Advance Industries Service & Repair Forum

We experienced unexpected downtime with the Advance Industries 116220 D 107243-0002 board last night at 1000 pm. Please investigate and provide feedback urgently.

—> Purchase or Repair: Ticket Image

— Posted by Pertijs on 2009-11-24

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by bahat on 2009-11-15 01:37
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. Could you please let me know if it can be repaired or if a replacement can be purchased? I am trying to

—> Purchase or Repair:
#Advance Industries by Brian Sutherland on 2009-12-11 01:24
I have an Advance Industries 116220 D 107243-0002 board that is not functioning properly. Looking for a repair service to fix it

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-22 13:15
I have a touch n\'go remote garage door opener (390-19 mhz) for my overhead door garage opener and it works fine. I would love to get another one. I believe this has a date of 1985 on it and don\'t know if these are still possible to get. Any help? Thank yo

—> Purchase or Repair:
#Advance Industries by Luis Raul Godinez on 2006-11-16 11:57
The Advance Industries 116220-D 107243-0002 is a control board unit that is not functioning.

—> Purchase or Repair:
#Advance Industries by Fredrick Goll on 2009-07-13 21:44
I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Igor Tustanowski on 2009-01-18 04:58
Do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by Tibbetts on 2009-03-17 00:45
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this critical issue and get the production line back up and running.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board just failed on machine 5. Need to replace ASAP to avoid downtime.

—> Purchase or Repair:
#Advance Industries by Juan Martinez on 2009-12-29 09:17
Do you have an Advance Industries 116220 D 107243-0002 board available for repair or sale? Production is currently down and we need to keep it running. Thank you.

—> Purchase or Repair:
#Advance Industries by Chu on 2009-02-23 05:06
Hello, I represent a client who is experiencing some issues with an Advance Industries 116220 D 107243-0002 board. Could you please provide some information on potential repair options and costs for this specific part?Thank you.

—> Purchase or Repair:
#Advance Industries by Savoskin on 2009-11-25 04:52
Need help fixing Advance Industries 116220 D 107243-0002 board. We can't get it to power up, all lights remain off. Send someone ASAP. Thanks!

—> Purchase or Repair:
#Advance Industries by Steven Lorke on 2014-06-27 21:50
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Hubie Colquitt on 2009-06-14 18:56
Could you please provide repair information for the Advance Industries 116220 D 107243-0002 board? Our team on-site urgently needs to replace it. Thank you.

—> Purchase or Repair:
#Advance Industries by vu on 2009-12-31 18:48
Hello, I hope this message finds you well. I am reaching out regarding the Advance Industries 116220 D 107243-0002 board. Our team is looking to locate a replacement or repair option for this unit. Since it is older and we are unsure of the manufacturer, could you please confirm if this unit is stil…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Gordon Truex on 2014-03-28 13:52
Can you tell me if it is possible to get a replacement remote for a Touch n Go remote I purchaced in 1985. It is coded 390-19. there is an antenna model 702, ser#751015 if that helps. also the door opener is a model R80-az. Thank you

—> Purchase or Repair:
#Advance Industries by Reichling on 2009-12-03 08:09
The Advance Industries 116220 D 107243-0002 is malfunctioning. It is a board unit, but I'm not entirely sure about its function.

—> Purchase or Repair:
#Advance Industries by Luley on 2009-05-17 18:18
Drive or board failure on Advance Industries 116220 D 107243-0002. Need immediate attention to prevent downtime.

—> Purchase or Repair:
#Advance Industries by Russell Diaz on 2009-05-06 18:25
I work for Overhead Door Company of Las Cruces and we have the logic timer board in stock, but nobody hear seems to know what it goes into. We assume it\'s for a gate operator but we don\'t lnow which model> I believe it maybe for several different models.Can you help?Thanks

—> Purchase or Repair:
I'm working with Advance Industries 116220 D 107243-0002, and the board seems to be the issue. The equipment is down, and I'm not sure why. No error code is displaying. Please advise on next steps to troubleshoot.

—> Purchase or Repair:
#Advance Industries by CHE on 2009-10-18 17:47
I'm experiencing some issues with the Advance Industries 116220 D 107243-0002. It seems like there might be a problem with the board, as something has stopped working. I'll make sure to get this checked out and fixed as soon as possible.

—> Purchase or Repair:
#Advance Industries by Fred H Black on 2009-08-31 13:26
Drive or board (116220 D 107243-0002) failed in machine. Heading to assess issue now.

—> Purchase or Repair:
#Advance Industries by Udoh on 2009-12-18 22:06
Hello, I am interested in the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by mark casey on 2012-06-07 20:32
I have manual for this oard if you still need it

—> Purchase or Repair:
#Advance Industries by JORGE TALERO on 2009-05-25 01:00
Hello, I'm reaching out regarding the Advance Industries 116220 D 107243-0002 board. I was instructed to either repair or replace it, but I'm uncertain of its function. Could you please advise if this item can be repaired or if a new one needs to be purchased? I'm aiming to

—> Purchase or Repair:
#Advance Industries by Ray Knichel on 2009-08-01 17:02
Machine is not responding to power button; displaying error code E3.

