Taylor Electronics Service & Repair Forum

I would like to know if I can purchase the roof unit ( wind/speed indicator and wire )for the 3108 Weatherscope or if I can use a different/more current model that will work as well. I was given the Weatherscope, but I cannot access the weather/wind vane at this time. Thanks, any other info. on this unit would be most appreciated ( Manuals, etc.)David Watson

—> Purchase or Repair:

Reply🗨️Ask a New Question Below❓

• Taylor Electronics → Taylor Weathersope ↗
• Taylor Electronics → info ↗
• Taylor Electronics → Weatherscope by Taylor ↗
• Taylor Electronics → weatherscope 3108 for sale ↗
• Taylor Electronics → Weather scope. ↗
• Taylor Electronics → Taylor Electronics taylor wind speed indicator no. 3107 ↗
• Taylor Electronics → Taylor 3108 Parts ↗
• Taylor Electronics → Taylor Weatherscope #3123 Model E ↗
• Taylor Electronics → Weatherscope 3108 ↗
• Taylor Electronics → Taylor Model 3108 Weatherscope ↗
• Taylor Electronics → weatherscope 3108 ↗
• Taylor Electronics → Taylor 3107 Windspeed Indicator ↗
• Taylor Electronics → Taylor Electronics ↗
• Taylor Electronics → Taylor Weatherscope ↗
• Taylor Electronics → Is it still available? ↗
• Taylor Electronics → taylor model 3108 weatherscope, model E ↗
• Taylor Electronics → Do you have pictures? ↗
• Taylor Electronics → model 3108 weather scope ↗
• Taylor Electronics → wind vane and sensor ↗
• Taylor Electronics → Taylor 3108 Weatherscope Parts ↗
• Taylor Electronics → 3108C ↗

Recent 26 Comments

#Taylor Electronics by Leo McCarthy on 2009-01-11 08:28

Have an old? Taylor Weatherscope (cannot find a Model Number) made by Taylor Instrument Company Rochester USA. Has four separate gauges - Max/Min temperature, Barometer,wind speed and wind direction set in a solid wooden cabinet. Cable linking weathervane and wind speed indicator to instruments has …Purchase or Repair: ...Have an old? Taylor Weatherscope (cannot find a Model Number) made by Taylor Instrument Company Rochester USA. Has four separate gauges - Max/Min temperature, Barometer,wind speed and wind direction set in a solid wooden cabinet. Cable linking weathervane and wind speed indicator to instruments has been cut. Can you help re rewiring. Can you help re vintage and history of the instrument.Many thanksLeo

—> Purchase or Repair:
Show More

➡️ Reply

#Taylor Electronics by Brian Heneghan on 2017-06-27 20:24

I own an original Taylor Windscope Wind Vane w/ original "Wind Direction" indicator.After 30 years of service it needs to have the "distributor " unit either replaced or rebuilt ( currently does not show direction NE thru SE quadrant.What can you do to help ?—> …Purchase or Repair: ...I own an original Taylor Windscope Wind Vane w/ original "Wind Direction" indicator.After 30 years of service it needs to have the "distributor " unit either replaced or rebuilt ( currently does not show direction NE thru SE quadrant.What can you do to help ?

—> Purchase or Repair:
Show More

➡️ Reply

#Taylor Electronics by Thomas J. Vogelpohl on 2009-06-14 16:35

Re; Taylor Model 3108A repair person at my home has severly damaged my external thermometer prob/bulb and has also severed the 5-strand ribbon cable which connects the wind-speed/direction unit to the main guage panel. Are there any replacement prob/bulbs and ribbon cables? Is there a 5-pin connecto…Purchase or Repair: ...Re; Taylor Model 3108A repair person at my home has severly damaged my external thermometer prob/bulb and has also severed the 5-strand ribbon cable which connects the wind-speed/direction unit to the main guage panel. Are there any replacement prob/bulbs and ribbon cables? Is there a 5-pin connector which could be crimped to each cable end to permit reconnection? I am concerned about weather effects on any repair, too.Thank you for any guidance you can offer.Tom Vogelpohl513-232-0356

—> Purchase or Repair:
Show More

➡️ Reply

#Taylor Electronics by James S. Chatfield on 2006-01-07 21:04

The weathervane rod bent due to some unknown reason and when I took off the top I noticed the vectical shaft was also worn very bad. Do you sell the whole package that sits on top of the roof? The machine was in for repair back in 12/17/82, bought in Sept of 73. Rough weather up here near Rochester,…Purchase or Repair: ...The weathervane rod bent due to some unknown reason and when I took off the top I noticed the vectical shaft was also worn very bad. Do you sell the whole package that sits on top of the roof? The machine was in for repair back in 12/17/82, bought in Sept of 73. Rough weather up here near Rochester, NY where Taylor Instreuments was born. Thank you,James S. Chatfield

—> Purchase or Repair:
Show More

➡️ Reply

#Taylor Electronics by Bruce Cunningham on 2005-08-29 17:52

my SYBRON-TAYLORhas stopped recording the correct speed--at low wind speed the indicator wiggles only a small amount---at high wind speed it moves only slightly up the scale---the cups seem to rotate at different speeds ie as the wind builds to higer speeds the cups rotate faster---as best i can tel…Purchase or Repair: ...my SYBRON-TAYLORhas stopped recording the correct speed--at low wind speed the indicator wiggles only a small amount---at high wind speed it moves only slightly up the scale---the cups seem to rotate at different speeds ie as the wind builds to higer speeds the cups rotate faster---as best i can tell like they always have for the last 30 years(ie the unit doesn\'t owe me anything)-----is there anything i can check/repair short of sending the unit to you or buying a new indicator???? i have checked the flow of current between all connections--seems OK but i don\'t know what it should be??? my ACV lowest seting is 10---meter shows nothing????-----hope you can give me some good advice---thank you in advance for whatever you can suggest----bruce cunningham

