Rittenhouse Service & Repair Forum

I HAVE A RITTENHOUSE INTERCOM AM/FM SYSTEM , MODEL # 9042 AND I AM TRYING TO FIND OUT WHAT SIZE[POWER REQUIREMENT] TRANSFORMER [ 4 WIRE] I NEED. I DO NOT HAVE THE OLD ONE. ANY HELP WOULD BE APPRECIATED. THANKS

β€”> Purchase or Repair: Ticket Image

β€” Posted by GARY KASPRZYK on 2007-12-26

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "Rittenhouse"

If you need your Rittenhouse unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 315 Comments

#Rittenhouse by v on 2007-06-19 19:52
my dilemma also. have you found a suitable replacement? thanks.

β€”> Purchase or Repair:
#Rittenhouse by Agnes R. Kellan on 2009-11-06 01:18
I have my radio-intercom since 1969--In hasn\'t worked for about three years. I have two stations.

β€”> Purchase or Repair:
#Rittenhouse by Mark Danko on 2015-09-10 19:17
Hi, need repair to this unit, sound cuts in and out when volume control knob is turned/wiggled. Moving molex 5 pin connector on circuit board also causes power to cut in and out. Mode delector knob has become stiff to operate. Please send estimate if repair is possible, thanks

β€”> Purchase or Repair:
#Rittenhouse by Lori on 2008-12-29 00:49
Years ago lightening hit house the chime stoped working the unit is in the kitchen and of coarse the door bell at the front door to push with finger ..doesnt work anymore can this be fixed ??/

β€”> Purchase or Repair:
#Rittenhouse by mike boccio on 2015-08-28 16:39
hi I have a m7034 intercome system.The out door speak into box was flooded by our sandy storm.Needs to be replaced.The wiring is good and it would be easy to replace if I had original replacement kit. thank you mike

β€”> Purchase or Repair:
#Rittenhouse by Jack Mc Sweeney on 2008-09-10 22:29
This is a two unit intercom and door opener for apartments. Presently, it has current but buzzes the door open without pushing the switch, and has no voice tones.

β€”> Purchase or Repair:
#Rittenhouse by Don Meierhoff on 2013-01-01 10:50
Need a schematic for the Emerson-Rittenhouse Model rm20/rm22. Need to know transistor replacement numbers for the front end tuner.Thanks,Don

β€”> Purchase or Repair:
#Rittenhouse by Scott Poulos on 2009-05-23 13:59
I am looking for a replacement unit or one that is compatable and larger to cover existing hole. please respond even if you are not interested or cant get what I need so I can try elsewere.

β€”> Purchase or Repair:
#Rittenhouse by Mark Palmer on 2012-09-06 21:18
I have 2 Rittenhouse intercom speakers that need to be replaced. They both measure 9 1/4\" long. 6 1/4\" wide and 3 1/2\". Do yo have suitable replacements? If so, how much are they? Price of each unit, tax if aplicable and shipping charges for a total net price.Thanks in advance for your prompt rep…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Theresa Perkins on 2008-12-16 16:21
I would like to install my RC633 which I removed from my old house. Can you send me instructions? Thank you.

β€”> Purchase or Repair:
#Rittenhouse by Jo Ann Redmond on 2011-10-18 23:20
Good Evening,We have a Rittenhouse Intercom System (solid state Am/FM Radio Intercome) it has got to be at least 30 years old. We are looking to replace the outside speaker box (Nu-tone). Please let us know if this item is still available. We would give you more info on the system, but cannot find s…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Charles Cheshire on 2018-07-13 22:04
Cannot reset time seems stripped.Only two of the chimes work.Where are you physically located.ROUGH repair cost.

β€”> Purchase or Repair:
#Rittenhouse by Jason on 2021-11-27 23:30
I believe it was 16v AC current . not DC at least thats how mine is.

β€”> Purchase or Repair:
#Rittenhouse by Doug on 2011-10-01 20:21
I currently have this unit for sale on ebay. the wiring is simply two wires from the 16v transformer to the appropriate screw terminals on the printed circuit board and then the \"switch leg\" from each door bell button at the doors you are using attached to the corresponding terminal screw as label…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Bob Hilsher on 2010-03-27 16:29
Unit stopped working. Have 16+ volts coming to it but no sound. Assume the syncronous motor is out... Telechron model M3151, Type H18, 3.6 rpm, 60 cy, 16 v. Is the replacement motor available? Price?Could it be anything else? All wiring is in tact on board.Thanks, Bob

β€”> Purchase or Repair:
#Rittenhouse by Richard Greene on 2008-12-30 17:19
I own a late 60\'s Emerson Rittenhouse Model RC633 door bell Chime.The clock works fine but the door bell doesn\'t.I believe there is a problem with the motor.Can I have this unit repaired and approximately the cost?

