Siemens Service & Repair Forum

One of the Siemens 65E3226 8DJ40 units in the warehouse is displaying unusual behavior. It's not functioning as it normally does, and its actions are erratic and unpredictable.

—> Purchase or Repair: Ticket Image

— Posted by J Murphy on 2011-04-23

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Siemens"

If you need your Siemens unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 127 Comments

#Siemens by Rachel Lovins on 2017-03-11 21:28
The Siemens 6ES5 950-8MD11 S5 Power Supply 10A unit is displaying a fault code 'F2' and emitting a continuous alarm sound. Equipment is currently offline. Please advise on necessary steps to address this issue

—> Purchase or Repair:
#Siemens by IMPUMPERY on 2011-09-24 10:24
Siemens 685139 E1721-A88 circuit board experiencing boot-up failure.

—> Purchase or Repair:
#Siemens by Lawrence Ham on 2007-03-18 00:00
Siemens 6es5441-7la11 showing no power or response when powered on. Urgently seeking repair service to diagnose and fix the issue.

—> Purchase or Repair:
#Siemens by Samuel Yonathan on 2023-11-21 00:00
Received alert for Siemens g22901-d0058-l-a1 drive or board failure. Will investigate and resolve ASAP.

—> Purchase or Repair:
#Siemens by Hoelle on 2014-02-15 03:58
Can you please confirm if the Siemens Acramatic 2100 3-424-2130A01 is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:
#Siemens by paul murney on 2011-12-12 01:45
Hi, we have a Siemens 65E3226 8DJ40 drive that needs a replacement, but we can't find one. Could you please provide repair info or suggest where we can find one? Thank you!

—> Purchase or Repair:
#Siemens by HATIM on 2025-05-19 18:06
Siemens EK-75-10-3-B equipment is down. Showing error code Hammersteuer Ung on the Controller Module. Need urgent repair. Please advise.

—> Purchase or Repair:
#Siemens by williams on 2025-05-15 23:04
Hello, I am inquiring about Siemens 6ES7 441-2AA01-7AG0 module. My client is experiencing issues with it and needs assistance. Can you please provide information on repair services available for this module? Thank you.

—> Purchase or Repair:
#Siemens by Jennifer Walker on 2020-09-25 08:04
The Siemens 6ES7 314-1AE83-0AB0 S7 module is not working. Please check and repair as needed. Thank you.

—> Purchase or Repair:
#Siemens by Chris Werner on 2011-06-10 17:24
Siemens 65E3226 8DJ40 drive not responding to control inputs.

—> Purchase or Repair:
#Siemens by Bellesfield on 2019-01-17 00:00
The Siemens 6es5243-1aa13 unit isn't working as reported.

—> Purchase or Repair:
#Siemens by john viering on 2023-02-11 12:19
the Siemens 6SE7041-8HK85-1HA0 (Rectifier Interface Module) went down during the night shift. Need someone to check and fix it ASAP. Thanks!

—> Purchase or Repair:
#Siemens by Belyakov on 2018-10-14 04:56
Siemens 6SE70337EG841JF0 inverter interface just failed. Needs immediate attention!

—> Purchase or Repair:
#Siemens Connectors by Kyree HVACservice on 2026-01-28 13:57
Hey, We send HVAC companies unlimited pre-qualified homeowners who want changeouts for $850 a month. No junk leads and no new software to learn. We just live-transfer the qualified appointments to you. I made a 2-minute video showing exactly how the math works, want me to send it over?Thanks—> …Purchase or Repair: Ticket Image...
Show More
#Siemens by Sghedoni on 2024-09-26 05:19
Hello, I hope this message finds you well. We are currently in need of assistance with a Siemens S7 Module bearing the part number 6ES7 650-0EB00-0AX0. As this unit is older and its manufacturer is unknown to us, we are unsure about its current support status or the availability of replacement parts…Purchase or Repair: Ticket Image...
Show More
#Siemens by Manmeet Chawla on 2024-04-02 00:06
Hello, I hope this message finds you well. We are inquiring about the Siemens 6ES5 241-1AB21 IP241 Incremental Positioning Module. Could you please provide information on whether this unit is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#Siemens by Pair on 2014-02-17 20:12
Can the Siemens Acramatic 2100 3-424-2130A01 Monitor/Controller be repaired or replaced? Trying to check this off my to-do list.