—> Purchase or Repair:
Show More

➡️ Reply

#Taylor Electronics by Jeff on 2008-01-21 15:45

David,I too have become the owner of an older 3108c Weatherstation. I was fortunate enough to get the instruction booklet with it, but like you, I have no roof unit to feed it a signal.I\'ve looked around the Internet to no avail and wondered if you ever found a source for one?Thanks in advance for …Purchase or Repair: ...David,I too have become the owner of an older 3108c Weatherstation. I was fortunate enough to get the instruction booklet with it, but like you, I have no roof unit to feed it a signal.I\'ve looked around the Internet to no avail and wondered if you ever found a source for one?Thanks in advance for any help you can provide.Jeff

—> Purchase or Repair:
Show More

➡️ Reply

#Taylor Electronics by Deb McLaughlin on 2009-08-23 22:11

I have the same thing as Leo. My Dad was a weatherman for the County and I inherited this. I would love to use it but I know nothing about wiring. My cable linking the weatervane and wind speed is also cut. There is a very long wire with a metal rod on the end..not sure what that is for. Can anyone …Purchase or Repair: ...I have the same thing as Leo. My Dad was a weatherman for the County and I inherited this. I would love to use it but I know nothing about wiring. My cable linking the weatervane and wind speed is also cut. There is a very long wire with a metal rod on the end..not sure what that is for. Can anyone give me any information? I\'m not mechanical but I willing to learn.Thanks Deb

—> Purchase or Repair:
Show More

➡️ Reply

#Taylor Electronics by Matt Sloan on 2008-09-26 03:16

After reading your comments about your sensor, I realized the magnet may be one of the culprits on this issue. Over time moisture accumulates in the magnet and may weaken the field to the induction coil. The induction coil in the Taylor anemometer heads are often weakened by time - temp changes etc.…Purchase or Repair: ...After reading your comments about your sensor, I realized the magnet may be one of the culprits on this issue. Over time moisture accumulates in the magnet and may weaken the field to the induction coil. The induction coil in the Taylor anemometer heads are often weakened by time - temp changes etc. 30+ yrs of use. The coil end braids come undone, but yours is still reading out. There are also two capacitors in the back of the meter and they sometimes lose charge during wind lulls. There are also two adjusting potentiometers in the back of the meter. These can calibrate the windspeed. I find taking a small 6v battery sometimes fills the capacitors back to full thus making the windspeed work again. Just make sure if you do this, to do it momentarily and without the generator unit attached. The Taylor also has a rubber piece in the center of the magnet, make sure it isn\'t rubbing the bearing plate, it slows the cup operation. You might want to consider a set screw in the outer cup hub, Taylor windspeed generators have a tendency to blow off during windstorms. I have had several 3107s. They are quite accurate if maintained. -Matt

—> Purchase or Repair:
Show More

➡️ Reply

#Taylor Electronics by Tom Whelan on 2011-12-31 19:56

Hello:I have acquired a Weatherscope by Taylor (wooden box with 4 gauges) Brand new, never used. It has all the parts except the wind vane for direction.Do you sell them? if not, I can\'t seem to find a picture of it so I can fabricate one for this unit.Great looking older unit, would love to get it…Purchase or Repair: ...Hello:I have acquired a Weatherscope by Taylor (wooden box with 4 gauges) Brand new, never used. It has all the parts except the wind vane for direction.Do you sell them? if not, I can\'t seem to find a picture of it so I can fabricate one for this unit.Great looking older unit, would love to get it up and working.Thank You!Tom Whelan

—> Purchase or Repair:
Show More

➡️ Reply

#Taylor Electronics by David R. Watson on 2006-03-31 19:51

I would like to know if I can purchase the roof unit ( wind/speed indicator and wire )for the 3108 Weatherscope or if I can use a different/more current model that will work as well. I was given the Weatherscope, but I cannot access the weather/wind vane at this time. Thanks, any other info. on this…Purchase or Repair: ...I would like to know if I can purchase the roof unit ( wind/speed indicator and wire )for the 3108 Weatherscope or if I can use a different/more current model that will work as well. I was given the Weatherscope, but I cannot access the weather/wind vane at this time. Thanks, any other info. on this unit would be most appreciated ( Manuals, etc.)David Watson

—> Purchase or Repair:
Show More

➡️ Reply

#Taylor Electronics by Ray Orobona on 2008-11-17 16:09

I am looking for the anamometer cups of the above Taylor weatherscope. One of the cups broke in transit and I need a replacement for only the three cup assembly...not thr bottom sender..However,if I have to purchase the entire assembly I would gladly do so.Thank you,Ray Orobona—> …Purchase or Repair: ...I am looking for the anamometer cups of the above Taylor weatherscope. One of the cups broke in transit and I need a replacement for only the three cup assembly...not thr bottom sender..However,if I have to purchase the entire assembly I would gladly do so.Thank you,Ray Orobona

—> Purchase or Repair:
Show More

➡️ Reply