Advance Industries Service & Repair Forum

Hello, my Advance Industries 116220 D 107243-0002 board is malfunctioning and in need of repairs. Looking for a technician to help resolve the issue quickly.

—> Purchase or Repair: Ticket Image

— Posted by Ziganay on 2009-07-08

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by bekZitteeGeom on 2006-04-11 19:35
The control board on the Advance Industries 116220-D 107243-0002 is malfunctioning, causing a significant disruption to the production line. Immediate repair or replacement is necessary to resume operations without further delay.

—> Purchase or Repair:
#Advance Industries by Corey love on 2009-03-11 04:11
Could you please provide me with pricing and availability details for the Advance Industries 116220 D 107243-0002 board? I am looking to source one quickly and would appreciate your

—> Purchase or Repair:
#Advance Industries by nagarajan.g on 2009-03-09 12:11
Board on Advance Industries 116220 D 107243-0002 malfunctioned, needs immediate attention. Will investigate further and report back soon.

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Ray Knichel on 2009-08-01 17:02
Machine is not responding to power button; displaying error code E3.

—> Purchase or Repair:
#Advance Industries by Ron on 2009-08-21 11:38
Hello, I'm reaching out to inquire about repair information for an Advance Industries 116220 D 107243-0002 board that has stopped working. Could you provide details on how we can repair or replace it quickly? Thank you.

—> Purchase or Repair:
#Advance Industries by berrier on 2009-09-25 02:48
I'm sorry to inform you that something seems to have stopped working with your Advance Industries 116220 D 107243-0002. We're not entirely sure what the issue is, but we are looking into it to get it resolved as soon as possible. Thank you for your patience and understanding.

—> Purchase or Repair:
#Advance Industries by Helvie on 2009-12-04 02:00
Please advise if the Advance Industries 116220 D 107243-0002 board is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-22 13:20
I forgot to mention the model of the door opener is R80-az It is 115volts and 60amps 1/3 hp. There is a separate antenna mod 702 ser#751015 code 390-19 Thank you

—> Purchase or Repair:
#Advance Industries by Ostermann on 2009-06-24 14:44
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by Pertijs on 2009-11-24 18:15
We experienced unexpected downtime with the Advance Industries 116220 D 107243-0002 board last night at 1000 pm. Please investigate and provide feedback urgently.

—> Purchase or Repair:
#Advance Industries by Ann Ratay on 2016-02-10 02:03
We have 2 overhead garage doors........... but no remotes. They are both Model 55A Garage Door Opener System by The Overhead Door Co. They were installed about 1985. Wondering if there are replacement remotes we can purchase anywhere.Would appreciate any information or help you could provide concern…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Fredrick Goll on 2009-07-13 21:44
I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Burhanettin SEN on 2009-12-18 19:06
The board for the Advance Industries 116220 D 107243-0002 unit is exhibiting unexpected behavior. It is not functioning as it typically does.

—> Purchase or Repair:
#Advance Industries by tukaram on 2009-08-31 10:26
Hello, I am in need of repair info for an Advance Industries 116220 D 107243-0002 board. Can you please provide details on how to get this fixed? Thank you.
—> See more:

—> Purchase or Repair:
#Advance Industries by leila on 2009-10-26 13:23
Hello, we have an Advance Industries 116220 D 107243-0002 board that requires repair. Could you please provide us with the repair information as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by Gary Abbott on 2009-05-13 18:54
The Advance Industries 116220 D 107243-0002 board unit is currently not functioning. Maintenance team is troubleshooting the issue.

—> Purchase or Repair:
#Advance Industries by Michelle Hurley on 2014-01-07 19:22
We experienced downtime with the Advance Industries 116220 D 107243-0002 circuit board earlier today around 230 PM. Can you provide some insight into what might have caused the issue? It's crucial information we need before the next shift begins. Thank you!

—> Purchase or Repair:
#Advance Industries by Udoh on 2009-12-18 22:06
Hello, I am interested in the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Annadurdiev on 2009-10-11 14:22
The Advance Industries 116220 D 107243-0002 unit is currently down. Maintenance team has been notified.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board is malfunctioning, halting the production line. Urgent repair needed to resume operations

—> Purchase or Repair:
#Advance Industries by Stromberg on 2009-11-19 11:02
The Advance Industries 116220 D 107243-0002 is currently down showing error code E306. Please advise on next steps for troubleshooting and repair. Thank you.

—> Purchase or Repair:
#Advance Industries by furqan on 2009-12-07 14:18
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in our warehouse. It is not performing its usual functions.

—> Purchase or Repair:
#Advance Industries by ODonovan on 2009-11-09 14:40
Hi there, I am reaching out on behalf of our client regarding part number 116220 D 107243-0002, which involves a board issue. Can you please provide more information on the repair process and estimated cost? Thank you.

—> Purchase or Repair:
I noticed that the Advance Industries 116220 D 107243-0002 is experiencing an issue with the board. It seems like something has stopped working, but I'm not entirely sure what the specific problem is. I'll try to gather more information to provide a clearer picture of the situation.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Juergen.Arpe on 2009-12-29 13:17
I've noticed an issue with the Advance Industries 116220 D 107243-0002. It seems like something on the board has stopped working, but I'm not entirely sure what it does. I will report it to the appropriate department for further investigation.

