unit. Is it possible to get them worked on or replaced. They measure 8 3/4\" long X …Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Galen Beaupre on 2019-06-10 14:27
I have a Rittenhouse Model 526.What would cost to test it?

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by dave walters on 2008-10-24 14:59
Just wondering i have a rittenhouse system rcm-1 and the intercom system part does not seem to be working. We can broadcast for the main unit and it is heard in the other units but when we try to broadcast from one of the other units to the main you can not hear the person ? Anysuggestions or do you…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Bob Murley on 2014-10-31 04:57
Is the volume of the chime adjustable?

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by charles thomas on 2011-09-14 17:53
I need to purchase a new door bell system comparable with the existing system. I have a one unit on the main level and the other in the basement. The Model number of the existing system is C8203 16 volts AC. I need both units to include outside switch. Also where are the transformers located for thi…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Norm Negus on 2010-12-02 00:14
Hello I have a Artolier Lighting and Sound Emerson Electric Co. Model C8535 the springs need replacing can you please Help thanks Norm

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Brandon on 2010-01-02 05:17
Please contact me about the cover of the door chime Model c8204.We lost it during repainting the wall when we moved in 2 years ago.ThanksBrandon

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Anthony Butts on 2011-10-03 12:46
The unit works, but possibly in need of some service. The AM radio works , but no FM. There is a bit of background noise in the system.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Robin Campbell on 2017-09-10 05:21
I have a Rittenhouse master model 550 and 551 doorbell to be tested and repair if needed.

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Andrew Lazazzera on 2017-01-16 17:16
HAVE --MODEL DS-2 DOOR SENTRY SAYS 'NOT TO CONNECT TO POWER SOURCE OTHER THAN STANDARD 16 VOLT CHIME TRANSFORMER'NEED TESTING OF ITS TRANSFORMER.I THINK ITS THE TRANSFORMER!WHAT IS PROCESS TO FOLLOW FOR THIS?ANDREW h=773-589-0150 c=773-899-0423

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Richard Baer on 2012-03-06 23:58
This unit puts out a chirping sound (Similar to sound of a smoke alarm) on a continuous basis, one chirp about every 30 seconds. Please advise what I should do, short of disconnecting the unit, to stop this annoying sound.Thank you,Richard Baer

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Jolene Gross on 2015-08-16 14:22
I have a Rittenhouse model c8229 door bell in my home that is not working. I would like to have it repaired.Thank you,Jolene Gross717-781-3692

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by David Hocevar on 2011-12-05 17:56
I have a ritenhouse emerson door chime unit. It just started chimeing for no reason I had to disconnect it to silence it. Now when I hooked it back up nothing happens. Clock doesn\'t work, chimes don\'t work.Model 086331 4 tubed chime It also has a teledcrome syncronis motor. Any hope for it.Thank Y…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by David Peterson on 2006-03-01 03:17
The reception is pretty poor and weak on the volume. Do your know if there is an transisterized replacement receiver that will fit into the 1970\'s model. Thanks, David......

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by randy connelly on 2010-04-12 00:59
I need a Rittenhouse door bell botton part number C8000. Is this womethign you may have?

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Martin on 2009-02-08 05:30
I have the exact same problem, but it\'s not caused by a lighted doorbell. Without the doorbell connect (and not crossing the wires) the chime mechanism keeps repeating. I\'m not sure whether it\'s because the contacts aren\'t lined up correctly or whether it\'s a wiring problem. I\'ve tinkered and …Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by TONY HOVANEC on 2011-08-09 16:09
HAD LIGHTNING STRIKE AND WOULD LIKE TO REPLACE IF YOU HAVE A RETRO UNIT TO REPLACE IT THANK YOU

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Lynn Young on 2015-09-20 19:01
Did you locate the 3 coils you were looking for ? I also need one

—> Purchase or Repair:
➡️ Reply
#Rittenhouse by Larry Yudkowitz on 2020-05-13 00:16
I have Model 380 16V. I had connected it ot a Ring Video 2 Doorbell and it worked fine for several months. Now there is a loud humm coming from the chime. I think the Ring ihas a problem. Ring says the chime may not be compatible. Ring says the model 382 is compatible. Whould you know the difference…Purchase or Repair: Ticket Image...
Show More
➡️ Reply
#Rittenhouse by Tom Bell on 2019-04-10 01:02
I have a Rittenhouse 631/632 doorbell that works ok but the clock motor is noisy. Can I buy a replacement motor for it?

—> Purchase or Repair:
➡️ Reply

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.