—> Purchase or Repair:
#Siemens by L Norman on 2014-03-22 15:20
I'm interested in purchasing a Siemens Acramatic 2100 3-424-2130A01 Monitor/Controller. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Siemens by Emillie Getalado on 2024-11-21 05:22
Hi there, I hope you're doing well. I was asked to look into fixing or replacing the Siemens 6es5944-7ua22, however, I'm not quite sure what it does. Can this item be repaired or purchased? I'm just trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#Siemens by Gino Venturelli on 2025-05-17 18:38
The Siemens 6DS1202-8AB Communication Interface Module on unit X went down mid-shift. Please investigate and troubleshoot it during the day shift. Thank you.

—> Purchase or Repair:
#Siemens by Lee Winquist on 2005-07-04 00:13
The Siemens 6ES7 654-5SA02-0XX0 module is not functioning. Please advise.

—> Purchase or Repair:
#Siemens by Dirk Dillbohner on 2025-05-18 12:36
Looking for repairs for a Siemens 6KA000-OCT/PTOO Inverter PCB as it's no longer functioning correctly. Need someone capable with experience in industrial unit repairs. Thank you.

—> Purchase or Repair:
#Siemens by packing on 2011-06-17 19:57
The Siemens 65E3226 8DJ40 unit is malfunctioning. Please take a look at it as soon as possible. Thank you.

—> Purchase or Repair:
#Siemens by Aubrey Fleming on 2011-01-10 17:16
The circuit board of our Siemens 685139 E1721-A88 is malfunctioning, causing a significant disruption in our production line. This issue needs urgent attention and immediate repair to minimize downtime. Please prioritize this repair request to ensure swift resolution.

—> Purchase or Repair:
#Siemens by Coker on 2023-10-08 23:44
The Siemens 6SN1130-1DB12-0HA0 unit is not working.

—> Purchase or Repair:
#Siemens by Magaly Polo A. on 2006-11-14 01:20
Dear Mr or Mrs Please quote the following: 1 SOURCE OF FEEDINGSITOP120/230 VAC EXIT 24 VDC 20 AMP BRAND SIEMENS MODEL 6EP1 336-3BA001 SOURCE OF FEEDINGSITOP120/230 VAC EXIT 24 VDC 10 AMP BRAND SIEMENS MODEL 6EP1 334-ISL111 SIMATIC S7-300, ET 200 SISTEMA PERIFERIA DECENTRALIZADA BRAND SIEMENS MODEL 6…Purchase or Repair: Ticket Image...
Show More
#Siemens by Mathan on 2023-10-07 00:00
the Siemens 6se7026-0ud71 unit went down mid-shift. Unknown issue. Please investigate and follow up during the day. Thanks!

—> Purchase or Repair:
#Siemens by Jaime Palacios on 2011-09-05 12:37
Experiencing issues with my Siemens 685139 E1721-A88 circuit board. Need repair for industrial unit ASAP. Any experts available for troubleshooting and fixing the problem?

—> Purchase or Repair:
#Siemens by Rajesh Vaidya on 2018-07-13 00:00
Siemens SICOMP-IMC 01S 200003848/09 with Kaeser Kompressoren Sigma Control is not responding to commands. Need immediate repair assistance. Thank you.

—> Purchase or Repair:
#Siemens by Kicthing on 2017-02-23 15:48
Hello, I am interested in purchasing the Siemens 6FC5112-0EA02-0AA0 System 840C Interface Board. Can you please let me know about the pricing and availability? I am looking to source this unit quickly. Thank you.

—> Purchase or Repair:
#Siemens by Nia Kurniati on 2014-05-06 14:20
Could you please provide information on whether the Siemens Acramatic 2100 3-424-2130A01 Monitor/Controller is still supported, or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#Siemens by JAE on 2014-02-12 17:58
The Siemens Acramatic 2100 3-424-2130A01 unit is not working and the maintenance team needs assistance with it.

