Mirtone Service & Repair Forum

We have a mirtone EC200 installed in a 36 unit Sr. Care complex with standard call switches in each unit and a call light outside the entry door on the exterior of each unit. The system is powered with a 24VAC transformer. We would like to replace the outdoor lights with a Horn/Strobe combination unit to provide for better indication of the call request for emergency personnel. QUESTION: Can we replace the 24VAC transformer with a 24VDC power supply so that we can use 24VDC horn/strobes on the exterior of the buildings? All field wiring would be compatible with this but I wasn\'t sure if the EC200 would operate on a DC supply. 24VDC Horn/strobes are readily available but 24VAC ones (especially when they have to be weatherproof too) are extremely hard to find and are very expensive. Any input would be appreciated.

—> Purchase or Repair: Ticket Image

— Posted by Dan - North Coast Refrigeration & Electric, Inc on 2010-07-12

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Mirtone"

If you need your Mirtone unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 89 Comments

#Mirtone by Chris Atwater on 2013-06-28 04:23
Please provide details about the Mirtone 79044 25412275rev7 Zone Board. Is this product still supported, and are replacement parts available? Thank you.

—> Purchase or Repair:
#Mirtone by darren kotzur on 2008-02-16 00:00
Mir-tone Assy. 72024100 motherboard not powering up, no lights or display. Need repair service ASAP.

—> Purchase or Repair:
#Mirtone by vargas on 2013-07-26 05:32
The Mirtone 79044 25412275rev7 Zone Board is malfunctioning, leading to a disruption in our production line. Immediate repair or replacement is necessary to resume operations

—> Purchase or Repair:
#Mirtone by Jonkman on 2013-07-25 16:32
I'm experiencing some issues with the Mirtone 749044 25412275rev7 Zone Board... something seems to have stopped working.

—> Purchase or Repair:
#Mirtone by BLEVINS on 2010-02-03 23:36
Hello, I am reaching out to inquire about the Mirtone 79045-2 alarm board. Our team is looking for information on whether this unit is still supported or if replacement parts are available. Could you please provide details on the current status of this product? Thank you.

—> Purchase or Repair:
#Mirtone by sambilay on 2010-02-11 09:26
Unit 79045-2 alarm board malfunctioned mid-shift. Please have a technician check it in the morning.

—> Purchase or Repair:
#Mirtone by Remus on 2013-08-20 13:32
Board failure on Mirtone 79044 25412275rev7 Zone Board identified during maintenance rounds. Needs immediate attention to avoid disruptions.

—> Purchase or Repair:
#Mirtone by Jim Rap on 2010-10-31 09:43
Hello, I am inquiring about a Mirtone 79045-2 Alarm Board that needs repair. Can you please provide information on the repair process and cost estimate for this specific part? Thank you.

—> Purchase or Repair:
#Mirtone by Chairully on 2013-08-06 02:32
Our Mirtone 749044 25412275rev7 Zone Board stopped working. Need a replacement but can't find one. Please provide repair info asap. Thank you!

—> Purchase or Repair:
#Mirtone by rosemary on 2025-06-06 13:08
Could you please provide repair information for a Mirtone QSP218 50064 Circuit Board? We need a quick answer for a replacement. Thank you!

—> Purchase or Repair:
#Mirtone by Robert on 2013-06-13 18:11
No power being supplied to the door lock. Unit is clicking when door release pressed but no power being supplies to door lock. Anyone have an answer or solution for this ?

—> Purchase or Repair:
#Mirtone by bethel graphics on 2013-05-16 19:54
The Mirtone 749044 25412275rev7 Zone Board in the warehouse is not functioning as usual. It is displaying unusual behavior, but I am not certain what the specific issue is.

—> Purchase or Repair:
#Mirtone by saini on 2013-07-24 23:32
I can help with that. I'll reach out to the manufacturer to inquire about support and parts availability for the Mirtone 79044 25412275rev7 Zone Board.

—> Purchase or Repair:
#Mirtone by Agarwal on 2013-04-05 13:46
I'm experiencing some issues with the Mirtone 749044 25412275rev7. It seems like the machine has stopped functioning properly. Can you help troubleshoot the problem?

