Weko for Service call 1-336-969-0110 at Industrial Electronics Repair

Weko Service & Repair Forum

The sensor on Weko AA 7904 has failed, need to replace a drive or board ASAP. Keep me updated on the progress with the repair.

—> Purchase or Repair:

— Posted by Snowcreek on 2014-12-26

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Weko"

Weko → Weko KD-NR:HDM 5E.110.1481/01 NR:140.172485/23 0044401 ↗
Weko → Weko AA 7904 ↗

If you need your Weko unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 130 Comments

#Weko - Weitmann & Konrad Gmbh by Dennis Campbell on 2009-04-23 16:13

We have a Heidelberg printing press with a Weko control box.AFK-BK-SE 03Art.: 007664E800937 /001220/60/24/5.5V 50-60HzNDM 58.110.031/U01When the press failes to send a sheet of paper properly into the in-feed the control box is supposed to send a signal to take the machine off of impression, stop th…Purchase or Repair:

#Weko - Weitmann & Konrad G by jerry asare asante on 2009-02-18 04:35

Dear Sir/Madam, please i need an electrical part of my offset printing machine called MILLER TP 41 the part name and numbers is as fellows: CHASSIS + BESTUCKUNG as indicated on the circuit diagram1) TSV 042 DBK II 2) TSV 020 AFKI I3) TSV 010 BK IIIPlease this are the three electrical part that i nee…Purchase or Repair:

#Weko by Asbury on 2014-02-20 04:00

The unit isn't working. Please assist.

—> Purchase or Repair:

#Weko by Mia on 2014-11-26 09:14

My Weko AA 7904 sensor is malfunctioning and needs repair urgently. Looking for a technician who can address the issue

—> Purchase or Repair:

#Weko by Robert Wise on 2014-12-24 20:44

Weko AA 7904 sensor malfunction.

—> Purchase or Repair:

#Weko by Lahm on 2014-12-03 08:30

Hello, the Weko AA 7904 sensor unit is still down. This issue needs urgent attention. Please provide a reply at your earliest convenience.

—> Purchase or Repair:

#Weko by Gustavo on 2013-11-02 00:52

Can the Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401 sensor be repaired or bought? Trying to check this off my to-do list.

—> Purchase or Repair:

#Weko by cejudo on 2014-02-25 00:41

Hello, I am inquiring on behalf of my client regarding the Weko AA 7904 sensor with part number AA 7904. They are experiencing issues with it and require assistance. Kindly provide further details on the repair process and any potential solutions.Thank you.

—> Purchase or Repair:

#Weko by Thomas Calvert on 2014-12-18 00:44

Hello, I'm looking to check off some items on my to-do list. Can the Weko AA 7904 sensor be repaired or purchased?

—> Purchase or Repair:

#Weko by Vesna on 2007-04-01 00:00

Hello, the Weko KD-NRHDM 5E.110.1481/01 sensor is malfunctioning, constantly showing error code E4. Equipment is unable to detect materials properly. Urgent attention needed to resolve the issue.

—> Purchase or Repair:

#Weko by amrik on 2014-02-18 18:19

The Weko AA 7904 sensor unit is not working as described.

—> Purchase or Repair:

#Weko by Aldo G. Quilang on 2014-05-01 11:20

I have noticed that one of the units in the warehouse, most likely the Weko AA 7904 sensor, is not functioning as usual. It is exhibiting strange behavior that is not typical for its regular operations.

—> Purchase or Repair:

#Weko by Shirley Lane on 2014-12-30 07:54

My client is experiencing issues with their Weko AA 7904 sensor. Can you provide information on troubleshooting steps and potential solutions for this problem?