β€”> Purchase or Repair:
#Rittenhouse by Larry Graham on 2011-01-02 02:03
I am looking for a wiring diagram for a Rittenhouse, Spartan Electric, Fayettevile NC C8845 unit which is 30 to 35 years old. It seems to be either able to use two D cells or 16V transformer but I am got sure how to wire it up. Any ideas? Thanks.

β€”> Purchase or Repair:
#Rittenhouse by J. G. Colbert on 2010-09-28 22:30
The rheostat is broken on this unit otherwise the unit is as melodious as it was 40 years ago.The numbers on the rheostat are 1406417 and 135-51 The motor is a Telechron synchronous motor. 118V--16 Model 3151 RPM 3. W. 4.CantI purchase the replacement rheostat and have it shipped to PMB 399 at the a…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by sue wardy on 2010-02-22 15:07
static, fade in and out radio. intercom doesn\'t work but don\'t care about that just want the fm on radio to work more consistently

β€”> Purchase or Repair:
#Rittenhouse by Karen Noll on 2009-11-16 14:27
I am looking for a cover to Rittenhouse, model 912 (possibly 812, numbers are difficult to read). Can you help?

β€”> Purchase or Repair:
#Rittenhouse by Frank Spramelli on 2015-02-10 19:04
needs repaired tuning dial is broken.

β€”> Purchase or Repair:
#Rittenhouse by Jim Fields on 2012-11-19 16:03
I have a schematic for Models M7010, M7011, M7012, M7020. The document also has AM Alignment, FM Alignment, Troubleshooting chart, and list of replacement parts for printed circuit board.

β€”> Purchase or Repair:
#Rittenhouse by Howard Hendricks on 2009-07-12 04:29
I have a Rittenhouse Chine door bell with four long poles. The model number is c8578-1, The unit will not work, I noticed two bad diodes, and removed them I am having problems locating the right ones. Is this something you can fix?

β€”> Purchase or Repair:
#Rittenhouse by john rohter on 2011-03-03 21:43
Looking for instruction for the door chime opporation.

β€”> Purchase or Repair:
#Rittenhouse by van Aree on 2009-02-26 20:19
I am looking for a copy of Rittenhouse rm5 house intercom owner\'s manual.

β€”> Purchase or Repair:
#Rittenhouse by Jeffrey on 2008-11-22 22:27
This problem may be caused by a lighted doorbell. After the bell is wrung, the light will re-illuminate. When that happens it may be drawing just enough power to make the door chimes think that the button was pressed once again. This is a repeating pattern.If a lighted door button is used, the solut…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by TONY HOVANEC on 2011-08-09 16:09
HAD LIGHTNING STRIKE AND WOULD LIKE TO REPLACE IF YOU HAVE A RETRO UNIT TO REPLACE IT THANK YOU

β€”> Purchase or Repair:
#Rittenhouse by colleen on 2010-03-10 04:32
i have a model 7035 that was removed from the wall to repair the wall. Now I need to reconnect - but don\'t know how the wires go together. Are there any instructions available?

β€”> Purchase or Repair:
#Rittenhouse by Brandon on 2010-01-02 05:17
Please contact me about the cover of the door chime Model c8204.We lost it during repainting the wall when we moved in 2 years ago.ThanksBrandon

β€”> Purchase or Repair:
#Rittenhouse by paul suter on 2007-02-12 03:05
I have a old intercom in an apartment building that has door locks, buzzer, and voice. the call and voice speaker does not work. all the other apartments are working good. Is there a replacement for the apartment units. or a upgrade?

β€”> Purchase or Repair:
#Rittenhouse by elena fernandez on 2015-02-27 06:07
Hi there, I'm interested in purchasing the Rittenhouse C8578-1 135-7351-01 door chime. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you!

β€”> Purchase or Repair:
#Rittenhouse by Paul Gilbert on 2016-06-07 01:02
Need to replace existing bell system with new Paul gilbert

β€”> Purchase or Repair:
#Rittenhouse by GUY DALFINO on 2013-01-24 17:30
I THINK I NEED A TRANSFORMER CLOCK WLL NOT RUN TX IN ADVANCE gUY

β€”> Purchase or Repair:
#Rittenhouse by A.L. Richard on 2010-08-09 13:32
My home was built in 1965 with the same Rittenhouse intercom/radio system that doesn\'t work anymore. I would like to upggrade with intercom/radio/ satellite radio system can you do the work? What would be the estimated cost?

