Siemens Service & Repair Forum

Our Siemens Acramatic 2100 3-424-2130A01 monitor/controller experienced a malfunction, causing downtime on the production line earlier today. This happened at 330 PM during the afternoon shift. Can you provide a quick response before the next shift starts?

—> Purchase or Repair: Ticket Image

— Posted by ALEJANDRO PRIETO on 2014-01-27

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Siemens"

If you need your Siemens unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 123 Comments

#Siemens by Glass on 2011-12-29 21:39
Hello, there was downtime due to an issue with the Siemens 65E3226 8DJ40 drive. It happened earlier today during the morning shift. Please advise on what the next steps should be. Thank you.

—> Purchase or Repair:
#Siemens by chisty on 2023-07-06 01:40
The Siemens PE0520 is displaying a red flashing LED indicating a low input voltage alarm. Machine is currently not operational. Thanks.

—> Purchase or Repair:
#Siemens by Willians Quintino on 2025-05-16 18:13
Hi, could you please provide repair information for Siemens module 6ES7 741-0BC11-0CA1? Thank you!

—> Purchase or Repair:
#Siemens by Hoelle on 2014-02-15 03:58
Can you please confirm if the Siemens Acramatic 2100 3-424-2130A01 is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:
#Siemens by SEGOVIA on 2025-05-20 08:30
Seeking repair for Siemens 6ES5 246-4UA31 S5 PLC IP246 Inc.Positioning Module, currently not functioning. Please respond if you can assist with repairs. Thank you.

—> Purchase or Repair:
#Siemens by William LeFurgey on 2011-06-27 22:09
Experiencing issues with Siemens 685139 circuit board, E1721-A88 model. Need technical support or repair service to get back industrial unit running. Thank you.

—> Purchase or Repair:
#Siemens by John Montana on 2022-05-16 05:14
Hello, I was informed that the Siemens 6SL3210-1PB13-0AL0 unit, which is a SINAMICS G120 Power Module, is not functioning. Can you provide more details about the issue so we can troubleshoot and resolve it

—> Purchase or Repair:
#Siemens by Jennifer Walker on 2020-09-25 08:04
The Siemens 6ES7 314-1AE83-0AB0 S7 module is not working. Please check and repair as needed. Thank you.

—> Purchase or Repair:
#Siemens by Sukmawan on 2017-02-15 00:00
Hello,Thank you for reaching out. It sounds like the Siemens 6av6-643-0ba01-1ax0 unit in the warehouse is exhibiting unusual behavior. Could you please provide more details on what specifically is happening? For example, is the display not working properly, are buttons unresponsive, or is there any …Purchase or Repair: Ticket Image...
Show More
#Siemens by Manmeet Chawla on 2024-04-02 00:06
Hello, I hope this message finds you well. We are inquiring about the Siemens 6ES5 241-1AB21 IP241 Incremental Positioning Module. Could you please provide information on whether this unit is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#Siemens by Belyakov on 2018-10-14 04:56
Siemens 6SE70337EG841JF0 inverter interface just failed. Needs immediate attention!

—> Purchase or Repair:
#Siemens Sitop by Grachev on 2011-09-21 00:00
The Siemens Sitop 6EP1437-2BA00 control panel has failed; currently unsure about the description. I'll inspect and troubleshoot further once I reach the machine.

—> Purchase or Repair:
#Siemens by Lee Winquist on 2005-07-04 00:13
The Siemens 6ES7 654-5SA02-0XX0 module is not functioning. Please advise.

—> Purchase or Repair:
#Siemens by rajiv ranjan on 2009-06-25 00:00
The Siemens 6AV7428-2FA10-0BS0 PANEL isn't functioning correctly. Please investigate and make necessary repairs.

—> Purchase or Repair:
#Siemens by ruwinda sa on 2006-11-03 00:00
Thank you for reaching out about the SIEMENS 6SC6506-0AA02 unit. I understand that it is exhibiting abnormal behavior. Can you provide more details about how it is specifically acting weird? This will help me better assess the issue and provide appropriate assistance.

