Rittenhouse Service & Repair Forum

Is there a new updated unit (with new bells & whistles) that can use the existing wiring and wall recesses of the old units. If so, where can I get them and what would be a ballpark pricing? Thanks

β€”> Purchase or Repair: Ticket Image

β€” Posted by Earl Miller on 2012-10-11

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "Rittenhouse"

If you need your Rittenhouse unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 312 Comments

#Rittenhouse by Mark Hefner on 2012-05-18 01:33
I have a emerson rittenhouse rcm 4 main unit with IR6 speakers throughout a house i purchased and am interested in upgrading the entire system. Is there a replacement system where it can be changed out?It will be a few months before I am ready to do it, but am trying to look at options and replaceme…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Barbara on 2006-08-27 17:45
This is an old system I would like to replace. Does the wire plugs have to be replaced. I would like sm=omthing that will be compatable with the wire plugs. Do you have any suggestionsThank You

β€”> Purchase or Repair:
#Rittenhouse by Sandra on 2015-02-13 19:13
Our old doorbell cover on our doors is broken, how and where can we find new or different( maybe clear plastic cover) for the doorbell Thank you

β€”> Purchase or Repair:
#Rittenhouse by Lynn Villano on 2011-05-06 13:29
but want door bell to continue working. Can we get wiring schematics?

β€”> Purchase or Repair:
#Rittenhouse by Jennifer Walker on 2009-04-26 01:22
I have read several threads asking about updating an old Rittenhouse system. I would like to do the same, hopefully avoiding the need to replace drywall, etc., since this system is considerably larger than the Nutone products. I couldn\'t find any responses addressing whether or not there were solut…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Cyndi Taylor Krier on 2010-11-17 22:19
Can I order a replacement transformer for this doorbell from you?

β€”> Purchase or Repair:
#Rittenhouse by Lynn Young on 2015-09-20 19:01
Did you locate the 3 coils you were looking for ? I also need one

β€”> Purchase or Repair:
#Rittenhouse by Dick Dingman on 2009-04-20 19:15
I purchased this residential unit in 1986. It is now giving a significant hum and does not produce all of its chimes.Does this give you a clue as to repairability?

β€”> Purchase or Repair:
#Rittenhouse by Cathy Kirkwood on 2014-08-21 21:30
I purchased a home in Honeoye Falls, NY. It has an RCM 3 intercom that works and I would like to get a manual for it. Is it possible to get instructions for it?

β€”> Purchase or Repair:
#Rittenhouse by scott grim on 2009-07-22 11:43
I\'ve recently come in the possesion of an emerson-rittenhouse model 633 door chime and clock. Somebody must have placed 120volts of power to the 16 volt circiut burning out all the electronics. I need all the electrical components including the hammars and motors. if anyone knows where i can get pa…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by dan mazzola on 2017-02-17 16:32
need a sequence timer for a emerson rittenhouse model # 632 631

β€”> Purchase or Repair:
#Rittenhouse by Deborah Braid on 2009-12-14 16:48
I have an old rittenhouse 7021 (I think) it is from 1978. It needs a new from cover and the dial to change the stations doesn\'t work. Otherwise it works. Can it be fixed and about how much?

β€”> Purchase or Repair:
#Rittenhouse by Dale Adams on 2018-05-15 14:40
I need my rcm 4 repaired or replaced

β€”> Purchase or Repair:
#Rittenhouse by paul suter on 2007-02-12 03:05
I have a old intercom in an apartment building that has door locks, buzzer, and voice. the call and voice speaker does not work. all the other apartments are working good. Is there a replacement for the apartment units. or a upgrade?

β€”> Purchase or Repair:
#Rittenhouse by Roshan on 2011-04-18 18:17
I have an old Rittenhouse intercome unit, since I don\'t use it that much, I would like to replace the face of it with something newer, don\'t know if it;s possiable? please let me know how i can do this.

β€”> Purchase or Repair:
#Rittenhouse by Robert King on 2010-08-02 01:52
I know this chime assembly is very old but is there a replacement kit for the hammers. they are sticking and perhaps the springs are just too soft. I\'d appreciate any help you can give me.

β€”> Purchase or Repair:
#Rittenhouse by Howard Hendricks on 2009-07-12 04:29
I have a Rittenhouse Chine door bell with four long poles. The model number is c8578-1, The unit will not work, I noticed two bad diodes, and removed them I am having problems locating the right ones. Is this something you can fix?

