Troubleshooting Z: Common problems and repair info

Z for Service call 1-336-969-0110 at Industrial Electronics Repair

Z Service & Repair Forum

If you need your Z tested or repaired then give us a call. We offer free estimates and offer extended warranties. You can contact us at 1-(336)-969-0110 Shipping/Receiving Industrial Electronic Repair 931-E S. Main St #204, Kernersville, NC 27284 Phone: (336) 969-0110 We repair industrial electronic devices If you have an industrial electronic device that needs repair, Feel free to contact us!

— Posted by Sales on 2005-05-09

Reply🗨️Ask a New Question Below❓

Recent 80 Comments

#Zebtronics by Euan on 2011-10-30 00:00

Do you have a Zebtronics SE 11-04-60 available for sale or repair? Our unit has gone down, and we need to keep production running.

➡️ Reply

#Zetron by cimenti on 2014-12-30 18:54

Could you please confirm if the Zetron 18+ 901-9287 is still supported, and if there are any replacement parts available for its circuit board?

—> Purchase or Repair:

➡️ Reply

#Zellweger Uster 811v5 by FRANCISCO Piqueras on 2025-09-03 19:22

Request Service for Zellweger Uster 811v5Model/Part : Zellweger Uster 811v5

—> Purchase or Repair:

➡️ Reply

#Zetron by Lewis Marquez on 2014-12-27 05:06

Hello, I'm reaching out on behalf of a client who needs assistance with a Zetron 18+ (part number 901-9287), specifically regarding the circuit board. Can you provide information on repair options and estimated costs? Thank you.

—> Purchase or Repair:

➡️ Reply

#Z-Axis by paul caley on 2010-10-15 22:40

The Z-Axis V21404023 43040-002 unit is displaying unusual behavior in the warehouse. It is not functioning as expected, but without a description of its normal operation, further details are unknown.

—> Purchase or Repair:

➡️ Reply

#Zema Elettronica by Solovyev Aleksey on 2012-07-09 08:08

Hello!We have a problem with the card serial number z 92 controlloMATR ¹ 109048 003-C3-20REV F LCEach time you start the engine start is delayed for 3 minutesPlease help solve this problemTo speak English poorlyWith respect the chief engineer

—> Purchase or Repair:

➡️ Reply

#Zurn Industries by VINEETH RAJ on 2011-06-14 11:19

TOP URGENT Dear Sir, Please quote your best price & delivery for the following items at the earliest,01.COUPLING SHAFT ( PART NO: 302A7696P001R)REF NO: 307A9220G01, LIST: 1313, POS, 1 ACCESSORYCOUPLING FRAME: 9 GT, ‘’HAND K’’QTY: 1 EAPLEASE PROVIDE DATASHEET OR CATALOGUE ALONG WITH YOUR OFFER AND AL…Purchase or Repair:

➡️ Reply

#Z-Axis by greg migues on 2010-01-07 05:29

Hello, I am interested in purchasing the Z-Axis V21404023 43040-002 unit. Can you please provide me with information on pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:

➡️ Reply

#Z-Axis by lorvand on 2010-11-17 11:17

Please confirm if the Z-Axis V21404023 43040-002 unit is still supported or if replacement parts are available for it. It's an older unit, and we're unsure of the manufacturer. Thank you.

—> Purchase or Repair:

➡️ Reply

#Zetron Inc by Patrick on 2009-01-07 20:04

What are the default COM settings to communicate between my computer and the Zetron Model 640 DAPT XTRA.

—> Purchase or Repair:

➡️ Reply

#Z-World Inc by thorson on 2019-05-09 00:00

Hello, I'm interested in purchasing a Z-World Inc BL1700 Circuit Board. I am not completely sure if this is the correct model, but my team suggested I inquire here. Could you please provide information about pricing and availability? I am looking to source one quickly. Thank you.—> …Purchase or Repair:

➡️ Reply

#Zellweger Uster Technologies by Monzur Raiha on 2009-05-23 09:52

Dear Sirs,One of our customers wants to buy a a sets of complete uster lab for used in Spinning mills.They prefered uster 4/ 5.Kindly offer us.Bes regards,Monzur Raihan

—> Purchase or Repair:

➡️ Reply

#Zurn Industries by Bryan on 2008-10-17 15:22

We provide accessory couplings for the GE Frames 3, 5, 6, 7, and 9 gas turbines. You can reach us at 281-585-5635.

