Advance Industries Service & Repair Forum

I'm currently experiencing an issue with the Advance Industries 116220 D 107243-0002 machine. It appears that the board may not be functioning properly as something has stopped working. I will need assistance to diagnose and resolve this issue as soon as possible.

—> Purchase or Repair: Ticket Image

— Posted by art on 2009-03-10

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by sumesh on 2009-07-19 20:15
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. I was told to get this fixed or replaced, but I'm not sure what it does. Can this board be repaired or purchased as a replacement? I'm looking to check this off my to-do list. Thank you.

—> Purchase or Repair:
#Advance Industries by Steven Lorke on 2014-06-27 21:50
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by James Rowling on 2014-02-16 22:58
The Advance Industries 116220 D 107243-0002 circuit board unit is malfunctioning and needs attention from the maintenance team.

—> Purchase or Repair:
#Advance Industries by troy gowan on 2010-09-16 21:08
I have a overhead garage doors opener. model 100. I am looking for a replacment remot and reciverreciver number is 107224-0014

—> Purchase or Repair:
#Advance Industries by david ambler on 2010-09-08 12:31
Remote shows FCC# only the garage door opener is overhead door 450A I would like to find another spare remote.It is medium brown in color with a brown button and an ivory color button .The remote operates 2 doors and has 2 code selection modules one for each door.

—> Purchase or Repair:
#Advance Industries by Marques Cedric on 2014-12-16 22:44
Equipment ID Advance Industries 116220 D 107243-0002Issue Machine not powering up, displaying Error Code 302. Investigation needed ASAP. Please advise on next steps.

—> Purchase or Repair:
#Advance Industries by michael on 2009-05-08 12:48
I HAVE A KEW 16 40 HA, AND IM HAVING PROBLEMS TRYING TO FIX IT!IT WONT RUN AT ALL,THOUGHT IT MIGHT BE THE COIL , CHECKED THE WIERING! AND STILL NOTHING? HELPMANY THANKS MICHAEL

—> Purchase or Repair:
#Advance Industries by collavet on 2015-07-11 01:32
Gate control board on Advance Industries 116220 D 107243-0002 just failed. Heading to assess and replace it ASAP to minimize downtime.

—> Purchase or Repair:
#Advance Industries by tricarick on 2015-01-06 13:41
Gate control board on Industries 116220 D 107243-0002 just failed. Will troubleshoot and replace ASAP.

—> Purchase or Repair:
#Advance Industries by Dan Potts on 2009-12-31 06:31
Hi there. We're in urgent need of repair information for an Advance Industries 116220 D 107243-0002 board. Urgently seeking guidance on replacement or repair. Appreciate a quick response. Thank you!

—> Purchase or Repair:
#Advance Industries by Nathan Franco on 2009-08-20 21:45
Hi, we are inquiring about part number 116220 D 107243-0002 for Advance Industries. The component is described as a board. Could you provide details on its repair availability and estimated turnaround time? Thank you.

—> Purchase or Repair:
#Advance Industries by DENISENKO on 2009-12-12 14:44
The Advance Industries 116220 D 107243-0002 is showing error code E043. Equipment is not powering up. Please advise on next steps for troubleshooting and repair.

—> Purchase or Repair:
#Advance Industries by Donald Marcotte on 2013-01-21 16:15
I am looking for a circuit board Advanced Industries model No. 116220 D P/N 107243-0002 LOGIC TIMER

—> Purchase or Repair:
#Advance Industries by Howard O Line on 2009-05-15 13:24
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by Lind on 2014-05-03 05:20
Advance Industries 116220 D 107243-0002 experiencing extensive circuit board failures disrupting production line. Urgent repair service needed to restore operations ASAP.

—> Purchase or Repair:
I noticed that the Advance Industries 116220 D 107243-0002 is experiencing an issue with the board. It seems like something has stopped working, but I'm not entirely sure what the specific problem is. I'll try to gather more information to provide a clearer picture of the situation.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by nardini on 2009-10-05 07:41
The Advance Industries 116220 D 107243-0002 board malfunctioned earlier today, causing significant downtime in the production. This occurred at 1030 AM, disrupting our operations. I need a quick resolution or workaround before the next shift starts. Thank you.

—> Purchase or Repair:
#Advance Industries by DeeAnne on 2005-08-30 23:03
Hi,I am in desparate need of a wiring diagram for an Advance industries 116220D board for a Mckinney Electronics operator. We need to add a reflective detector and the board we have does not have a labelled terminal block. We would appreciate any information you might have.Thanks,DeeAnne—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Steve DeLurgio on 2009-03-11 22:11
Hello, can the Advance Industries 116220 D 107243-0002 board be repaired or purchased? I'm trying to resolve this as part of my to-do list. Thank you.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board is malfunctioning, halting the production line. Urgent repair needed to resume operations

—> Purchase or Repair:
#Advance Industries by Cherrington on 2015-08-10 00:20
Hello, our Advance Industries 116220 D 107243-0002 Gate Control Board is displaying error code E05 and the gate is not responding to any commands. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by ODonovan on 2009-11-09 14:40
Hi there, I am reaching out on behalf of our client regarding part number 116220 D 107243-0002, which involves a board issue. Can you please provide more information on the repair process and estimated cost? Thank you.

