Advance Industries Service & Repair Forum

I work for Overhead Door Company of Las Cruces and we have the logic timer board in stock, but nobody hear seems to know what it goes into. We assume it\'s for a gate operator but we don\'t lnow which model> I believe it maybe for several different models.Can you help?Thanks

—> Purchase or Repair: Ticket Image

— Posted by Russell Diaz on 2009-05-06

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Genoa on 2015-07-25 09:20
Hello, I'm inquiring about part number 116220 D 107243-0002, which is a Gate Control Board for Advance Industries. My client is experiencing some issues with this particular part and would like to get more information on repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Lebedev on 2014-12-18 09:44
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Steven Lorke on 2014-06-27 21:50
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Magaly Polo A. on 2009-11-16 16:58
The Advance Industries 116220 D 107243-0002 board is behaving unusually. It is not functioning as it normally does, exhibiting strange behavior.

—> Purchase or Repair:
#Advance Industries by Weir on 2009-09-02 19:21
Please prioritize addressing the malfunction on the Advance Industries 116220 D 107243-0002 board as it's significantly impacting our production line. Your urgent attention to this matter is required to resume operations

—> Purchase or Repair:
#Advance Industries by Jeremiah Albright on 2009-09-03 07:12
Hello, the Advance Industries 116220 D 107243-0002 is currently down. The display is showing Error Code 4 and there is a constant alarm going off. Please advise on potential causes and next steps for repair. Thank you.

—> Purchase or Repair:
Hello, I'm reaching out to inquire about the Advance Industries 116220 D 107243-0002 board. We are looking to determine if this unit is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by Babur on 2009-11-19 16:31
Machine not powering up.

—> Purchase or Repair:
#Advance Industries by Juan Martinez on 2009-12-29 09:17
Do you have an Advance Industries 116220 D 107243-0002 board available for repair or sale? Production is currently down and we need to keep it running. Thank you.

—> Purchase or Repair:
#Advance Industries by Ray Knichel on 2009-08-01 17:02
Machine is not responding to power button; displaying error code E3.

—> Purchase or Repair:
#Advance Industries by JERE L. WILSON on 2009-05-31 09:37
Please provide an update on the status of the Advance Industries 116220 D 107243-0002 board. The unit is still not functioning, and we need assistance urgently. Your

—> Purchase or Repair:
#Advance Industries by PROM on 2009-11-25 02:52
Hi, I am checking off my to-do list and wanted to ask if the Advance Industries 116220 D 107243-0002 board can be repaired or if a new one needs to be purchased? Thank you!

—> Purchase or Repair:
#Advance Industries by martin zarate on 2005-12-30 01:51
The logic timer board on our Advance Industries 116220D 107243-0002 is malfunctioning, causing an interruption in the production line. We need immediate repair service to rectify the issue and resume operations swiftly.

—> Purchase or Repair:
#Advance Industries by Bonnie Pierson on 2009-08-19 20:31
The Advance Industries 116220 D 107243-0002 board is not functioning and needs attention from the maintenance team.

—> Purchase or Repair:
#Advance Industries by Scheele on 2014-11-18 00:25
We experienced downtime with Advance Industries 116220 D 107243-0002 due to a faulty circuit board at 1030 pm last night. Need a quick resolution before the next shift starts.

—> Purchase or Repair:
#Advance Industries by ODonovan on 2009-11-09 14:40
Hi there, I am reaching out on behalf of our client regarding part number 116220 D 107243-0002, which involves a board issue. Can you please provide more information on the repair process and estimated cost? Thank you.

—> Purchase or Repair:
#Advance Industries by Adlen on 2009-03-21 19:21
We are experiencing a critical failure in the circuit board of the Advance Industries 116220 D 107243-0002 equipment. Production has come to a halt and we require immediate repair service to get the line running again. Please prioritize this issue.

—> Purchase or Repair:
#Advance Industries by Ann Ratay on 2016-02-10 02:03
We have 2 overhead garage doors........... but no remotes. They are both Model 55A Garage Door Opener System by The Overhead Door Co. They were installed about 1985. Wondering if there are replacement remotes we can purchase anywhere.Would appreciate any information or help you could provide concern…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Joseph Snow on 2011-01-21 14:15
Need a manual for a 24 volt AC power door opener, in order to hook it up

—> Purchase or Repair:
#Advance Industries by salah on 2009-03-12 02:11
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? The unit went down, and we need to keep production running.

—> Purchase or Repair:
I'm working with Advance Industries 116220 D 107243-0002, and the board seems to be the issue. The equipment is down, and I'm not sure why. No error code is displaying. Please advise on next steps to troubleshoot.

—> Purchase or Repair:
#Advance Industries by mangesh shanbhag on 2009-10-20 19:32
The Advance Industries 116220 D 107243-0002 board is not working as reported.

