Advance Industries Service & Repair Forum

Hi,I am in desparate need of a wiring diagram for an Advance industries 116220D board for a Mckinney Electronics operator. We need to add a reflective detector and the board we have does not have a labelled terminal block. We would appreciate any information you might have.Thanks,DeeAnne

—> Purchase or Repair: Ticket Image

— Posted by DeeAnne on 2005-08-30

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by monty clifcorn on 2014-09-23 23:23
The tag over three box relays says MFD. ADVANCE INDUSTRIES, APPLETON, WIS. with the controller model no. tagged on the circuit board. I may need a new board or repair to the board. One of the relays continues a slow click as long as the opener is plugged in to power. Please advise. Thanks.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Curran on 2009-09-14 12:12
Looking for repair for an Advance Industries 116220 D 107243-0002 board. Unit not functioning, need a technician ASAP.

—> Purchase or Repair:
#Advance Industries by mohammed on 2009-06-26 13:28
The unit "Advance Industries 116220 D 107243-0002" is not functioning. Please have a look at it. Thank you.

—> Purchase or Repair:
It seems like there may be an issue with the Advance Industries 116220 D 107243-0002 board. Something seems to have stopped working, and I'm not entirely sure what that could mean functionally. I'll do my best to figure it out and get it resolved for you.

—> Purchase or Repair:
#Advance Industries by Jeremiah Albright on 2009-09-03 07:12
Hello, the Advance Industries 116220 D 107243-0002 is currently down. The display is showing Error Code 4 and there is a constant alarm going off. Please advise on potential causes and next steps for repair. Thank you.

—> Purchase or Repair:
#Advance Industries by Rodrigo Avendano on 2009-08-17 16:02
Can you please provide information on repairs for Advance Industries 116220 D 107243-0002 board? The client is experiencing issues and needs guidance.

—> Purchase or Repair:
#Advance Industries by DeeAnne on 2005-08-30 23:03
Hi,I am in desparate need of a wiring diagram for an Advance industries 116220D board for a Mckinney Electronics operator. We need to add a reflective detector and the board we have does not have a labelled terminal block. We would appreciate any information you might have.Thanks,DeeAnne—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Nabil Ghanem on 2009-11-18 09:51
The Advance Industries 116220 D 107243-0002 board is malfunctioning, causing a complete halt in the production line. Urgent repair service is required to address the issue

—> Purchase or Repair:
#Advance Industries by McSpadden on 2009-11-17 20:23
I'm sorry, but something seems to be off with the Advance Industries 116220 D 107243-0002 board. It appears to have stopped working properly.

—> Purchase or Repair:
#Advance Industries by Aldo G. Quilang on 2009-05-02 02:09
Hello, I am interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by jarvis on 2009-11-04 10:40
the Advance Industries 116220 D 107243-0002 board went down mid-shift. Need someone to check it out and troubleshoot ASAP. Thanks!

—> Purchase or Repair:
#Advance Industries by RS on 2009-12-26 00:04
I will reach out to Advance Industries regarding the Advance Industries 116220 D 107243-0002 board to inquire about support and parts availability.

—> Purchase or Repair:
#Advance Industries by Joe ODonovan on 2009-01-04 10:39
Hi, the Advance Industries 116220 D 107243-0002 is displaying Error Code 12 and the power indicator light is blinking red. The equipment is not responding to any commands. Please advise on troubleshooting steps or repairs needed. Thank you.

—> Purchase or Repair:
#Advance Industries by khulaif abdullah on 2009-08-30 23:06
The Advance Industries 116220 D 107243-0002 board is not working. — See more:

—> Purchase or Repair:
#Advance Industries by bekZitteeGeom on 2006-04-11 19:35
The control board on the Advance Industries 116220-D 107243-0002 is malfunctioning, causing a significant disruption to the production line. Immediate repair or replacement is necessary to resume operations without further delay.

—> Purchase or Repair:
#Advance Industries by Robberechts Senne on 2009-11-11 23:30
The Advance Industries 116220 D 107243-0002 board malfunctioned mid-shift. Need follow-up during the day.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board just failed on machine 5. Need to replace ASAP to avoid downtime.

—> Purchase or Repair:
#Advance Industries by CHE on 2009-10-18 17:47
I'm experiencing some issues with the Advance Industries 116220 D 107243-0002. It seems like there might be a problem with the board, as something has stopped working. I'll make sure to get this checked out and fixed as soon as possible.

—> Purchase or Repair:
#Advance Industries by Bonnie Pierson on 2009-08-19 20:31
The Advance Industries 116220 D 107243-0002 board is not functioning and needs attention from the maintenance team.

—> Purchase or Repair:
#Advance Industries by JORGE TALERO on 2009-05-25 01:00
Hello, I'm reaching out regarding the Advance Industries 116220 D 107243-0002 board. I was instructed to either repair or replace it, but I'm uncertain of its function. Could you please advise if this item can be repaired or if a new one needs to be purchased? I'm aiming to

—> Purchase or Repair:
#Advance Industries by Alexandros on 2009-11-19 10:02
Can this Advance Industries 116220 D 107243-0002 board be repaired or replaced? I'm just trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by Jen Massey on 2014-05-02 10:20
Could you please confirm if the Advance Industries 116220 D 107243-0002 circuit board is still supported or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Advance Industries by Juan Martinez on 2009-12-29 09:17
Do you have an Advance Industries 116220 D 107243-0002 board available for repair or sale? Production is currently down and we need to keep it running. Thank you.

—> Purchase or Repair:
#Advance Industries by Igor Tustanowski on 2009-01-18 04:58
Do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by Dennis McCollums on 2009-11-19 17:31
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse.

—> Purchase or Repair:
#Advance Industries by Williams on 2009-11-13 00:48
I have been searching everywhere for an opener to my garage door.It is an older model manufactured by Overhead Door with a transformer attached manufactured by Advance Industries class 2 year \'92 model.If you have a solution please email me or call me at (903)819-5907.

—> Purchase or Repair:
#Advance Industries by Mr.Simon on 2015-07-30 16:20
Can the Advance Industries 116220 D 107243-0002 Gate Control Board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by CrurordVoxy on 2014-02-20 08:00
Experiencing issues with Advance Industries circuit board 116220 D 107243-0002, causing production downtime. