Advance Industries Service & Repair Forum

The Advance Industries 116220 D 107243-0002 board malfunctioned earlier today, causing significant downtime in the production. This occurred at 1030 AM, disrupting our operations. I need a quick resolution or workaround before the next shift starts. Thank you.

—> Purchase or Repair: Ticket Image

— Posted by nardini on 2009-10-05

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Leach on 2014-04-03 17:29
The circuit board in Advance Industries 116220 D 107243-0002 just went out, causing a machine shutdown. Need immediate replacement to keep the line running.

—> Purchase or Repair:
#Advance Industries by daniele on 2009-11-29 14:19
I've noticed that the Advance Industries 116220 D 107243-0002 is experiencing issues seems like something stopped working on the board. It may require further inspection to determine the exact problem.

—> Purchase or Repair:
#Advance Industries by john.gilmore on 2011-10-31 13:04
I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

—> Purchase or Repair:
#Advance Industries by Nabil Ghanem on 2009-11-18 09:51
The Advance Industries 116220 D 107243-0002 board is malfunctioning, causing a complete halt in the production line. Urgent repair service is required to address the issue

—> Purchase or Repair:
#Advance Industries by Cecilia Lobos on 2009-11-09 13:40
Hello, I hope this message finds you well. I am inquiring about the Advance Industries 116220 D 107243-0002 board. I would like to know if it is possible to have it repaired or if a replacement can be purchased. I am trying to

—> Purchase or Repair:
#Advance Industries by virenderm mudgil on 2015-08-12 16:20
Could you please provide information on whether the Advance Industries 116220 D 107243-0002 Gate Control Board is still supported or if replacement parts are available?

—> Purchase or Repair:
#Advance Industries by berrier on 2009-09-25 02:48
I'm sorry to inform you that something seems to have stopped working with your Advance Industries 116220 D 107243-0002. We're not entirely sure what the issue is, but we are looking into it to get it resolved as soon as possible. Thank you for your patience and understanding.

—> Purchase or Repair:
#Advance Industries by Jerry Fields on 2011-05-12 15:21
I need to purchase 2 ea. Advance Industries Garage Door OpenersFCC ID: BSH8YN213

—> Purchase or Repair:
#Advance Industries by Annadurdiev on 2009-10-11 14:22
The Advance Industries 116220 D 107243-0002 unit is currently down. Maintenance team has been notified.

—> Purchase or Repair:
#Advance Industries by Adlen on 2009-03-21 19:21
We are experiencing a critical failure in the circuit board of the Advance Industries 116220 D 107243-0002 equipment. Production has come to a halt and we require immediate repair service to get the line running again. Please prioritize this issue.

—> Purchase or Repair:
#Advance Industries by fahtom on 2009-10-19 14:22
The Advance Industries 116220 D 107243-0002 is showing error code E345 and is not starting up properly. Please advise on troubleshooting steps ASAP.

—> Purchase or Repair:
#Advance Industries by nevardo vera on 2005-10-27 01:00
Advance Industries 116220D 107243-0002 logic timer board is malfunctioning, causing a disruption in the production line. Need urgent repair to resume operations

—> Purchase or Repair:
#Advance Industries by bahat on 2009-11-15 01:37
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. Could you please let me know if it can be repaired or if a replacement can be purchased? I am trying to

—> Purchase or Repair:
#Advance Industries by tricarick on 2015-01-06 13:41
Gate control board on Industries 116220 D 107243-0002 just failed. Will troubleshoot and replace ASAP.

—> Purchase or Repair:
#Advance Industries by Hubie Colquitt on 2009-06-14 18:56
Could you please provide repair information for the Advance Industries 116220 D 107243-0002 board? Our team on-site urgently needs to replace it. Thank you.

—> Purchase or Repair:
#Advance Industries by Paco on 2009-12-19 18:47
The Advance Industries 116220 D 107243-0002 board is not working as reported.

—> Purchase or Repair:
#Advance Industries by Hasan Ahmed Syed on 2006-10-26 23:27
The control board (116220-D 107243-0002) on the production line is malfunctioning, causing disruptions and delays. Immediate repair service is needed to restore full production capacity.

—> Purchase or Repair:
#Advance Industries by Genoa on 2015-07-25 09:20
Hello, I'm inquiring about part number 116220 D 107243-0002, which is a Gate Control Board for Advance Industries. My client is experiencing some issues with this particular part and would like to get more information on repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Juan Martinez on 2009-12-29 09:17
Do you have an Advance Industries 116220 D 107243-0002 board available for repair or sale? Production is currently down and we need to keep it running. Thank you.

—> Purchase or Repair:
#Advance Industries by Jen Massey on 2014-05-02 10:20
Could you please confirm if the Advance Industries 116220 D 107243-0002 circuit board is still supported or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Advance Industries by keenan on 2014-04-14 18:32
The Advance Industries 116220 D 107243-0002 circuit board malfunctioned during the night shift. Please investigate and restore functionality.

—> Purchase or Repair:
#Advance Industries by nagarajan.g on 2009-03-09 12:11
Board on Advance Industries 116220 D 107243-0002 malfunctioned, needs immediate attention. Will investigate further and report back soon.

—> Purchase or Repair:
#Advance Industries by Lee Hodson on 2015-03-31 07:04
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working.