—> Purchase or Repair:

➡️ Reply

#Z-Axis by Crockett on 2010-04-07 04:26

Hello, I need repair info for the Z-Axis V21404023 43040-002. Something stopped working and we need a replacement. Can you provide repair details

—> Purchase or Repair:

➡️ Reply

#Zurn Industries by Syed Mohammed Hussain on 2012-08-07 17:47

Please quote your best price and delivery for the Coupling Part No 302A7696P001

—> Purchase or Repair:

➡️ Reply

#Zimmer Electronic Systems Zes by Wayne Kendall on 2011-08-11 21:14

I need a new sound head and cord, is that something you can supply?

—> Purchase or Repair:

➡️ Reply

#Zetron Inc by sautin on 2006-10-14 18:38

dear sir. could you be so kind to send me zetron model35 manual.thank you

—> Purchase or Repair:

➡️ Reply

#Zetron by jimmy jamison on 2014-08-26 15:43

Machine is displaying error code E34 signaling a circuit board issue.

—> Purchase or Repair:

➡️ Reply

#Z-Axis by Stehberg on 2010-11-14 00:08

The Z-Axis V21404023 43040-002 unit is exhibiting unusual behavior, different from its normal functionality. The specific issue is not described, but it is acting erratically or unexpectedly.

—> Purchase or Repair:

➡️ Reply

#Z-Axis by Gene Nantel on 2010-04-25 15:38

I'm experiencing some issues with the Z-Axis V21404023 43040-002. It seems like something has stopped working, but I'm not sure what exactly. Could you please provide some guidance or assistance? Thank you.

—> Purchase or Repair:

➡️ Reply

#Zhijie Electronic by Edgar on 2024-07-13 23:37

The Zhijie Electronic PQ32/30-40305A board is displaying error code E23 and not powering on. Need urgent assistance to get the equipment back up and running.

—> Purchase or Repair:

➡️ Reply

#Zapi Inc by Abbas Ghoreishi on 2008-08-31 13:10

Dear Technical Manager, I introduce myself as the managing director of Fanavarane Partow Danesh (FPD) Co. which is an Iranian engineering company with various fields of activity. Though it\'s a young company but honored to have a seasoned technical team with engineers who have many years of experien…Purchase or Repair:

...Dear Technical Manager, I introduce myself as the managing director of Fanavarane Partow Danesh (FPD) Co. which is an Iranian engineering company with various fields of activity. Though it\'s a young company but honored to have a seasoned technical team with engineers who have many years of experience in their career. Our main field of activity is repair, overhaul, maintenance and providing electrical systems as UPS, rectifier, inverter, frequency converter etc. Recently we\'ve been contacted by an Iranian glass company which uses Italcarrelli machines and the machines are equipped with Zapi drivers in turn. Italcarrelli machine type is TPEN and Zapi type is Dual-SEM3. As we\'re reported, the MTBF of Zapi drivers is very short. In some cases their life span is 1 month or even shorter! At the moment we aren\'t seeking the reason of their failure but we\'ve been asked to repair them. The system given to us has the following sticker: F78008 – CHOP .Dual-SEM3 00/700 MAT: 05 45 300972131 At first step we checked the power boards and found them healthy, then changed some of the ICs of the controller board. The customer has an instrument that connects to the system and sets the parameters. When the customer engineer tried to connect to the system, that instrument showed no connection and the engineer told that its micro controller (SAF-C517A-LN) has been failed, so he used the control board of another system which its microcontroller was SMD type. Unfortunately after connecting battery to the system and starting the machine, the Mosfets of one of the power boards exploded. We think the problem related to the control board so we switched to the first control board. What we did next was repairing the power boards completely and got a SAF-C517A-LN from the customer which they\'d bought some for repair purpose from Italy. We Installed it on the board and substituted almost all ICs though there was no sign of burn on the control board. We also checked the diodes, capacitors and resistors and all were ok. The ICs which remained intact were U15(MM74HC244N), U16(MM74HC373N), U17(MX27C512), U10(93C46W), U6(ST62T25C6), U5(UC2843), U4(MM74HC14N) and U1(CNY17-3), because from our point of view they were all ok. Last week we went to the customer factory and loaded the system on the Italcarrelli machine, connected the battery and started the machine. The wheels started running but after some seconds stopped working. The instrument which set parameters was connected to the system and it gave the alarm R V FIELD NOT OK. Then we tried back motion, the wheels rolled backward but again after some seconds stopped again. What I should note is that as soon as the system was energized its LED started blinking 7 times then after a short stop the period repeated again. What we did was substituting U17(MX27C512) and U6(ST62T25C6) with the ICs of another board and started the system. This time the wheels didn\'t move and we faced a new alarm CHOPPER NOT CONFIG, so we removed the 2 ICs and installed the origin ICs. It\'s strange to say that the status didn\'t change, that is, the wheels didn\'t move and the alarm was again CHOPPER NOT CONFIG. Of course we were lucky that during this series of tests the power boards faced no damage. Now we hope to get a useful solution from you to be able to remove the problem. We appreciate your reply in advance. Best Regards Abbas GhoreishiManaging DirectorFanavarane Partow Danesh Co.Suite A1, No:1140, Satarkhan St.,Tehran, IranPhone: +9821 44 268 690Fax: +9821 44 260 580Email: Ghoreishi@fpd-eng.ir