—> Purchase or Repair:
#Siemens by samuel on 2017-09-11 11:24
I'm sorry to hear about the issue with your Siemens 685139 E1721-A88 circuit board. It seems like something has stopped working, but I'm not entirely sure what the problem is. I recommend contacting a technician to diagnose and fix the issue

—> Purchase or Repair:
#Siemens by sajeesh on 2011-08-06 08:21
I'm interested in the Siemens 65E3226 8DJ40 drive for purchase. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Siemens by GERALD M SULLIVAN on 2008-12-05 00:00
I'm currently experiencing some issues with the Siemens 6es 5243-1ab11. The machine has stopped working, but I'm unsure about the specific problem as the description is unknown to me. Any guidance or support to troubleshoot and resolve this would be greatly appreciated.

—> Purchase or Repair:
#Siemens by Lawrence Ham on 2007-03-18 00:00
Siemens 6es5441-7la11 showing no power or response when powered on. Urgently seeking repair service to diagnose and fix the issue.

—> Purchase or Repair:
#Siemens by Yves Janin on 2024-11-17 11:17
Siemens 6ES7 212-1BA00-4BA0 S7 Module malfunctioning, affecting production line. Urgent repair needed to resume operations.

—> Purchase or Repair:
#Siemens by Klaus Eisner on 2011-08-18 19:22
Siemens 685139 E1721-A88 machine not powering on.

—> Purchase or Repair:
#Siemens by Nuno Ferreira on 2018-04-20 05:17
Siemens 6ES7 131-4BB00-0AA0 module for ET 2 not powering on and showing no indication lights. Need someone to fix it ASAP to prevent production downtime.

—> Purchase or Repair:
#Siemens by Ismail Manaqibwala on 2021-11-01 14:40
The Siemens 6SL3000-0DE25-5AA1 unit for the 55kW active line module is not working.

—> Purchase or Repair:
#Siemens by solihin on 2024-02-14 00:00
The Siemens 6se7026-0wd61 unit is not functioning and requires immediate attention from the maintenance team.

—> Purchase or Repair:
#Siemens by Aubrey Fleming on 2011-01-10 17:16
The circuit board of our Siemens 685139 E1721-A88 is malfunctioning, causing a significant disruption in our production line. This issue needs urgent attention and immediate repair to minimize downtime. Please prioritize this repair request to ensure swift resolution.

—> Purchase or Repair:
#Siemens by Emillie Getalado on 2024-11-21 05:22
Hi there, I hope you're doing well. I was asked to look into fixing or replacing the Siemens 6es5944-7ua22, however, I'm not quite sure what it does. Can this item be repaired or purchased? I'm just trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#Siemens by Marcos Y. Kono on 2011-09-19 15:52
The Siemens 65E3226 8DJ40 drive in the warehouse is not functioning as usual. It is displaying unusual behavior that is not typical of its normal operations.

—> Purchase or Repair:
#Siemens by Ruengrat on 2016-12-07 07:24
I need information on Siemens TPS-C1/160 CPU BD. Description Unknown. Please provide details and possible solutions for my client's issue. Thank you.

—> Purchase or Repair:
#Siemens Connectors by Daniela Coleman on 2025-10-08 09:17
Hi team,Were offering free articles for the trucking and logistics industry, covering topics like industry trends, driver safety, and supply chain trends.Were also happy to discuss other topics that might better fit your audience.Would you be open to discussing which topic to start with?Let me know,…...
Show More
#Siemens by Jaime Palacios on 2011-09-05 12:37
Experiencing issues with my Siemens 685139 E1721-A88 circuit board. Need repair for industrial unit ASAP. Any experts available for troubleshooting and fixing the problem?

—> Purchase or Repair:
#Siemens by Coker on 2023-10-08 23:44
The Siemens 6SN1130-1DB12-0HA0 unit is not working.

—> Purchase or Repair:
#Siemens by Kevin Block on 2025-05-20 21:48
Can you please confirm if the Siemens 6SE7021-0TA51-Z Simovert MC DC Inverter is still supported? We are in need of replacement parts or repair options for this older unit, and we are unsure of its manufacturer. Thank you.

