Advance Industries Service & Repair Forum

Please contact me asap about my board repair, I thank it was shiped on friday, thats what i need to know. Thank you Bret Moore

—> Purchase or Repair: Ticket Image

— Posted by Bret Moore Sonoran Industrial air power on 2008-06-30

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Cases on 2009-02-01 15:49
Hello, I am reaching out on behalf of my client regarding part number 116220 D 107243-0002 from Advance Industries. The description of the issue is related to the board. Could you please provide information on repair services available for this part? Thank you.

—> Purchase or Repair:
#Advance Industries by DeeAnne on 2005-08-30 23:03
Hi,I am in desparate need of a wiring diagram for an Advance industries 116220D board for a Mckinney Electronics operator. We need to add a reflective detector and the board we have does not have a labelled terminal block. We would appreciate any information you might have.Thanks,DeeAnne—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Gordon Truex on 2014-03-28 13:52
Can you tell me if it is possible to get a replacement remote for a Touch n Go remote I purchaced in 1985. It is coded 390-19. there is an antenna model 702, ser#751015 if that helps. also the door opener is a model R80-az. Thank you

—> Purchase or Repair:
#Advance Industries by lajcsi on 2009-12-26 08:17
The board on Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. Urgent repair or replacement is needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by Dennis McCollums on 2009-11-19 17:31
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse.

—> Purchase or Repair:
#Advance Industries by aziz fayek aziz on 2009-10-20 12:32
Issue The Advance Industries 116220 D 107243-0002 board is not powering on.

—> Purchase or Repair:
#Advance Industries by Manoj Bhandarkar on 2009-12-03 20:32
Hi there, I need repair info for Advance Industries 116220 D 107243-0002 board. Can you provide details ASAP? Thank you!

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-04-02 13:14
I am looking for another or a replacement for the Touch n go (390-19mhz) remote that I now have. As far as I can tell it was from 1985 and is analog. It is for my \"Overhead Door\" garage door opener from the early 1970\'s. I would love to get another one for my wifes car. Thank you—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by James Rowling on 2014-02-16 22:58
The Advance Industries 116220 D 107243-0002 circuit board unit is malfunctioning and needs attention from the maintenance team.

—> Purchase or Repair:
#Advance Industries by NIKHIL DOSHI on 2009-10-18 18:47
Hi there, I hope this message finds you well. We have an Advance Industries 116220 D 107243-0002 board that we're looking to find a replacement or repair option for. This unit is older, and we're unsure if it's still supported or if parts are still available for it. Could you please let us know if s…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Ostermann on 2009-06-24 14:44
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by coflienoblofs on 2009-12-03 23:32
the Advance Industries 116220 D 107243-0002 board went down mid-shift. Needs checking first thing in the AM. - Night shift team

—> Purchase or Repair:
#Advance Industries by Savoskin on 2009-11-25 04:52
Need help fixing Advance Industries 116220 D 107243-0002 board. We can't get it to power up, all lights remain off. Send someone ASAP. Thanks!

—> Purchase or Repair:
#Advance Industries by monty clifcorn on 2014-09-23 23:23
The tag over three box relays says MFD. ADVANCE INDUSTRIES, APPLETON, WIS. with the controller model no. tagged on the circuit board. I may need a new board or repair to the board. One of the relays continues a slow click as long as the opener is plugged in to power. Please advise. Thanks.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Corey love on 2009-03-11 04:11
Could you please provide me with pricing and availability details for the Advance Industries 116220 D 107243-0002 board? I am looking to source one quickly and would appreciate your

—> Purchase or Repair:
#Advance Industries by Ikerman on 2009-03-11 13:11
Hello, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by McSpadden on 2009-11-17 20:23
I'm sorry, but something seems to be off with the Advance Industries 116220 D 107243-0002 board. It appears to have stopped working properly.

—> Purchase or Repair:
#Advance Industries by Amy L. Jones on 2014-11-01 18:57
Circuit board in the Advance Industries 116220 D 107243-0002 just failed - need a replacement ASAP!

—> Purchase or Repair:
I need assistance with Advance Industries part number 116220 D 107243-0002, which is a Gate Control Board. My client is experiencing issues with this board and we would like more information on possible repairs or replacements. Thank you.

—> Purchase or Repair:
#Advance Industries by Carolyn McCrary on 2009-12-14 06:48
"Unit 116220 D 107243-0002 board failure during night shift. Needs attention ASAP. - Maintenance Crew"

—> Purchase or Repair:
#Advance Industries by Steve DeLurgio on 2009-03-11 22:11
Hello, can the Advance Industries 116220 D 107243-0002 board be repaired or purchased? I'm trying to resolve this as part of my to-do list. Thank you.

—> Purchase or Repair:
#Advance Industries by chris corey on 2016-02-17 20:03
im looking to replace a bsh8yn229 remote

—> Purchase or Repair:
#Advance Industries by Susnjevic on 2009-07-28 15:42
I'm currently facing an issue with the Advance Industries 116220 D 107243-0002. It seems like there's a problem with the board, causing the machine to stop working properly. I will need to investigate further to determine the exact nature of the issue.

—> Purchase or Repair:
#Advance Industries by Leach on 2014-04-03 17:29
The circuit board in Advance Industries 116220 D 107243-0002 just went out, causing a machine shutdown. Need immediate replacement to keep the line running.

