Advance Industries Service & Repair Forum

I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I you are the company that can help the garage door opener is Mod R 802, NEC Class 2 Circuit, 25 Volt Max, 6 amp, 1/4 HP. Freq is 380-BBB, FCC ID BSH8YN-206, MFG 90226.A response by email would be helpful.Thanks

—> Purchase or Repair: Ticket Image

— Posted by Fredrick Goll on 2009-07-13

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Stalzer on 2009-07-27 04:35
The Advance Industries 116220 D 107243-0002 board unit is not working properly. Maintenance team needs to check and repair it.

—> Purchase or Repair:
#Advance Industries by ismael on 2014-02-19 07:19
The Advance Industries 116220 D 107243-0002 circuit board malfunctioned causing unexpected downtime earlier today around 1130 am. Need to resolve this issue before the next shift starts. Any insights or suggestions would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by Gaudette on 2009-07-13 09:11
I'm experiencing a problem with the Advance Industries 116220 D 107243-0002 - it seems like the board is malfunctioning. I'm not entirely sure what this model does, but something has definitely stopped working.

—> Purchase or Repair:
#Advance Industries by Bonnie Pierson on 2009-08-19 20:31
The Advance Industries 116220 D 107243-0002 board is not functioning and needs attention from the maintenance team.

—> Purchase or Repair:
#Advance Industries by Sylvia laoutas on 2009-03-10 23:11
The unit Advance Industries 116220 D 107243-0002 is exhibiting abnormal behavior in the warehouse. It is not functioning as usual, acting strangely.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board just failed on machine 5. Need to replace ASAP to avoid downtime.

—> Purchase or Repair:
#Advance Industries by bahat on 2009-11-15 01:37
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. Could you please let me know if it can be repaired or if a replacement can be purchased? I am trying to

—> Purchase or Repair:
#Advance Industries by Rajneesh on 2009-01-24 03:59
The Advance Industries 116220 D 107243-0002 board is showing error code E23 and is not responding to any commands. Need urgent assistance to troubleshoot and fix the issue. Thank you.

—> Purchase or Repair:
#Advance Industries by Malcolm on 2009-05-26 15:51
Hello, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. I'd like to inquire about pricing and availability as I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Josef on 2009-11-12 04:34
Hello, do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit is down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by Stephen Thompson on 2009-11-06 21:59
Machine producing blank boards, unable to cut components.

—> Purchase or Repair:
#Advance Industries by Ronaldabamy on 2009-10-25 16:46
Machine displaying error code "E02 - Main Board Failure."

—> Purchase or Repair:
#Advance Industries by bharat patel on 2009-05-25 12:22
Hello, Could you please provide repair information for a malfunctioning Advance Industries 116220 D 107243-0002 board? Any help would be greatly appreciated. Thank you.

—> Purchase or Repair:
#Advance Industries by john.gilmore on 2011-10-31 13:04
I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

—> Purchase or Repair:
#Advance Industries by Fredrick Goll on 2009-07-13 21:44
I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Gordon Truex on 2014-03-22 13:15
I have a touch n\'go remote garage door opener (390-19 mhz) for my overhead door garage opener and it works fine. I would love to get another one. I believe this has a date of 1985 on it and don\'t know if these are still possible to get. Any help? Thank yo

—> Purchase or Repair:
#Advance Industries by keenan on 2014-04-14 18:32
The Advance Industries 116220 D 107243-0002 circuit board malfunctioned during the night shift. Please investigate and restore functionality.

—> Purchase or Repair:
#Advance Industries by Stanleycib on 2015-10-28 11:28
Hey, the Gate Control Board (116220 D 107243-0002) just failed. Need to replace it ASAP to get the machine back online.

—> Purchase or Repair:
#Advance Industries by NIKHIL DOSHI on 2009-10-18 18:47
Hi there, I hope this message finds you well. We have an Advance Industries 116220 D 107243-0002 board that we're looking to find a replacement or repair option for. This unit is older, and we're unsure if it's still supported or if parts are still available for it. Could you please let us know if s…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Cabrera on 2009-11-15 14:18
Could you please confirm if the Advance Industries 116220 D 107243-0002 board is still supported by the manufacturer or if replacement parts are available for repair? Thank you.

—> Purchase or Repair:
#Advance Industries by WILLIAMSON on 2009-01-26 16:35
The board for the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need urgent repair service to resolve the issue and get the production line running smoothly again.

—> Purchase or Repair:
#Advance Industries by Jarod Ballardo on 2009-05-29 07:06
The Advance Industries 116220 D 107243-0002 board is not working as per the shop.

—> Purchase or Repair:
#Advance Industries by Reichling on 2009-12-03 08:09
The Advance Industries 116220 D 107243-0002 is malfunctioning. It is a board unit, but I'm not entirely sure about its function.

—> Purchase or Repair:
#Advance Industries by Joe ODonovan on 2009-01-04 10:39
Hi, the Advance Industries 116220 D 107243-0002 is displaying Error Code 12 and the power indicator light is blinking red. The equipment is not responding to any commands. Please advise on troubleshooting steps or repairs needed. Thank you.

—> Purchase or Repair:
#Advance Industries by lora linville on 2009-05-18 17:43
Hello, I am reaching out on behalf of a client who is in need of assistance with an Advance Industries 116220 D 107243-0002 board. They have indicated that there seems to be an issue with the board. Can you please provide information on potential repair options and cost estimates? Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by PROM on 2009-11-25 02:52
Hi, I am checking off my to-do list and wanted to ask if the Advance Industries 116220 D 107243-0002 board can be repaired or if a new one needs to be purchased? Thank you!

—> Purchase or Repair:
#Advance Industries by Hubie Colquitt on 2009-06-14 18:56
Could you please provide repair information for the Advance Industries 116220 D 107243-0002 board? Our team on-site urgently needs to replace it. Thank you.

—> Purchase or Repair:
#Advance Industries by Hasan Ahmed Syed on 2006-10-26 23:27
The control board (116220-D 107243-0002) on the production line is malfunctioning, causing disruptions and delays. Immediate repair service is needed to restore full production capacity.

—> Purchase or Repair:
#Advance Industries by Carolyn McCrary on 2009-12-14 06:48
"Unit 116220 D 107243-0002 board failure during night shift. Needs attention ASAP. - Maintenance Crew"

—> Purchase or Repair:
#Advance Industries by troy gowan on 2010-09-16 21:08
I have a overhead garage doors opener. model 100. I am looking for a replacment remot and reciverreciver number is 107224-0014

—> Purchase or Repair:
#Advance Industries by mark casey on 2012-06-07 20:32
I have manual for this oard if you still need it

—> Purchase or Repair:
#Advance Industries by Tchatchui on 2006-06-22 14:29
Advance Industries 116220-D 107243-0002 control board malfunctioning, affecting production line speed and accuracy. Immediate repair required to resume operations.

—> Purchase or Repair:
#Advance Industries by Robberechts Senne on 2009-11-11 23:30
The Advance Industries 116220 D 107243-0002 board malfunctioned mid-shift. Need follow-up during the day.

—> Purchase or Repair:
#Advance Industries by sazib on 2009-10-19 13:22
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? Our unit is down and we need to keep production running.

—> Purchase or Repair:
#Advance Industries by Monroe Dodd on 2009-03-17 19:53
Hey, a unit went down mid-shift. Issue with Advance Industries 116220 D 107243-0002 board. Need to check and fix it ASAP.

—> Purchase or Repair:
#Advance Industries by Lind on 2014-05-03 05:20
Advance Industries 116220 D 107243-0002 experiencing extensive circuit board failures disrupting production line. Urgent repair service needed to restore operations ASAP.

—> Purchase or Repair:
#Advance Industries by Lynn Waterhouse on 2005-12-30 03:51
The logic timer board (Advance Industries 116220D 107243-0002) is malfunctioning, causing a halt in production on the line. Urgent action is required to resolve this issue

—> Purchase or Repair:
#Advance Industries by Leach on 2014-04-03 17:29
The circuit board in Advance Industries 116220 D 107243-0002 just went out, causing a machine shutdown. Need immediate replacement to keep the line running.

—> Purchase or Repair:
#Advance Industries by Dumangas on 2009-03-18 01:00
I'm facing a problem with the Advance Industries 116220 D 107243-0002 board. It seems that something has stopped working, but I'm not exactly sure what the issue is. I will need to investigate further to determine the cause of the malfunction.

—> Purchase or Repair:
#Advance Industries by Clarence Wilson on 2009-01-31 00:29
The Advance Industries 116220 D 107243-0002 board is malfunctioning. Maintenance team needs assistance to address the issue.

—> Purchase or Repair:
#Advance Industries by Igor Tustanowski on 2009-01-18 04:58
Do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by wildbill on 2017-07-26 18:11
The logic timer board was used in the Crusader C-300 and C-350 slide gate operators by McKinney Electronics/Overhead Door. I would be interested in purchasing this board if it is still available and known to be functional. Mine has the same issue as described in the iernc post by David Prevo in Oct.…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by khulaif abdullah on 2009-08-30 23:06
The Advance Industries 116220 D 107243-0002 board is not working. — See more:

—> Purchase or Repair:
#Advance Industries by Mr.Simon on 2015-07-30 16:20
Can the Advance Industries 116220 D 107243-0002 Gate Control Board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by Larry Freeze on 2011-06-13 20:56
Would like information on the purchase of two remote units. The main door remote unit has lable #107224-0002. The other unit was run over by the car and is unavilable. Please send info on how to purchase replacable items . Thank you Larry Freeze 302 Guava Pl Brea, Ca. 92821f

—> Purchase or Repair:
#Advance Industries by Samuel Morales on 2009-04-04 08:42
The Advance Industries 116220 D 107243-0002 board is not powering on, hindering production.

—> Purchase or Repair:
#Advance Industries by Sandra Contreras on 2009-12-11 02:24
Hello, I hope you're doing well. I was asked to get the Advance Industries 116220 D 107243-0002 board fixed or replaced. Before making a decision, may I know if it's possible to repair this board or if it needs to be purchased new? I'm trying to get this resolved as soon as possible. Thank you for y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Rudy Martens on 2009-12-17 22:53
Machine displaying error code X32 upon startup.

—> Purchase or Repair:
#Advance Industries by Erdeljac on 2009-11-06 02:18
Hello, I'm reaching out for repair info on an Advance Industries 116220 D 107243-0002 board that stopped working. Can you provide details on where and how it can be repaired? Thanks.

—> Purchase or Repair:
#Advance Industries by daniele on 2009-11-29 14:19
I've noticed that the Advance Industries 116220 D 107243-0002 is experiencing issues seems like something stopped working on the board. It may require further inspection to determine the exact problem.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.