β€”> Purchase or Repair:
#Rittenhouse by Peter Taylor on 2013-02-15 23:47
I have a Ritten House Master Model 631 & 632 in my shop for repair. I would like to obtain a service manual for this item. Please advise if this is available. The clock is in bad shape as it fell of a wall and is in many pieces. Some of which I shall need to purchase.Please advise Peter TaylorTaylor…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by George Pond on 2019-07-27 20:32
Can you repair the solo kids on this 1950s era doorbell?It’s generally ok except that some of the parts that slide in the tubes to ring the chimes are lost. I could send it in or you could sell me the parts to fix it myself. Thanks,George Pond

β€”> Purchase or Repair:
#Rittenhouse by edward havertong on 2012-08-11 17:33
I TOOK THE CLOCK TO A ANTIQUE DEALER HE TOOK THE MOTOR OUT AND REPLACED IT WITH A BATTERY UNIT. I AM LOOKING TO REPLACE IT BACK WITH THE ORIGINAL MOTOR.

β€”> Purchase or Repair:
#Rittenhouse by Anthony Butts on 2011-10-03 12:46
The unit works, but possibly in need of some service. The AM radio works , but no FM. There is a bit of background noise in the system.

β€”> Purchase or Repair:
#Rittenhouse by Harry Yagi on 2017-05-11 12:40
Due to the worn-weakened spring on the hitting bar which do not pop out from the solenoid hole. Do you sell the spring or the entire solenoid with the hitting bar?

β€”> Purchase or Repair:
#Rittenhouse by v on 2007-06-19 19:52
my dilemma also. have you found a suitable replacement? thanks.

β€”> Purchase or Repair:
#Rittenhouse by Bob Przybylski on 2018-11-28 01:06
I have a Rittenhouse door bell model c8355 and the transformer (that is what I think it is) has failed & does nothing but hum. Can I get a new transformer? or can I buy a replacement at the local home depot or Lowes?

β€”> Purchase or Repair:
#Rittenhouse by Withgott on 2012-04-13 00:00
Having issues with my Rittenhouse RCM-4 intercom with radio - the radio feature is not working. Need repair assistance

β€”> Purchase or Repair:
#Rittenhouse by Francis Roberts on 2007-05-24 22:32
Need new springs for the hammers. This is an old door bell and it has lasted about 40 years. The new ones are sick. This is the best I have heard and would like to keep it another 40 years.

β€”> Purchase or Repair:
#Rittenhouse by phil hartshorn on 2017-01-10 16:24
need wiring diagram for c8538r door chime

β€”> Purchase or Repair:
#Rittenhouse by Earl Miller on 2012-10-11 01:03
Can I use the existing wiring and recessed wall areas of the old system listed above with a new replacement system. If so, what new updated system will work? Thanks

β€”> Purchase or Repair:
#Rittenhouse by Mark Danko on 2015-09-10 19:17
Hi, need repair to this unit, sound cuts in and out when volume control knob is turned/wiggled. Moving molex 5 pin connector on circuit board also causes power to cut in and out. Mode delector knob has become stiff to operate. Please send estimate if repair is possible, thanks

β€”> Purchase or Repair:
#Rittenhouse by Michael Donnelly on 2012-06-05 13:26
HiI have the above chime box and wish to re assemble it. I took it down for decorating purposes.There is a black/dark blue wire, a yellow wire and a red wire. There is trans, front and rear. My question is what wire goes with what?Many thanks Michael Donnelly

β€”> Purchase or Repair:
#Rittenhouse by Larry Yudkowitz on 2020-05-13 00:16
I have Model 380 16V. I had connected it ot a Ring Video 2 Doorbell and it worked fine for several months. Now there is a loud humm coming from the chime. I think the Ring ihas a problem. Ring says the chime may not be compatible. Ring says the model 382 is compatible. Whould you know the difference…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Gord on 2011-11-24 21:00
Jessica:I have the same model door chime, with the same problem. How did u make out with yours? Do you know any of the history of this chime. From what I can surmise, it was produced after WW2 and that would fit as it was in my parents house when i was born in 1954. I have a friend that is an electr…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Doug on 2011-10-01 20:21
I currently have this unit for sale on ebay. the wiring is simply two wires from the 16v transformer to the appropriate screw terminals on the printed circuit board and then the \"switch leg\" from each door bell button at the doors you are using attached to the corresponding terminal screw as label…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by John Medina on 2013-02-22 19:58
Ubit was working fine, decided to hook up old style HI-FI unit per instructions and started blowing fuses. Looks like I created a short! Can you give me an idea of cost to repair and shipping charges? Thanks, John Medina