—> Purchase or Repair:
#Advance Industries by chris corey on 2016-02-17 20:03
im looking to replace a bsh8yn229 remote

—> Purchase or Repair:
#Advance Industries by JORGE TALERO on 2009-05-25 01:00
Hello, I'm reaching out regarding the Advance Industries 116220 D 107243-0002 board. I was instructed to either repair or replace it, but I'm uncertain of its function. Could you please advise if this item can be repaired or if a new one needs to be purchased? I'm aiming to

—> Purchase or Repair:
#Advance Industries by Helvie on 2009-12-04 02:00
Please advise if the Advance Industries 116220 D 107243-0002 board is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by Leach on 2014-04-03 17:29
The circuit board in Advance Industries 116220 D 107243-0002 just went out, causing a machine shutdown. Need immediate replacement to keep the line running.

—> Purchase or Repair:
#Advance Industries by Jen Massey on 2014-05-02 10:20
Could you please confirm if the Advance Industries 116220 D 107243-0002 circuit board is still supported or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Advance Industries by Brian Chiddick on 2009-09-01 17:31
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by Strube on 2009-12-24 12:33
Do you have a board available for Advance Industries 116220 D 107243-0002? Our unit is down, and we need to keep production running.

—> Purchase or Repair:
#Advance Industries by HESAM on 2009-08-13 05:45
Hello, I need someone to repair my Advance Industries 116220 D 107243-0002 board. It's malfunctioning and affecting our production. Your urgent attention is greatly appreciated.

—> Purchase or Repair:
#Advance Industries by J.Y. on 2009-10-14 20:43
The Advance Industries 116220 D 107243-0002 unit is still down. Please provide an update as soon as possible.

—> Purchase or Repair:
#Advance Industries by Lee Hodson on 2015-03-31 07:04
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working.

—> Purchase or Repair:
#Advance Industries by Thanh on 2009-09-10 02:15
Hi there, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you confirm the pricing and availability for this model? My team recommended reaching out as we are looking to source one quickly. Thank you!

—> Purchase or Repair:
#Advance Industries by Lynn Waterhouse on 2005-12-30 03:51
The logic timer board (Advance Industries 116220D 107243-0002) is malfunctioning, causing a halt in production on the line. Urgent action is required to resolve this issue

—> Purchase or Repair:
#Advance Industries by ken castro on 2009-03-11 10:11
I'm sorry, but something seems to be off with the board on the Advance Industries 116220 D 107243-0002 machine. It appears to have stopped functioning correctly.

—> Purchase or Repair:
#Advance Industries by manny on 2005-12-21 00:47
Logic timer board in Advance Industries 116220D 107243-0002 is malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by Rodrigo Avendano on 2009-08-17 16:02
Can you please provide information on repairs for Advance Industries 116220 D 107243-0002 board? The client is experiencing issues and needs guidance.

—> Purchase or Repair:
#Advance Industries by sutrisno on 2015-07-24 14:43
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working properly.

—> Purchase or Repair:
#Advance Industries by Chu on 2009-02-23 05:06
Hello, I represent a client who is experiencing some issues with an Advance Industries 116220 D 107243-0002 board. Could you please provide some information on potential repair options and costs for this specific part?Thank you.

—> Purchase or Repair:
#Advance Industries by Babur on 2009-11-19 16:31
Machine not powering up.

—> Purchase or Repair:
#Advance Industries by Dumangas on 2009-03-18 01:00
I'm facing a problem with the Advance Industries 116220 D 107243-0002 board. It seems that something has stopped working, but I'm not exactly sure what the issue is. I will need to investigate further to determine the cause of the malfunction.

—> Purchase or Repair:
#Advance Industries by Tibbetts on 2009-03-17 00:45
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this critical issue and get the production line back up and running.

—> Purchase or Repair:
#Advance Industries by Bonnie Pierson on 2009-08-19 20:31
The Advance Industries 116220 D 107243-0002 board is not functioning and needs attention from the maintenance team.

—> Purchase or Repair:
#Advance Industries by Royce D. Cooper on 2009-05-19 04:12
We are still waiting for a response regarding the Advance Industries 116220 D 107243-0002 board. Please provide an update as soon as possible as the unit is still down. Thank you.

—> Purchase or Repair:
#Advance Industries by Rodriguez. on 2009-09-10 03:15
Do you have another Advance Industries 116220 D 107243-0002 board available for sale to keep production running? Thank you.

—> Purchase or Repair:
#Advance Industries by Afonso Lemos on 2015-07-24 10:20
I suggest sending this message to the manufacturer "Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 Gate Control Board. Our team is looking for information on whether this unit is still supported or if replacement parts are available. Could you please provide some guidance on…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by tukaram on 2009-08-31 10:26
Hello, I am in need of repair info for an Advance Industries 116220 D 107243-0002 board. Can you please provide details on how to get this fixed? Thank you.
—> See more:

—> Purchase or Repair:
#Advance Industries by Gustavo Gil on 2009-07-29 01:00
The Advance Industries 116220 D 107243-0002 board is showing error code E102. Equipment is not powering up despite multiple restart attempts. Please advise.

—> Purchase or Repair:
#Advance Industries by orru on 2009-07-18 12:38
Board on Advance Industries 116220 D 107243-0002 malfunctioning. Urgent repair needed to resume production. Line stoppage impacting output. Address immediately to avoid further delays.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.