—> Purchase or Repair:
#Siemens by Nia Kurniati on 2014-05-06 14:20
Could you please provide information on whether the Siemens Acramatic 2100 3-424-2130A01 Monitor/Controller is still supported, or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#Siemens by Sghedoni on 2024-09-26 05:19
Hello, I hope this message finds you well. We are currently in need of assistance with a Siemens S7 Module bearing the part number 6ES7 650-0EB00-0AX0. As this unit is older and its manufacturer is unknown to us, we are unsure about its current support status or the availability of replacement parts…Purchase or Repair: Ticket Image...
Show More
#Siemens by rodrigo alliende on 2011-10-17 01:45
Siemens 685139 E1721-A88 is currently down, showing error code E32. Circuit board seems to be malfunctioning. Please advise on possible causes and solutions as soon as possible. Thank you.

—> Purchase or Repair:
#Siemens by S,.N. on 2011-02-06 17:42
Siemens 685139 E1721-A88 is showing error code "E1721-A88 Circuit Board Failure". Equipment is completely offline. Please advise on next steps for repair.

—> Purchase or Repair:
#Siemens by landon on 2025-05-31 11:41
Can the Siemens 6FX8002-3AC01-1AB0 interface cable be repaired or bought? Trying to check this off my to-do list.

—> Purchase or Repair:
#Siemens by john viering on 2023-02-11 12:19
the Siemens 6SE7041-8HK85-1HA0 (Rectifier Interface Module) went down during the night shift. Need someone to check and fix it ASAP. Thanks!

—> Purchase or Repair:
#Siemens by David Smith on 2011-02-01 09:03
Our Siemens 65E3226 8DJ40 drive is still down. We need immediate assistance. Please respond

—> Purchase or Repair:
#Siemens by paul.wang on 2019-03-05 13:58
The Siemens 6ES7151-7FA21-0AB0 S7 Failsafe CPU with Profibus Interface is currently not functioning.

—> Purchase or Repair:
#Siemens by Kicthing on 2017-02-23 15:48
Hello, I am interested in purchasing the Siemens 6FC5112-0EA02-0AA0 System 840C Interface Board. Can you please let me know about the pricing and availability? I am looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#Siemens by hogan on 2024-08-27 10:37
Having issues with my Siemens 6se7024-7td51-z industrial unit, but unsure of the problem. Looking for a professional repair service to diagnose and fix the unit quickly. Thank you.

—> Purchase or Repair:
#Siemens by Pair on 2014-02-17 20:12
Can the Siemens Acramatic 2100 3-424-2130A01 Monitor/Controller be repaired or replaced? Trying to check this off my to-do list.

—> Purchase or Repair:
#Siemens by GUERRERO on 2016-02-15 04:35
Siemens 77-949-2300 840C Operator Interface Power Supply malfunctioned. Need to swap out ASAP to get machine back online.

—> Purchase or Repair:
#Siemens by Rajesh Vaidya on 2018-07-13 00:00
Siemens SICOMP-IMC 01S 200003848/09 with Kaeser Kompressoren Sigma Control is not responding to commands. Need immediate repair assistance. Thank you.

—> Purchase or Repair:
#Siemens by Raffensperger on 2011-11-30 15:06
The Siemens 685139 E1721-A88 circuit board unit is currently not functioning.

—> Purchase or Repair:
#Siemens by idioksgafsike on 2020-12-06 05:57
Siemens 6ES7193-4CL00-0XA0 terminal module is faulty. Unit down mid-shift. Please follow up during the day.

—> Purchase or Repair:
#Siemens by chris mariano on 2011-07-20 01:08
Siemens 65E3226 8DJ40 drive just failed, need immediate attention to troubleshoot and repair. Continuing with rounds.

—> Purchase or Repair:
#Siemens by Magaly Polo A. on 2006-11-14 01:20
Dear Mr or Mrs Please quote the following: 1 SOURCE OF FEEDINGSITOP120/230 VAC EXIT 24 VDC 20 AMP BRAND SIEMENS MODEL 6EP1 336-3BA001 SOURCE OF FEEDINGSITOP120/230 VAC EXIT 24 VDC 10 AMP BRAND SIEMENS MODEL 6EP1 334-ISL111 SIMATIC S7-300, ET 200 SISTEMA PERIFERIA DECENTRALIZADA BRAND SIEMENS MODEL 6…Purchase or Repair: Ticket Image...
Show More
#Siemens by anupam on 2011-12-19 14:42
Siemens 685139 E1721-A88 circuit board failure on the shop floor. Need immediate replacement to resume production.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.