—> Purchase or Repair:
#Advance Industries by Ray Hellmann on 2014-05-02 18:20
The Advance Industries 116220 D 107243-0002 circuit board is not working.

—> Purchase or Repair:
#Advance Industries by ENGLISH on 2009-03-11 18:11
The Advance Industries 116220 D 107243-0002 board is not functioning properly. Please address the issue

—> Purchase or Repair:
#Advance Industries by Babur on 2009-11-19 16:31
Machine not powering up.

—> Purchase or Repair:
#Advance Industries by MesusantAnges on 2009-12-29 10:17
Equipment 116220 D 107243-0002 is down. Error code 005 blinking red on display. Unable to power on or operate. Please advise on next steps. Thank you.

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by chris corey on 2016-02-17 20:03
im looking to replace a bsh8yn229 remote

—> Purchase or Repair:
#Advance Industries by Derek Baker on 2014-04-02 00:07
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line disruption. Urgent repair service needed to rectify the issue

—> Purchase or Repair:
#Advance Industries by Dave Mitton on 2009-10-16 17:31
Do you have any Advance Industries 116220 D 107243-0002 boards available for sale or repair to keep production running?

—> Purchase or Repair:
#Advance Industries by nevardo vera on 2005-10-27 01:00
Advance Industries 116220D 107243-0002 logic timer board is malfunctioning, causing a disruption in the production line. Need urgent repair to resume operations

—> Purchase or Repair:
#Advance Industries by Magaly Polo A. on 2009-11-16 16:58
The Advance Industries 116220 D 107243-0002 board is behaving unusually. It is not functioning as it normally does, exhibiting strange behavior.

—> Purchase or Repair:
#Advance Industries by DENISENKO on 2009-12-12 14:44
The Advance Industries 116220 D 107243-0002 is showing error code E043. Equipment is not powering up. Please advise on next steps for troubleshooting and repair.

—> Purchase or Repair:
#Advance Industries by Golub on 2009-10-22 20:59
Advance Industries 116220 D 107243-0002 is down with Error Code E12 indicating a board issue. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:
#Advance Industries by Donald Marcotte on 2013-01-21 16:15
I am looking for a circuit board Advanced Industries model No. 116220 D P/N 107243-0002 LOGIC TIMER

—> Purchase or Repair:
#Advance Industries by naden on 2009-08-14 20:50
Looking for repair on Advance Industries 116220 D 107243-0002 board. Currently not functioning or powering up. Need someone to diagnose and fix the issue

—> Purchase or Repair:
#Advance Industries by Dan Potts on 2009-12-31 06:31
Hi there. We're in urgent need of repair information for an Advance Industries 116220 D 107243-0002 board. Urgently seeking guidance on replacement or repair. Appreciate a quick response. Thank you!

—> Purchase or Repair:
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this issue and get the line running smoothly again.

—> Purchase or Repair:
#Advance Industries by Gaudette on 2009-07-13 09:11
I'm experiencing a problem with the Advance Industries 116220 D 107243-0002 - it seems like the board is malfunctioning. I'm not entirely sure what this model does, but something has definitely stopped working.

—> Purchase or Repair:
#Advance Industries by Dennis McCollums on 2009-11-19 17:31
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse.

—> Purchase or Repair:
#Advance Industries by Stalzer on 2009-07-27 04:35
The Advance Industries 116220 D 107243-0002 board unit is not working properly. Maintenance team needs to check and repair it.

—> Purchase or Repair:
#Advance Industries by Weir on 2009-09-02 19:21
Please prioritize addressing the malfunction on the Advance Industries 116220 D 107243-0002 board as it's significantly impacting our production line. Your urgent attention to this matter is required to resume operations

—> Purchase or Repair:
#Advance Industries by Genoa on 2015-07-25 09:20
Hello, I'm inquiring about part number 116220 D 107243-0002, which is a Gate Control Board for Advance Industries. My client is experiencing some issues with this particular part and would like to get more information on repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Curran on 2009-09-14 12:12
Looking for repair for an Advance Industries 116220 D 107243-0002 board. Unit not functioning, need a technician ASAP.

—> Purchase or Repair:
#Advance Industries by farag on 2009-11-09 16:40
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse. The unit is not functioning as expected, behaving strangely.

—> Purchase or Repair:
#Advance Industries by Royce D. Cooper on 2009-05-19 04:12
We are still waiting for a response regarding the Advance Industries 116220 D 107243-0002 board. Please provide an update as soon as possible as the unit is still down. Thank you.

—> Purchase or Repair:
#Advance Industries by Ron on 2009-08-21 11:38
Hello, I'm reaching out to inquire about repair information for an Advance Industries 116220 D 107243-0002 board that has stopped working. Could you provide details on how we can repair or replace it quickly? Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.