—> Purchase or Repair:
#Mirtone by Maryellen Kucera on 2013-06-11 17:43
Do you have a Mirtone 749044 25412275rev7 Zone Board available for sale or repair? Need to get production back up quickly.

—> Purchase or Repair:
#Mirtone by Jimmy Alexander on 2010-08-21 20:30
Hello, I'm interested in purchasing a Mirtone 79045-2 Alarm Board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Mirtone by Korin on 2010-08-22 11:57
Mirtone 79045-2 alarm board not powering on, halting production.

—> Purchase or Repair:
#Mirtone by tim stokolosa on 2009-01-17 14:06
My customer has an 8 floor.20 suite/floor mirtone system with pull stations in all suites.each suite is decoded in the mirtone on each floor and then on the first and second floor there are two master stations to decode the floor number. The system is only local to the caretaker.The owners want all …Purchase or Repair: Ticket Image...
Show More
#Mirtone by Basheer on 2013-03-16 22:15
Need repair for Mirtone 79044 25412275rev7 Zone Board. Not functioning, looking for technician to fix industrial unit

—> Purchase or Repair:
#Mirtone by Dennis Hoard on 2011-03-20 22:58
Mircom Intercom Amplifer -MA-485 \"do,s not have any audio sound aplification needed to operate an apartment intercom station . I beleive when the oringinal split transformer 8v for door and 16 vac for the audio burned out\" because the pos+ side came lose and grounded to the neg - side the replacem…Purchase or Repair: Ticket Image...
Show More
#Mirtone by SPYROS C MASTER on 2013-09-24 05:48
Unit 79044 25412275rev7 (Zone Board) went down mid-shift. Need follow-up during the day.

—> Purchase or Repair:
#Mirtone by Jack McCUrdy on 2013-09-11 12:28
Unit 25412275rev7 (Mirtone 79044) zone board is malfunctioning. Needs attention ASAP. Please check and reset during AM shift.

—> Purchase or Repair:
#Mirtone by MATHUR on 2010-11-08 22:31
Hi there, I need repair info on a Mirtone 79045-2 Alarm Board that stopped working. Can you please provide guidance on how to fix or replace it? Thank you!

—> Purchase or Repair:
#Mirtone by Sghedoni Giorgio on 2010-08-18 08:40
Could you please confirm if the Mirtone 79045-2 Alarm Board is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#Mirtone by Jesus Maldonado on 2013-06-25 12:36
the Mirtone 79044 25412275rev7 zone board on unit XYZ went down mid-shift. Please check it out and get it back up and running. Thanks!

—> Purchase or Repair:
#Mirtone by Parida on 2013-08-14 14:32
Can the Mirtone 749044 25412275rev7 Zone Board be repaired or replaced? Just trying to check this off my to-do list.

—> Purchase or Repair:
#Mirtone by Canaves on 2013-03-11 14:53
Zone board on Mirtone 749044 25412275rev7 failed during rounds. Need urgent attention to replace board for system functionality.

—> Purchase or Repair:
#Mirtone by Pavlicek on 2013-07-22 15:32
the Mirtone 749044 25412275rev7 zone board malfunctioned and needs attention. Please check and repair during the day shift. Thanks!

—> Purchase or Repair:
#Mirtone by Rick Burdge on 2009-05-07 17:57
looking for a unitsystem is in an apartment complex. tenant can operate one entrance and hear from same however 2nd entrance does not work

—> Purchase or Repair:
#Mirtone by Hassan Nab on 2010-06-15 08:05
the Mirtone 79045-2 alarm board went down mid-shift. Please have someone check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Mirtone by steve reyes on 2013-08-10 05:35
Do you have a Mirtone 79044 25412275rev7 Zone Board available for sale or repair? Our unit is down, and we need to keep production running. Thank you.