—> Purchase or Repair:

#Weko - Weitmann & Konrad G by Cherry on 2012-07-05 07:57

In my Weko - Weitmann & Konrad GmbH electronic monitoring system for miller tp 104 in this system got burn when we run for 10 hours, how much it will cost for new one and how many days it\'ll get.my mobile no 0094 71 6805549Best regardsCherry

—> Purchase or Repair:

#Weko by Tom Coco on 2013-02-23 07:23

We experienced downtime due to a sensor issue with Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401. We need to address this before the next shift.

—> Purchase or Repair:

#Weko - Weitmann & Konrad G by bobby goldstein on 2009-08-13 04:45

there are a few things to check first,being press trip sometime the first thing i\'d look for is a cold solder joint or burt contacts on the output relay, also the intergation sensor could be going bad

—> Purchase or Repair:

#Weko by Dennis Lund on 2013-07-17 19:44

I am interested in purchasing the Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401 sensor. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#Weko by Buckingham on 2014-04-05 12:29

The sensor in our Weko AA 7904 machine is malfunctioning, affecting the production line. Please send a repair technician immediately to address the issue and minimize downtime.

—> Purchase or Repair:

#Weko by Belinda on 2013-08-06 12:32

Hello, do you have a replacement Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401 sensor available for purchase or repair? Production is currently halted, and I need to get it back up and running quickly. Thank you.

—> Purchase or Repair:

#Weko - Weitmann & Konrad Gmbh by Ralf Gebert on 2020-10-26 08:29

Dear Sir/MadamWe have come across a old WEKO SUM-7295 unit, and it seems that the sensors (opposed mode Tx/Rx) are faulty, and need a manual to see what the interface unit needs on the input side. Is it pull down(npn) or pull up (pnp), hence the requirement for a manual.Your assistance is appreciate…Purchase or Repair:

#Weko by Richie on 2014-02-18 17:19

The Weko AA 7904 unit is currently not working. It's a sensor, but I recommend consulting the maintenance team for further assistance.

—> Purchase or Repair:

#Weko by Daniel Anton on 2013-08-08 11:32

Our Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401 sensor is still down. We urgently require assistance. Please provide a

—> Purchase or Repair:

#Weko by Krug on 2013-04-20 16:05

We had downtime due to a sensor issue on the Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401. Need quick answer before next shift.

—> Purchase or Repair:

#Weko by Jürgen Reichling on 2014-12-14 14:04

Hello, I am reaching out regarding a Weko AA 7904 sensor unit. We are looking to determine if this unit is still supported or if there are replacement parts available. Could you please provide information on the availability of support or parts for this older unit? Thank you.

—> Purchase or Repair:

#Weko by syafiq Barakuan Mr on 2014-02-18 22:19

Sensor issue on Weko AA 7904 affecting production line, urgent repair needed. Line downtime occurring, immediate attention required to resume operations.

—> Purchase or Repair:

#Weko by sevic on 2014-05-07 02:20

Can the Weko AA 7904 sensor be repaired or replaced? I'm trying to cross this off my to-do list.

—> Purchase or Repair:

#Weko by ANI OTOIBHI on 2014-12-25 16:06

Can the Weko AA 7904 sensor be repaired or replaced? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:

#Weko by Nash on 2014-12-17 03:44

Hi team, just wanted to report that the Weko AA 7904 unit, which is a critical sensor, malfunctioned earlier today causing some downtime. This occurred at approximately 1030 am. Can someone please investigate and provide feedback before the next shift starts? Thank you.

—> Purchase or Repair:

#Weko by kut on 2013-10-28 00:34

The Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401 sensor unit is not working.

—> Purchase or Repair:

#Weko by Farah on 2014-05-03 12:20

The sensor on the Weko AA 7904 is faulty, affecting the production line. Please address this issue immediately to minimize disruption.

—> Purchase or Repair:

#Weko - Weitmann & Konrad G by Mr.vijaykumar on 2008-05-06 14:55

part no. EI -HRN110350 ART NR 17613NR.216 1134256/006

—> Purchase or Repair:

#Weko by Robert keith on 2012-02-14 00:00

Control unit on Weko HBM 5E.110.14B1/01 not responding to input signals. Need immediate repair service to diagnose and fix the issue.