—> Purchase or Repair:
#Advance Industries by Mike Johnson on 2009-08-04 11:48
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line stoppage. Please address this issue urgently to resume operations.

—> Purchase or Repair:
#Advance Industries by HESAM on 2009-08-13 05:45
Hello, I need someone to repair my Advance Industries 116220 D 107243-0002 board. It's malfunctioning and affecting our production. Your urgent attention is greatly appreciated.

—> Purchase or Repair:
#Advance Industries by walter zambrana on 2012-04-22 18:37
I would like to replace the 2 remotes controls that I have. the following information is: FCC ID: BSH8YN106546. FREQ. 360- MFG91 168.Your response by E-mail will be really appreciate.

—> Purchase or Repair:
#Advance Industries by nardini on 2009-10-05 07:41
The Advance Industries 116220 D 107243-0002 board malfunctioned earlier today, causing significant downtime in the production. This occurred at 1030 AM, disrupting our operations. I need a quick resolution or workaround before the next shift starts. Thank you.

—> Purchase or Repair:
#Advance Industries by Cherrington on 2015-08-10 00:20
Hello, our Advance Industries 116220 D 107243-0002 Gate Control Board is displaying error code E05 and the gate is not responding to any commands. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Ricardo Rivas on 2009-07-29 13:53
The Advance Industries 116220 D 107243-0002 board is showing Error Code 3B. Equipment not powering on properly. Need urgent repair.

—> Purchase or Repair:
#Advance Industries by Reichling on 2009-12-03 08:09
The Advance Industries 116220 D 107243-0002 is malfunctioning. It is a board unit, but I'm not entirely sure about its function.

—> Purchase or Repair:
do you have the light board that plugs into the 116220d timer board

—> Purchase or Repair:
#Advance Industries by atilla on 2009-06-23 01:10
Hello, I am interested in purchasing the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are in urgent need of sourcing one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Cabrera on 2009-11-15 14:18
Could you please confirm if the Advance Industries 116220 D 107243-0002 board is still supported by the manufacturer or if replacement parts are available for repair? Thank you.

—> Purchase or Repair:
#Advance Industries by Rudy Martens on 2009-12-17 22:53
Machine displaying error code X32 upon startup.

—> Purchase or Repair:
#Advance Industries by Howard O Line on 2009-05-15 13:24
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by Sandra Contreras on 2009-12-11 02:24
Hello, I hope you're doing well. I was asked to get the Advance Industries 116220 D 107243-0002 board fixed or replaced. Before making a decision, may I know if it's possible to repair this board or if it needs to be purchased new? I'm trying to get this resolved as soon as possible. Thank you for y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Gordon Truex on 2014-03-28 13:52
Can you tell me if it is possible to get a replacement remote for a Touch n Go remote I purchaced in 1985. It is coded 390-19. there is an antenna model 702, ser#751015 if that helps. also the door opener is a model R80-az. Thank you

—> Purchase or Repair:
#Advance Industries by Thanh on 2009-09-10 02:15
Hi there, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you confirm the pricing and availability for this model? My team recommended reaching out as we are looking to source one quickly. Thank you!

—> Purchase or Repair:
#Advance Industries by Olga on 2009-12-04 01:00
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? We need it urgently to keep production running.

—> Purchase or Repair:
#Advance Industries by Jen Massey on 2014-05-02 10:20
Could you please confirm if the Advance Industries 116220 D 107243-0002 circuit board is still supported or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Advance Industries by James Rowling on 2014-02-16 22:58
The Advance Industries 116220 D 107243-0002 circuit board unit is malfunctioning and needs attention from the maintenance team.

—> Purchase or Repair:
#Advance Industries by Scheele on 2014-11-18 00:25
We experienced downtime with Advance Industries 116220 D 107243-0002 due to a faulty circuit board at 1030 pm last night. Need a quick resolution before the next shift starts.

—> Purchase or Repair:
#Advance Industries by Fred H Black on 2009-08-31 13:26
Drive or board (116220 D 107243-0002) failed in machine. Heading to assess issue now.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-04-02 13:14
I am looking for another or a replacement for the Touch n go (390-19mhz) remote that I now have. As far as I can tell it was from 1985 and is analog. It is for my \"Overhead Door\" garage door opener from the early 1970\'s. I would love to get another one for my wifes car. Thank you—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Jerry Fields on 2011-05-12 15:21
I need to purchase 2 ea. Advance Industries Garage Door OpenersFCC ID: BSH8YN213

—> Purchase or Repair:
#Advance Industries by NOE VALADEZ on 2009-09-24 02:07
Could you please provide details on repair services and estimated costs for Advance Industries 116220 D 107243-0002 board in need of service? Thank you.

—> Purchase or Repair:
#Advance Industries by Jacky on 2009-03-29 04:00
I would like to inquire if you have an Advance Industries 116220 D 107243-0002 board available for purchase or repair. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.