—> Purchase or Repair:
Show More

➡️ Reply

#Zimmer Electronic Systems Zes by on 2011-08-01 23:02

my unit probably needs a sound head and cable, is that something you can help me with?

—> Purchase or Repair:

➡️ Reply

#Zema Elettronica by Stefano on 2010-12-02 16:01

Devo fare delle tarature su un programmatore CTR100 di un asimca 3007. Vorrei informazioni o documentazione per sincronizzare la partenza incollatore.

—> Purchase or Repair:

➡️ Reply

#Zellweger Uster by FRANCISCO on 2025-09-02 20:44

Request Service for Zellweger UsterModel/Part : Zellweger Uster 811V5

—> Purchase or Repair:

➡️ Reply

#Zema Elettronica by Maria Janiero on 2010-12-08 10:16

Dear Sirsplease kindly inform us whether you can supply us with:a control panel for a Simca machine which was principally equipped with a Zema Elettronica panel.A swift response would be very much appreciated.Thank youMaria Janiero

—> Purchase or Repair:

➡️ Reply

#Zander Aachen by Nicandro T. Lumain on 2008-09-10 06:21

Dear Sir, I would like to ask for a quotation for our electronic monitor use by our SK19 air compressor. Thanks, N. Lumain GMC Electrical Maintenance 3408888

—> Purchase or Repair:

➡️ Reply

#Zetron by Imran Ali Khan on 2006-07-11 14:29

The Zetron 18+ 901-9287 is experiencing a critical issue where calls are not being forwarded to the designated lines as programmed. This is severely impacting our production line efficiency. Urgent repair service is required to resolve this issue immediately.

—> Purchase or Repair:

➡️ Reply

#Z-Axis by Sulbaran on 2010-03-25 06:55

Hi, the Z-Axis V21404023 43040-002 is not moving, appears to be stuck in position. No error code displayed. Please advise on next steps for troubleshooting and repair.

—> Purchase or Repair:

➡️ Reply

#Zetron by Ed Whitcomb on 2025-09-08 17:33

Just checking to see if you are still repairing Zetron Model 18+ RTUs?ThanksEd

—> Purchase or Repair:

➡️ Reply

#ZAP by Zack Marella on 2025-01-03 19:43

The power supply unit (ZAP EZP-06-05, 24V 4A) is failing, causing a shutdown of the production line. Immediate repair service is required to resume operations

—> Purchase or Repair:

➡️ Reply

#Zerotakt by jose vicente on 2012-02-07 00:00

Zerotakt 57448-255 not powering on, no display. Need immediate repair assistance.

➡️ Reply

#Z-Axis by sarvoday Kumar on 2010-02-15 18:03

Hello, I am following up on the previous message regarding the Z-Axis V21404023 43040-002 unit. It is still down and I need someone to address this issue immediately. Please respond

—> Purchase or Repair:

➡️ Reply

#Zareba by Barry Sachs on 2017-09-30 07:32

I have a Zareba 8900-B Electric Fence Controller that is no longer working properly. The unit is not supplying power to the electric fence, and there is no indication of any power output when I test it. I have checked the connections and the fence itself, both of which seem fine. I suspect there may…Purchase or Repair:

➡️ Reply

#Zeck by ANTONIO CANNAROZZI on 2006-05-25 13:33

I am locking to find out any supplyer where to buy one power supply AT for PC Manufactured by ZECK Model.ZKS-9101

—> Purchase or Repair:

➡️ Reply

#Zetron by Hesham Farouk Ibrahim on 2014-10-17 14:03

The Zetron 18+ 901-9287 circuit board is not working properly.

—> Purchase or Repair:

➡️ Reply

#Zeck by Hery Mulia on 2008-03-28 10:09

Dear Sir,We need Power Supply Zeck for our buy.Model: ZKS - 520T .Input: 115/230 Volt, 4A/3A, 60/50 Hz.Qty : 1 Unit.Would you please quote to us with your best price.We are waiting your reply soon to PT. Guna Sejahtera Mandiri - Kelapa Gading (Indonesia), by fax no: 62-21-4506493.Regards,Hery Mulia …Purchase or Repair:

➡️ Reply

#Zworld Inc by Fiorenzo on 2013-04-30 00:00

Urgent Repair Needed for BL1700 Circuit BoardHi there, the BL1700 Circuit Board in our equipment seems to have failed. We are experiencing constant error code "E27" and the machine is unable to power on properly. Please provide

—> Purchase or Repair:

➡️ Reply

#Zetron by Steve Sanneman on 2014-11-28 08:16

Our Zetron 18+ 901-9287 experienced downtime due to a circuit board issue earlier today. This occurred around 1030 AM. Can you investigate and provide feedback before the next shift starts? Thank you!

—> Purchase or Repair:

➡️ Reply

#Zurn Industries by kponniah on 2008-09-13 16:20

Please quote for accessory gear coupling G.E.art no: 302A7696P001

—> Purchase or Repair:

➡️ Reply

#Zetron by Onder Demirel on 2006-06-22 02:34

The Zetron 18+ 901-9287 system is experiencing severe line disruptions, resulting in unacceptable downtimes. Urgent action is needed to restore functionality and production efficiency as soon as possible.

—> Purchase or Repair:

➡️ Reply

#ZAP by Faraz Malik on 2025-05-26 12:12

The ZAP EZP-07-05 power supply unit in the warehouse is malfunctioning - it is displaying unusual behavior and not functioning as expected.

—> Purchase or Repair:

➡️ Reply

#Zetron by Brad Bagwell on 2006-12-11 01:00

The Zetron 18+ 901-9287 unit is not working.

—> Purchase or Repair:

➡️ Reply

#Zetron by Shaun on 2006-06-20 05:32

The Zetron 18+ 901-9287 is experiencing constant screen freezing, hindering production line operations. Urgent repair needed to prevent further delays.

—> Purchase or Repair:

➡️ Reply

#Z-Axis by Flavio Cruz Herrera on 2010-03-11 13:30

The Z-Axis V21404023 43040-002 unit stopped working mid-shift. Please check and troubleshoot the issue tomorrow.

—> Purchase or Repair:

➡️ Reply

#Zelko Screen Industries Inc. by John Daly on 2016-04-02 18:44

Hello, do you have a Zelko Screen Industries Inc. TP 12 04101-01 Touch Keypad Panel available for repair or purchase? Our unit is down, and we need to keep production running. Thank you.

—> Purchase or Repair:

➡️ Reply

#Zellweger Uster Technologies by kiani on 2012-07-25 09:10

dear sirs,we need complete set of uster 5 for cotton spinning factory.second handed in good condition. pls. send us your offer if you have any.rgrds,Kianinasab

—> Purchase or Repair:

➡️ Reply

#Zetron by Volvogak on 2014-12-04 06:23

Could you please confirm if the Zetron 18+ 901-9287 is still supported or if replacement parts are available for this unit?

—> Purchase or Repair:

➡️ Reply

#Zetron by SALMAN on 2014-02-15 17:58

We experienced unexpected downtime due to a malfunction in the Zetron 18+ 901-9287 circuit board today at 330 pm. Could you please investigate and provide immediate feedback before the next shift starts? Your

—> Purchase or Repair:

➡️ Reply

#Zema Elettronica by jolanfore on 2012-07-09 20:24

Hello everyone. Who knows where to get latches?..It should be

—> Purchase or Repair:

➡️ Reply

Z Service & Repair Forum

Reply🗨️Ask a New Question Below❓

Recent 80 Comments

Contact Us

🚑Shop Location🛠️

📞Phone

📦Mailing Address🚛