Advance Industries Service & Repair Forum

I am looking for another or a replacement for the Touch n go (390-19mhz) remote that I now have. As far as I can tell it was from 1985 and is analog. It is for my \"Overhead Door\" garage door opener from the early 1970\'s. I would love to get another one for my wifes car. Thank you

—> Purchase or Repair: Ticket Image

— Posted by Gordon Truex on 2014-04-02

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by vu on 2009-12-31 18:48
Hello, I hope this message finds you well. I am reaching out regarding the Advance Industries 116220 D 107243-0002 board. Our team is looking to locate a replacement or repair option for this unit. Since it is older and we are unsure of the manufacturer, could you please confirm if this unit is stil…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Israel on 2014-12-12 03:16
I need an immediate update on the status of the Advance Industries 116220 D 107243-0002 circuit board. The unit is still down. Please provide a response

—> Purchase or Repair:
#Advance Industries by JIM on 2008-10-01 19:53
COULD YOU POINT ME IN THE RIGHT DIRECTION FOR A MANUAL FOR A 116220D? I;M TRYING TO DISABLE THE TIMER OR ADD PHOTO EYES.

—> Purchase or Repair:
#Advance Industries by GEORGE SUTTON on 2009-02-23 12:04
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior - it is not functioning as it normally does.

—> Purchase or Repair:
#Advance Industries by Crispian on 2009-05-23 15:59
The Advance Industries 116220 D 107243-0002 board malfunctioned and caused downtime today during the afternoon shift. Need resolution urgently.

—> Purchase or Repair:
Experiencing issues with Advance Industries 116220 D 107243-0002 board, not functioning properly. Urgently seeking repair services.

—> Purchase or Repair:
#Advance Industries by Babur on 2009-11-19 16:31
Machine not powering up.

—> Purchase or Repair:
#Advance Industries by walter zambrana on 2012-04-22 18:37
I would like to replace the 2 remotes controls that I have. the following information is: FCC ID: BSH8YN106546. FREQ. 360- MFG91 168.Your response by E-mail will be really appreciate.

—> Purchase or Repair:
#Advance Industries by ismael on 2014-02-19 07:19
The Advance Industries 116220 D 107243-0002 circuit board malfunctioned causing unexpected downtime earlier today around 1130 am. Need to resolve this issue before the next shift starts. Any insights or suggestions would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by Brian Chiddick on 2009-09-01 17:31
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by manny on 2005-12-21 00:47
Logic timer board in Advance Industries 116220D 107243-0002 is malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by Sandra Contreras on 2009-12-11 02:24
Hello, I hope you're doing well. I was asked to get the Advance Industries 116220 D 107243-0002 board fixed or replaced. Before making a decision, may I know if it's possible to repair this board or if it needs to be purchased new? I'm trying to get this resolved as soon as possible. Thank you for y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Helvie on 2009-12-04 02:00
Please advise if the Advance Industries 116220 D 107243-0002 board is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by danny morales on 2012-04-04 03:50
I have this board in my gate opener and need to find owner manual or just need to find out how to hook up the coaxial receiver to this board 760 252 9000

—> Purchase or Repair:
#Advance Industries by Savoskin on 2009-11-25 04:52
Need help fixing Advance Industries 116220 D 107243-0002 board. We can't get it to power up, all lights remain off. Send someone ASAP. Thanks!

—> Purchase or Repair:
#Advance Industries by Jen Massey on 2014-05-02 10:20
Could you please confirm if the Advance Industries 116220 D 107243-0002 circuit board is still supported or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Advance Industries by virenderm mudgil on 2015-08-12 16:20
Could you please provide information on whether the Advance Industries 116220 D 107243-0002 Gate Control Board is still supported or if replacement parts are available?

—> Purchase or Repair:
#Advance Industries by Donald Marcotte on 2013-01-21 16:15
I am looking for a circuit board Advanced Industries model No. 116220 D P/N 107243-0002 LOGIC TIMER

—> Purchase or Repair:
#Advance Industries by CHE on 2009-10-18 17:47
I'm experiencing some issues with the Advance Industries 116220 D 107243-0002. It seems like there might be a problem with the board, as something has stopped working. I'll make sure to get this checked out and fixed as soon as possible.

—> Purchase or Repair:
#Advance Industries by Igor Tustanowski on 2009-01-18 04:58
Do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by McSpadden on 2009-11-17 20:23
I'm sorry, but something seems to be off with the Advance Industries 116220 D 107243-0002 board. It appears to have stopped working properly.

—> Purchase or Repair:
#Advance Industries by Ikerman on 2009-03-11 13:11
Hello, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Howard on 2009-10-20 17:32
We experienced downtime with the Advance Industries 116220 D 107243-0002 unit today due to a board issue. The incident occurred during the night shift around 1130 PM. Can you provide insights on what might have caused it before the next shift begins?

—> Purchase or Repair:
#Advance Industries by Gustavo Gil on 2009-07-29 01:00
The Advance Industries 116220 D 107243-0002 board is showing error code E102. Equipment is not powering up despite multiple restart attempts. Please advise.

—> Purchase or Repair:
#Advance Industries by jarvis on 2009-11-04 10:40
the Advance Industries 116220 D 107243-0002 board went down mid-shift. Need someone to check it out and troubleshoot ASAP. Thanks!