—> Purchase or Repair:

#Weko by Snowcreek on 2014-12-26 01:06

The sensor on Weko AA 7904 has failed, need to replace a drive or board ASAP. Keep me updated on the progress with the repair.

—> Purchase or Repair:

#Weko by Nishino on 2014-03-11 10:43

Could you please confirm if the Weko AA 7904 sensor can be repaired or if a new one needs to be purchased? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:

#Weko by Mike Bowman on 2014-12-23 12:44

Please provide an update on the status of the Weko AA 7904 sensor. It is imperative that we receive assistance

—> Purchase or Repair:

#Weko - Weitmann & Konr by Pedro G Li on 2012-08-17 01:19

Dear sir:Please let me know if you may repairit. it is used on printing pressMiller TP 74s, aprox cost lead timeand complete addressthanksPedro G Li

—> Purchase or Repair:

#Weko by snel on 2013-07-30 05:32

Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401 is still down. Please provide an update as soon as possible.

—> Purchase or Repair:

#Weko by Ashcraft on 2014-02-14 13:58

We are experiencing a critical issue with the Weko AA 7904 sensor affecting our production line. Urgent repair is needed to minimize downtime and disruptions to our operations. Please take immediate action to resolve this issue

—> Purchase or Repair:

#Weko by Rod Saunders on 2013-04-30 16:33

Sensor Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401 failing on the production line. Urgent repair needed to resume operations

—> Purchase or Repair:

#Weko - Weitmann & Konrad G by Md. Shahnewaz on 2014-01-04 18:31

Excellent company. ..

—> Purchase or Repair:

#Weko by Almaria on 2014-09-07 04:20

Hello, do you have a Weko AA 7904 sensor available for sale or repair? Our unit has stopped working and we need to keep production running. Thank you.

—> Purchase or Repair:

#Weko by martin stacy on 2014-12-25 10:44

Could you please confirm if the Weko AA 7904 Sensor unit is still supported or if replacement parts are available for it? It's an older unit, and we're unsure about the manufacturer. Thank you.

—> Purchase or Repair:

#Weko by NAVAB on 2013-08-12 18:32

I'm experiencing issues with the Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401 sensor. It seems like something has stopped working, and I'm not entirely sure why. Could you please provide guidance or support on troubleshooting this problem?

—> Purchase or Repair:

#Weko - Weitmann & Konrad G by Wegener Nieuwsdruk Twente on 2009-05-28 09:35

Can you please send us an indication of price of:Weko papercontroleye nr. 514.284700/015Weko art.nr. 202202 type RLT

—> Purchase or Repair:

#Weko - Weitmann & Konr by LOIC on 2019-10-16 14:48

Hello,I am looking for a box Weko 200430 for my miller TP74 of 1989cordiallyL. Valotto

—> Purchase or Repair:

#Weko by Walker on 2014-02-19 15:19

I have noticed that one of the units in the warehouse is behaving unusually. The sensor seems to be acting erratically and not functioning as it normally does.

—> Purchase or Repair:

#Weko by M. Salman Mughal on 2013-07-01 10:47

Hello, I am interested in purchasing the Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401 sensor. Could you please provide information on pricing and availability? I am hoping to source one quickly. Thank you.

—> Purchase or Repair:

#Weko by Keith Benton on 2013-07-18 23:55

Can you please confirm if the Weko KD-NRHDM 5E.110.1481/01 NR140.172485/23 0044401 sensor is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:

#Weko - Weitmann & Konrad Gmbh by Asim on 2007-10-17 07:56

Need model no. T6-03S for PO25 Super 1col. offset machine, India.

—> Purchase or Repair:

#Weko by Tim Grant on 2014-03-31 01:16

Do you have a Weko AA 7904 sensor available for sale or repair? Our unit is currently down, and we need to keep production running.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.