β€”> Purchase or Repair:
#Rittenhouse by Marlene Ilijanich on 2024-06-26 02:50
Hello, I purchased my 4 note-8 note melody door chime in 1995. It has been set up on a battery operation operation

β€”> Purchase or Repair:
#Rittenhouse by Hal Hester on 2016-07-09 23:01
Similiar issue, my doorbell kept sticking. So I replaced the sticky button but now my springs inside the bell housing seem to be sprung and unable to move the plunger the full range to ring or retract.

β€”> Purchase or Repair:
#Rittenhouse by David on 2018-03-04 18:16
Have you ever heard of a response on the Rittenhouse 631/632. I too am refurbishing one and need to know the correct tranformer voltage needed and a wiring diagram surely would help. Any insight?

β€”> Purchase or Repair:
#Rittenhouse by Jason on 2021-11-27 23:30
I believe it was 16v AC current . not DC at least thats how mine is.

β€”> Purchase or Repair:
#Rittenhouse by Colleen Wilkowski on 2011-04-28 15:24
I am searching for a User Manual for the Rittenhouse M9041 AM/FM Radio-Intercom system. The unit is original to the house built in 1982. I have found a tech manual with schematics but now need to locate a User Manual. Any suggestions would be appreciated. Thanks.

β€”> Purchase or Repair:
#Rittenhouse by macgretz on 2017-04-19 20:58
I have a Rittenhouse Emerson Elec Model C8326 (perhaps 1960's) that has stopped working today. The chimes and housing seem okay, but the mechanism and bell button are old and worn out. Do you have replacement parts - and at what cost?

β€”> Purchase or Repair:
#Rittenhouse by David Hocevar on 2011-12-05 17:56
I have a ritenhouse emerson door chime unit. It just started chimeing for no reason I had to disconnect it to silence it. Now when I hooked it back up nothing happens. Clock doesn\'t work, chimes don\'t work.Model 086331 4 tubed chime It also has a teledcrome syncronis motor. Any hope for it.Thank Y…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by colleen on 2010-03-10 04:32
i have a model 7035 that was removed from the wall to repair the wall. Now I need to reconnect - but don\'t know how the wires go together. Are there any instructions available?

β€”> Purchase or Repair:
#Rittenhouse by carolyn berkey on 2011-08-04 23:15
our unit has power and the light comes on but nothing works. The electrician says it is not the transformer.

β€”> Purchase or Repair:
#Rittenhouse by Jolene Gross on 2015-08-16 14:22
I have a Rittenhouse model c8229 door bell in my home that is not working. I would like to have it repaired.Thank you,Jolene Gross717-781-3692

β€”> Purchase or Repair:
#Rittenhouse by Eddie Rodriguez on 2019-10-13 21:47
I have a Master Model 631 & 632, The clock stop working. its showing the red dot on the face of the clock that indicates power failure. The chimes still work fine with no issue. Can you provide instruction on how to test and/or repair. Thank youEddie

β€”> Purchase or Repair:
#Rittenhouse by Kirk Niatsikas on 2014-12-11 19:16
Do you have a rittenhouse rm5 manual?

β€”> Purchase or Repair:
#Rittenhouse by David Strodel on 2010-12-05 00:34
Hi, I have a Rittenhouse 330 Chime that is not working. Is there a way to get a rough estimate of cost? It may be the transformer or the hammers as they are sticky.David

β€”> Purchase or Repair:
#Rittenhouse by Leslie Southern on 2009-06-05 13:08
We are looking for the Rittenhouse C8931R Wireless Chime Receiver.We are an electrical contractor and are working with a customer who loves her chime system but wants to expand it to other areas of her home.Can you point me in a direction to locate one of these?Thank you.

β€”> Purchase or Repair:
#Rittenhouse by Corinne Censulla on 2012-02-29 17:56
I have a very old doorbell/ clock combination. The Model # is 450. The chimes work but not the clock. Since it is installed into the wall is there one the will replace using the same insert?

β€”> Purchase or Repair:
#Rittenhouse by DeLane Smith on 2008-09-16 13:35
I need a address to send this unit to get it repaired

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.