—> Purchase or Repair:
#Advance Industries by Michelle Hurley on 2014-01-07 19:22
We experienced downtime with the Advance Industries 116220 D 107243-0002 circuit board earlier today around 230 PM. Can you provide some insight into what might have caused the issue? It's crucial information we need before the next shift begins. Thank you!

—> Purchase or Repair:
#Advance Industries by MesusantAnges on 2009-12-29 10:17
Equipment 116220 D 107243-0002 is down. Error code 005 blinking red on display. Unable to power on or operate. Please advise on next steps. Thank you.

—> Purchase or Repair:
#Advance Industries by john stinger on 2015-07-25 22:20
I will reach out to the manufacturer to inquire if the Advance Industries 116220 D 107243-0002 Gate Control Board is still supported and if replacement parts are available.

—> Purchase or Repair:
#Advance Industries by daniele on 2009-11-29 14:19
I've noticed that the Advance Industries 116220 D 107243-0002 is experiencing issues seems like something stopped working on the board. It may require further inspection to determine the exact problem.

—> Purchase or Repair:
#Advance Industries by Nathan Franco on 2009-08-20 21:45
Hi, we are inquiring about part number 116220 D 107243-0002 for Advance Industries. The component is described as a board. Could you provide details on its repair availability and estimated turnaround time? Thank you.

—> Purchase or Repair:
#Advance Industries by mohammed on 2009-06-26 13:28
The unit "Advance Industries 116220 D 107243-0002" is not functioning. Please have a look at it. Thank you.

—> Purchase or Repair:
#Advance Industries by DENISENKO on 2009-12-12 14:44
The Advance Industries 116220 D 107243-0002 is showing error code E043. Equipment is not powering up. Please advise on next steps for troubleshooting and repair.

—> Purchase or Repair:
#Advance Industries by ENGLISH on 2009-03-11 18:11
The Advance Industries 116220 D 107243-0002 board is not functioning properly. Please address the issue

—> Purchase or Repair:
#Advance Industries by Mr.Simon on 2015-07-30 16:20
Can the Advance Industries 116220 D 107243-0002 Gate Control Board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by Jose Diaz on 2006-11-08 22:57
The control board on our Advance Industries 116220-D 107243-0002 is malfunctioning, causing a production line halt. We need urgent repair service to address this issue and resume operations

—> Purchase or Repair:
do you have the light board that plugs into the 116220d timer board

—> Purchase or Repair:
#Advance Industries by Stephen Thompson on 2009-11-06 21:59
Machine producing blank boards, unable to cut components.

—> Purchase or Repair:
#Advance Industries by dennis yost on 2013-12-27 15:43
i need to replace 1 black box for a horton opener brand name - Horton easy access number on the board inside box - 107846-0001 Freq - 360 Mfg - 92 48 Fcc Id: BSH8YN107846Unable to find item on Google or EbayIs it still available? thanks dennis

—> Purchase or Repair:
#Advance Industries by Ziganay on 2009-07-08 06:22
Hello, my Advance Industries 116220 D 107243-0002 board is malfunctioning and in need of repairs. Looking for a technician to help resolve the issue quickly.

—> Purchase or Repair:
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this issue and get the line running smoothly again.

—> Purchase or Repair:
#Advance Industries by martin zarate on 2005-12-30 01:51
The logic timer board on our Advance Industries 116220D 107243-0002 is malfunctioning, causing an interruption in the production line. We need immediate repair service to rectify the issue and resume operations swiftly.

—> Purchase or Repair:
#Advance Industries by Joseph Snow on 2011-01-21 14:15
Need a manual for a 24 volt AC power door opener, in order to hook it up

—> Purchase or Repair:
#Advance Industries by Cherrington on 2015-08-10 00:20
Hello, our Advance Industries 116220 D 107243-0002 Gate Control Board is displaying error code E05 and the gate is not responding to any commands. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Hasan Ahmed Syed on 2006-10-26 23:27
The control board (116220-D 107243-0002) on the production line is malfunctioning, causing disruptions and delays. Immediate repair service is needed to restore full production capacity.

—> Purchase or Repair:
#Advance Industries by furqan on 2009-12-07 14:18
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in our warehouse. It is not performing its usual functions.

—> Purchase or Repair:
#Advance Industries by Lee Hodson on 2015-03-31 07:04
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working.

—> Purchase or Repair:
#Advance Industries by bekZitteeGeom on 2006-04-11 19:35
The control board on the Advance Industries 116220-D 107243-0002 is malfunctioning, causing a significant disruption to the production line. Immediate repair or replacement is necessary to resume operations without further delay.

—> Purchase or Repair:
#Advance Industries by James Rowling on 2014-02-16 22:58
The Advance Industries 116220 D 107243-0002 circuit board unit is malfunctioning and needs attention from the maintenance team.

—> Purchase or Repair:
#Advance Industries by Lebedev on 2014-12-18 09:44
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Bonnie Briggs on 2021-03-31 20:15
I have 2 remote garage door openers made by Advance Industries, Shelbyville, IN. One works very well. The other was kept in storage and the battery inside leaked and corroded the battery connector. These use a 9-volt battery. The FCC ID number is BSH8YN106546 and the MFG. number is 081587. The Freq.…Purchase or Repair: Ticket Image...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.