—> Purchase or Repair:
#Siemens by Sergey Perov on 2012-06-23 00:00
Siemens 6SE3114-0DC40 showing no response or power when activated. Need assistance troubleshooting and repairing this industrial unit

—> Purchase or Repair:
#Siemens by Janiszewska on 2017-11-14 16:49
Can the Siemens 6SN1130-1AD11-0AA0 be repaired or bought? Just trying to check this off my to-do list.

—> Purchase or Repair:
#Siemens by Jim Goldsmith on 2025-03-06 14:57
I'm having trouble with the Siemens 6ES7 461-1BA00-0AA0 module in the machine. It seems like something has stopped working, and I'm not sure why. Can you please help me troubleshoot this issue?

—> Purchase or Repair:
#Siemens by Muhammad Shafiq on 2011-04-15 13:18
Hello, do you have a Siemens 65E3226 8DJ40 drive available for sale or repair? Our production is down, and we need to get it up and running. Thank you.

—> Purchase or Repair:
#Siemens by idioksgafsike on 2020-12-06 05:57
Siemens 6ES7193-4CL00-0XA0 terminal module is faulty. Unit down mid-shift. Please follow up during the day.

—> Purchase or Repair:
#Siemens by Bruce Welborn on 2023-03-05 01:26
The Siemens S7 module (6ES7 655-1AX13-0AX0) is not working as reported.

—> Purchase or Repair:
#Siemens by Ceccarelli on 2009-10-08 00:00
Siemens 6av6-647-0ac11-3ax0 Unit IssueHi there,I've been asked to pass along that the Siemens unit isn't working. That's all the information provided. Best regards,

—> Purchase or Repair:
#Siemens by John Montana on 2022-05-16 05:14
Hello, I was informed that the Siemens 6SL3210-1PB13-0AL0 unit, which is a SINAMICS G120 Power Module, is not functioning. Can you provide more details about the issue so we can troubleshoot and resolve it

—> Purchase or Repair:
#Siemens Connectors by Alexander Cruz on 2025-12-10 03:26
Hello, I have a few questions about your company and services. Can you reach me at 8645268528? Please text first!

—> Purchase or Repair:
#Siemens by solihin on 2024-02-14 00:00
The Siemens 6se7026-0wd61 unit is not functioning and requires immediate attention from the maintenance team.

—> Purchase or Repair:
#Siemens by sajeesh on 2011-08-06 08:21
I'm interested in the Siemens 65E3226 8DJ40 drive for purchase. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Siemens by Jason Beveridge on 2014-03-30 19:16
Hi, I'm experiencing an issue with my Siemens Acramatic 2100 3-424-2130A01. The screen is blank and unresponsive, showing no error codes or alarms. Need urgent assistance to diagnose and fix the problem.

—> Purchase or Repair:
#Siemens by hogan on 2024-08-27 10:37
Having issues with my Siemens 6se7024-7td51-z industrial unit, but unsure of the problem. Looking for a professional repair service to diagnose and fix the unit quickly. Thank you.

—> Purchase or Repair:
#Siemens by Yng on 2011-11-23 20:06
Siemens 65E3226 8DJ40 drive is down, displaying error code 5B. Urgent repair needed to resume operations.

—> Purchase or Repair:
#Siemens by Wayne Cleveland on 2014-12-23 12:06
The Siemens Acramatic 2100 3-424-2130A01 monitor/controller in the warehouse is exhibiting abnormal behavior. The unit is not functioning as usual and is acting erratically.

—> Purchase or Repair:
#Siemens by rajeev khandelwal on 2008-07-16 09:33
dear sir we from new delhi need the part no LGB 21 (made in germany) company make siemens please let me know where we get this parts thanksrajeev9868812902

—> Purchase or Repair:
#Siemens by Ronald Chong on 2018-05-22 11:46
The Siemens 6FC5303-0AA01-1AA0 unit is not functioning properly. It is described as a Connection Module.

—> Purchase or Repair:
#Siemens by GUERRERO on 2016-02-15 04:35
Siemens 77-949-2300 840C Operator Interface Power Supply malfunctioned. Need to swap out ASAP to get machine back online.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.