—> Purchase or Repair:
#Mirtone by andré desjardins on 2008-08-06 21:37
hello we did renovation and we broke a wire now we need the sqematic for it thank you

—> Purchase or Repair:
#Mirtone by Barry Kater on 2008-02-19 00:23
I am repairing a door lock at an apartment block showing these symptoms.A transformer feeding the MA-485 is outputting 19.25 volts...will this harm the unit.It is a 16 volt amplifier.B when an apartment station depresses the door button the output at the amplifier terminals for the ac door reads 19.…Purchase or Repair: Ticket Image...
Show More
#Mirtone by Graficas Dimensión on 2013-02-13 00:00
Can the Mirtone 79044 board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Mirtone by Mark Bateman on 2013-01-19 20:03
Can the Mirtone 79044 25412275rev7 Zone Board be repaired or replaced? I'm looking to address this

—> Purchase or Repair:
#Mirtone by Bruce Aronson on 2008-06-25 04:22
Mirtone now owned by GE and system is 20+ years old - No manuals or hookup diagram left - please help

—> Purchase or Repair:
#Mirtone by Bennie Johnson on 2013-11-14 01:19
Hello, could you please provide repair information for Mirtone 749044 25412275rev7 Zone Board? It has stopped working and we need a replacement. Thank you.

—> Purchase or Repair:
#Mirtone by Ankur Patel on 2010-11-28 23:11
Having issues with the Mirtone 79045-2 Alarm Board. Need a repair technician to check and fix the industrial unit. Please respond if you can help.

—> Purchase or Repair:
#Mirtone by fatah on 2013-10-02 09:55
The Mirtone 749044 25412275rev7 is not functioning properly. Please take a look and assess the issue. Thank you.

—> Purchase or Repair:
#Mirtone by DENNIS M GOMEZ on 2010-08-15 20:41
Hello, I am inquiring about a Mirtone 79045-2 Alarm Board for a client. They are experiencing issues with it and would like to know if you are able to provide repair services for this specific part. Thank you.

—> Purchase or Repair:
#Mirtone by R.Jim White/WSM on 2007-05-08 23:21
Hi...I have one customer with no voltage to the door striker but have confirmed the striker works. Transformer is ok! Do you have the parts for this, relay etc to ship so I can repair it or do you have a re-conditioned unit for sale. The seniors in thecomplex want it yesterday..Can you help?R.Jim Wh…Purchase or Repair: Ticket Image...
Show More
#Mirtone by Patrick Blade on 2010-01-21 21:49
Can the Mirtone 79045-2 Alarm Board be repaired or purchased? I'm looking to check this off my to-do list. Thank you!

—> Purchase or Repair:
#Mirtone by dedra landon on 2010-09-22 10:38
Mirtone 79045-2 alarm board displaying error code E23 and preventing machine from powering on.

—> Purchase or Repair:
#Mirtone by Volker Schmidt on 2013-04-06 08:57
The Mirtone 749044 25412275rev7 is a Zone Board unit, but I'm not fully familiar with it yet. Maintenance team reported that the unit is not working and needs attention.

—> Purchase or Repair:
#Mirtone by Construction on 2013-08-16 14:32
Mirtone 79044 25412275rev7 Zone Board not powering on, halting production.

—> Purchase or Repair:
#Mirtone by Christiane Larouche on 2009-05-17 13:44
please send manual mirtone ec200 but tone stop laps time small please send me why do it the time = laps time long.ThanksJ\'aimerais savoir comment faire pour mettre le signal sonore sans interruption automatique. C\'est à dire que je veux l\'arrêter moi-même. Merci

—> Purchase or Repair:
#Mirtone by Yoshihiro Kawazoe on 2013-08-20 12:32
Hello, I hope this message finds you well. We are looking for information regarding the Mirtone 749044 25412275rev7 Zone Board. Could you please confirm if this unit is still supported or if there are replacement parts available for it? Thank you.

—> Purchase or Repair:
#Mirtone by Relivosse on 2013-02-13 19:06
The Mirtone 79044 25412275rev7 Zone Board in the warehouse is exhibiting unusual behavior, deviating from its normal operations.

—> Purchase or Repair:
#Mirtone by rick gatchell on 2013-04-10 12:44
The Mirtone 749044 25412275rev7 is a Zone Board that is not currently working.

—> Purchase or Repair:
#Mirtone by lalji on 2013-08-08 19:32
I am following up once again regarding the Mirtone 749044 25412275rev7 Zone Board issue. The unit is still down. Please provide an update at your earliest convenience.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.