—> Purchase or Repair:
#Advance Industries by sazib on 2009-10-19 13:22
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? Our unit is down and we need to keep production running.

—> Purchase or Repair:
#Advance Industries by Nikita on 2009-06-27 12:07
Hello, we have an issue with the Advance Industries 116220 D 107243-0002 board. Could you please provide repair information or a replacement as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by walter zambrana on 2012-04-22 18:37
I would like to replace the 2 remotes controls that I have. the following information is: FCC ID: BSH8YN106546. FREQ. 360- MFG91 168.Your response by E-mail will be really appreciate.

—> Purchase or Repair:
#Advance Industries by Palmer Rodgers on 2009-06-12 20:28
Hey there, can you provide repair info for Advance Industries 116220 D 107243-0002 circuit board? It stopped working and we need a replacement or repair solution urgently. Thank you for your

—> Purchase or Repair:
#Advance Industries by john.gilmore on 2011-10-31 13:04
I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

—> Purchase or Repair:
#Advance Industries by Guibord on 2015-08-07 12:20
The Advance Industries 116220 D 107243-0002 gate control board is not functioning correctly.

—> Purchase or Repair:
#Advance Industries by ENGLISH on 2009-03-11 18:11
The Advance Industries 116220 D 107243-0002 board is not functioning properly. Please address the issue

—> Purchase or Repair:
#Advance Industries by ken castro on 2009-03-11 10:11
I'm sorry, but something seems to be off with the board on the Advance Industries 116220 D 107243-0002 machine. It appears to have stopped functioning correctly.

—> Purchase or Repair:
#Advance Industries by said benhamad on 2009-11-16 22:17
Hello, we have a faulty board (Advance Industries 116220 D 107243-0002) that needs to be repaired or replaced. Can you please provide us with repair information as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by julius on 2009-12-05 17:34
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. Urgent action needed for repair to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by atilla on 2009-06-23 01:10
Hello, I am interested in purchasing the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are in urgent need of sourcing one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Luley on 2009-05-17 18:18
Drive or board failure on Advance Industries 116220 D 107243-0002. Need immediate attention to prevent downtime.

—> Purchase or Repair:
I noticed that the Advance Industries 116220 D 107243-0002 is experiencing an issue with the board. It seems like something has stopped working, but I'm not entirely sure what the specific problem is. I'll try to gather more information to provide a clearer picture of the situation.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Steve Tryon on 2015-07-20 09:20
Hi, our Advance Industries 116220 D 107243-0002 gate control board is displaying error code E7 and the gate is not responding to commands. We need urgent assistance to get this equipment back up and running.

—> Purchase or Repair:
#Advance Industries by Jarod Ballardo on 2009-05-29 07:06
The Advance Industries 116220 D 107243-0002 board is not working as per the shop.

—> Purchase or Repair:
Dear Sir/Madam,I am looking for a part that you have in store. That is part model no. 116220 D. I would like to know how much this part will cost me.I am looking forward for a reply.yours sincerly, Nando Semeleer.

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Cabrera on 2009-11-15 14:18
Could you please confirm if the Advance Industries 116220 D 107243-0002 board is still supported by the manufacturer or if replacement parts are available for repair? Thank you.

—> Purchase or Repair:
#Advance Industries by Leonce Collins on 2007-01-13 16:23
Need logic board 116220DModel 107243-0002Do you have that availableLeonce Collins504-722-4729

—> Purchase or Repair:
#Advance Industries by Nabil Ghanem on 2009-11-18 09:51
The Advance Industries 116220 D 107243-0002 board is malfunctioning, causing a complete halt in the production line. Urgent repair service is required to address the issue

—> Purchase or Repair:
#Advance Industries by Lee gregory on 2009-07-23 18:55
Hello, we are in need of repair information for an Advance Industries 116220 D 107243-0002 board. Can you please provide details on how to fix or replace it? Thank you.

—> Purchase or Repair:
#Advance Industries by Davette on 2014-05-06 16:20
The Advance Industries 116220 D 107243-0002 unit is not working.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board is not working. That's all we know from the shop.

—> Purchase or Repair:
#Advance Industries by Rajneesh on 2009-01-24 03:59
The Advance Industries 116220 D 107243-0002 board is showing error code E23 and is not responding to any commands. Need urgent assistance to troubleshoot and fix the issue. Thank you.

—> Purchase or Repair:
#Advance Industries by Brian Chiddick on 2009-09-01 17:31
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by leila on 2009-10-26 13:23
Hello, we have an Advance Industries 116220 D 107243-0002 board that requires repair. Could you please provide us with the repair information as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by Curran on 2009-09-14 12:12
Looking for repair for an Advance Industries 116220 D 107243-0002 board. Unit not functioning, need a technician ASAP.

—> Purchase or Repair:
#Advance Industries by Conrad on 2015-05-15 21:48
Remote control: Crusader Solid State Model 200SS/202SS

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.