β€”> Purchase or Repair:
#Rittenhouse by Sharon on 2016-11-27 00:16
we have an old rittenhouse intercom system. the units look old but still works fairly well. need information on how to update system. we're remodeling in some areas and would like to check out updating units. don't have specs on the system. not sure of specs but Name on the system is Ritte…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by chris on 2015-08-27 21:30
I have gone through the trouble shooting I have 16 volts to the main unit just nothing coming out of main unit. like its acting as if there is no voltage. will not power up, no intercom, no radio is it replacement time or can this be repaired relatively cheap?

β€”> Purchase or Repair:
#Rittenhouse by Mary Anne Fuscaldo on 2009-12-25 23:04
I moved this door chime/clock when it was working from one home to another. The electrician that hooked it up did not do it correctly and I have no schematic for how it should be wired. I know it needs three wires but not sure on which of the 7 screws they get wired to. They do not indicate Com or T…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by David Bergeron on 2017-10-23 07:12
wonder if I can acquire 1of the 3 boxes that throws the donger to. ring the far right chime of 3

β€”> Purchase or Repair:
#Rittenhouse by phil hartshorn on 2017-01-10 16:24
need wiring diagram for c8538r door chime

β€”> Purchase or Repair:
#Rittenhouse by John Zeitler on 2012-12-05 22:32
I am looking for the cover that is a black plastic 8 3/8\" wide, 5 1/2\" high, and 2 1/8\" deep. Any idea where I can find a suitable replacement? Thanks.

β€”> Purchase or Repair:
#Rittenhouse by mccammond99@att.net on 2016-03-19 17:03
is there anyway i could get another one of these door bells?

β€”> Purchase or Repair:
#Rittenhouse by Gregory Behr on 2026-07-21 17:40
Ive had this unit in storage for years. Its not damaged at all. Its just been sitting unused. I would like to get it back in good shape and use it as our doorbell once again after all these years.

β€”> Purchase or Repair:
#Rittenhouse by Mike on 2025-06-05 15:12
Trying to hook up ring with the rittenhouse 531 model. Not sure how the wiring should be set up? 4 white and red wires with 0-4 posts?

β€”> Purchase or Repair:
#Rittenhouse by Norm Negus on 2010-12-02 00:14
Hello I have a Artolier Lighting and Sound Emerson Electric Co. Model C8535 the springs need replacing can you please Help thanks Norm

β€”> Purchase or Repair:
#Rittenhouse by Ken Bentham on 2017-04-25 21:05
Bell is connected to two doors. The front door works fine. The rear door won't ring at all. Can't tell what might be disconnected. Any ideas would be a big help. Thanks.Ken Bentham

β€”> Purchase or Repair:
#Rittenhouse by Roy Snelgrove on 2011-02-24 02:47
The door chime is not working properly in that some of the hammers are not striking properly. sometimes they reach the tubes and sometimes not. They are all active but not as strong as they should be .I have turned down the adjuster and none strike and when turned up, it is as I have described . The…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Andrew Lazazzera on 2017-01-16 17:16
HAVE --MODEL DS-2 DOOR SENTRY SAYS 'NOT TO CONNECT TO POWER SOURCE OTHER THAN STANDARD 16 VOLT CHIME TRANSFORMER'NEED TESTING OF ITS TRANSFORMER.I THINK ITS THE TRANSFORMER!WHAT IS PROCESS TO FOLLOW FOR THIS?ANDREW h=773-589-0150 c=773-899-0423

β€”> Purchase or Repair:
#Rittenhouse by martin stacy on 2015-11-30 23:17
Hi, I just moved into house with Artolier Musician M7011 by Rittenhouse which doesn\'t work. I know you don\'t know why it doesn\'t work but any ballpark guesses at repair cost if I ship it to you? My zip is 516539 thx

β€”> Purchase or Repair:
#Rittenhouse by Steve Macha on 2026-05-28 22:10
Portion of control board was electrically shorted. Troubleshooting is underway. A circuit diagram and parts list would be helpful. How can I obtain them?

β€”> Purchase or Repair:
#Rittenhouse by Irene Shefts on 2018-04-25 21:04
Model# S7808. The detector has been making loud clicks, usually two at a time. What does this mean? Replace it or cleaning. Please help very annoying.

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.