—> Purchase or Repair:
#Advance Industries by Nikita on 2009-06-27 12:07
Hello, we have an issue with the Advance Industries 116220 D 107243-0002 board. Could you please provide repair information or a replacement as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by bekZitteeGeom on 2006-04-11 19:35
The control board on the Advance Industries 116220-D 107243-0002 is malfunctioning, causing a significant disruption to the production line. Immediate repair or replacement is necessary to resume operations without further delay.

—> Purchase or Repair:
#Advance Industries by Jeremiah Albright on 2009-09-03 07:12
Hello, the Advance Industries 116220 D 107243-0002 is currently down. The display is showing Error Code 4 and there is a constant alarm going off. Please advise on potential causes and next steps for repair. Thank you.

—> Purchase or Repair:
#Advance Industries by sumesh on 2009-07-19 20:15
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. I was told to get this fixed or replaced, but I'm not sure what it does. Can this board be repaired or purchased as a replacement? I'm looking to check this off my to-do list. Thank you.

—> Purchase or Repair:
I'm working with Advance Industries 116220 D 107243-0002, and the board seems to be the issue. The equipment is down, and I'm not sure why. No error code is displaying. Please advise on next steps to troubleshoot.

—> Purchase or Repair:
#Advance Industries by Jerry Fields on 2011-05-12 15:21
I need to purchase 2 ea. Advance Industries Garage Door OpenersFCC ID: BSH8YN213

—> Purchase or Repair:
#Advance Industries by Curran on 2009-09-14 12:12
Looking for repair for an Advance Industries 116220 D 107243-0002 board. Unit not functioning, need a technician ASAP.

—> Purchase or Repair:
#Advance Industries by DENISENKO on 2009-12-12 14:44
The Advance Industries 116220 D 107243-0002 is showing error code E043. Equipment is not powering up. Please advise on next steps for troubleshooting and repair.

—> Purchase or Repair:
#Advance Industries by Stanleycib on 2015-10-28 11:28
Hey, the Gate Control Board (116220 D 107243-0002) just failed. Need to replace it ASAP to get the machine back online.

—> Purchase or Repair:
#Advance Industries by Charles Donnell on 2009-12-29 14:17
The Advance Industries 116220 D 107243-0002 board is currently not functioning. Please check it out as soon as possible. Thank you.

—> Purchase or Repair:
#Advance Industries by atilla on 2009-06-23 01:10
Hello, I am interested in purchasing the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are in urgent need of sourcing one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by HESAM on 2009-08-13 05:45
Hello, I need someone to repair my Advance Industries 116220 D 107243-0002 board. It's malfunctioning and affecting our production. Your urgent attention is greatly appreciated.

—> Purchase or Repair:
Please contact me asap about my board repair, I thank it was shiped on friday, thats what i need to know. Thank you Bret Moore

—> Purchase or Repair:
#Advance Industries by Lind on 2014-05-03 05:20
Advance Industries 116220 D 107243-0002 experiencing extensive circuit board failures disrupting production line. Urgent repair service needed to restore operations ASAP.

—> Purchase or Repair:
#Advance Industries by Ron on 2009-08-21 11:38
Hello, I'm reaching out to inquire about repair information for an Advance Industries 116220 D 107243-0002 board that has stopped working. Could you provide details on how we can repair or replace it quickly? Thank you.

—> Purchase or Repair:
#Advance Industries by nardini on 2009-10-05 07:41
The Advance Industries 116220 D 107243-0002 board malfunctioned earlier today, causing significant downtime in the production. This occurred at 1030 AM, disrupting our operations. I need a quick resolution or workaround before the next shift starts. Thank you.

—> Purchase or Repair:
#Advance Industries by Lee gregory on 2009-07-23 18:55
Hello, we are in need of repair information for an Advance Industries 116220 D 107243-0002 board. Can you please provide details on how to fix or replace it? Thank you.

—> Purchase or Repair:
#Advance Industries by Temitope Egunjobi on 2014-11-28 17:16
The Advance Industries 116220 D 107243-0002 unit is currently not functioning. Maintenance team is aware and investigating the issue.

—> Purchase or Repair:
#Advance Industries by Jacky on 2009-03-29 04:00
I would like to inquire if you have an Advance Industries 116220 D 107243-0002 board available for purchase or repair. Thank you.

—> Purchase or Repair:
#Advance Industries by sutrisno on 2015-07-24 14:43
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working properly.

—> Purchase or Repair:
#Advance Industries by Burhanettin SEN on 2009-12-18 19:06
The board for the Advance Industries 116220 D 107243-0002 unit is exhibiting unexpected behavior. It is not functioning as it typically does.

—> Purchase or Repair:
#Advance Industries by Luley on 2009-05-17 18:18
Drive or board failure on Advance Industries 116220 D 107243-0002. Need immediate attention to prevent downtime.

—> Purchase or Repair:
#Advance Industries by Beniamin on 2009-12-16 23:16
Board on Advance Industries 116220 D 107243-0002 just went down. Need replacement ASAP to restore operation.

—> Purchase or Repair:
#Advance Industries by Sabin on 2009-11-23 23:58
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse. Please provide a description of the abnormal actions you are observing.

—> Purchase or Repair:
#Advance Industries by Scheele on 2014-11-18 00:25
We experienced downtime with Advance Industries 116220 D 107243-0002 due to a faulty circuit board at 1030 pm last night. Need a quick resolution before the next shift starts.

—> Purchase or Repair:
#Advance Industries by ODonovan on 2009-11-09 14:40
Hi there, I am reaching out on behalf of our client regarding part number 116220 D 107243-0002, which involves a board issue. Can you please provide more information on the repair process and estimated cost? Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.