—> Purchase or Repair:
#Advance Industries by bekZitteeGeom on 2006-04-11 19:35
The control board on the Advance Industries 116220-D 107243-0002 is malfunctioning, causing a significant disruption to the production line. Immediate repair or replacement is necessary to resume operations without further delay.

—> Purchase or Repair:
#Advance Industries by JIM on 2008-10-01 19:53
COULD YOU POINT ME IN THE RIGHT DIRECTION FOR A MANUAL FOR A 116220D? I;M TRYING TO DISABLE THE TIMER OR ADD PHOTO EYES.

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Fredrick Goll on 2009-07-13 21:44
I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Charles Zulfer on 2009-05-03 13:03
The Advance Industries 116220 D 107243-0002 board caused downtime during the last shift. Need a quick explanation by the time the next shift starts.

—> Purchase or Repair:
#Advance Industries by Donald Fellwock on 2009-02-07 12:25
The Advance Industries 116220 D 107243-0002 board malfunctioned today during the afternoon shift, causing significant downtime. Can you please provide a quick explanation of what might have caused the issue before the next shift begins? Thank you.

—> Purchase or Repair:
#Advance Industries by Marques Cedric on 2014-12-16 22:44
Equipment ID Advance Industries 116220 D 107243-0002Issue Machine not powering up, displaying Error Code 302. Investigation needed ASAP. Please advise on next steps.

—> Purchase or Repair:
#Advance Industries by Ann Ratay on 2016-02-10 02:03
We have 2 overhead garage doors........... but no remotes. They are both Model 55A Garage Door Opener System by The Overhead Door Co. They were installed about 1985. Wondering if there are replacement remotes we can purchase anywhere.Would appreciate any information or help you could provide concern…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Charles Donnell on 2009-12-29 14:17
The Advance Industries 116220 D 107243-0002 board is currently not functioning. Please check it out as soon as possible. Thank you.

—> Purchase or Repair:
#Advance Industries by michael on 2009-05-08 12:48
I HAVE A KEW 16 40 HA, AND IM HAVING PROBLEMS TRYING TO FIX IT!IT WONT RUN AT ALL,THOUGHT IT MIGHT BE THE COIL , CHECKED THE WIERING! AND STILL NOTHING? HELPMANY THANKS MICHAEL

—> Purchase or Repair:
#Advance Industries by Donald Marcotte on 2013-01-21 16:15
I am looking for a circuit board Advanced Industries model No. 116220 D P/N 107243-0002 LOGIC TIMER

—> Purchase or Repair:
#Advance Industries by ENGLISH on 2009-03-11 18:11
The Advance Industries 116220 D 107243-0002 board is not functioning properly. Please address the issue

—> Purchase or Repair:
#Advance Industries by Lebedev on 2014-12-18 09:44
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Dan Potts on 2009-12-31 06:31
Hi there. We're in urgent need of repair information for an Advance Industries 116220 D 107243-0002 board. Urgently seeking guidance on replacement or repair. Appreciate a quick response. Thank you!

—> Purchase or Repair:
Hello, I'm reaching out to inquire about the Advance Industries 116220 D 107243-0002 board. We are looking to determine if this unit is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by Rudy Martens on 2009-12-17 22:53
Machine displaying error code X32 upon startup.

—> Purchase or Repair:
#Advance Industries by J.Y. on 2009-10-14 20:43
The Advance Industries 116220 D 107243-0002 unit is still down. Please provide an update as soon as possible.

—> Purchase or Repair:
#Advance Industries by Robberechts Senne on 2009-11-11 23:30
The Advance Industries 116220 D 107243-0002 board malfunctioned mid-shift. Need follow-up during the day.

—> Purchase or Repair:
#Advance Industries by manny on 2005-12-21 00:47
Logic timer board in Advance Industries 116220D 107243-0002 is malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by troy gowan on 2010-09-16 21:08
I have a overhead garage doors opener. model 100. I am looking for a replacment remot and reciverreciver number is 107224-0014

—> Purchase or Repair:
#Advance Industries by Peter Komrhel on 2009-11-25 17:15
Hello, we are in need of repair information for the Advance Industries 116220 D 107243-0002 board. Could you please provide us with details on how we can get this fixed as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by art on 2009-03-10 21:11
I'm currently experiencing an issue with the Advance Industries 116220 D 107243-0002 machine. It appears that the board may not be functioning properly as something has stopped working. I will need assistance to diagnose and resolve this issue as soon as possible.

—> Purchase or Repair:
#Advance Industries by Erdeljac on 2009-11-06 02:18
Hello, I'm reaching out for repair info on an Advance Industries 116220 D 107243-0002 board that stopped working. Can you provide details on where and how it can be repaired? Thanks.

—> Purchase or Repair:
I need a status update on the Advance Industries 116220 D 107243-0002 Circuit Board. The unit is still down. Please reply

—> Purchase or Repair:
#Advance Industries by Joseph Snow on 2011-01-21 14:15
Need a manual for a 24 volt AC power door opener, in order to hook it up

—> Purchase or Repair:
I'm following up again about the Advance Industries 116220 D 107243-0002 board. The unit is still down. Please provide an update

—> Purchase or Repair:
#Advance Industries by Dennis Sytsma on 2010-11-10 22:38
I need repair or replacement information regarding COPS board for the R-200 PN # 108939-0001 and other part numbers. Made by McKinney electronics for residential slide gate operator. Orginial part number was 940036-2 that came in a box marked overhead door company with no address. I purchased this s…Purchase or Repair: Ticket Image...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.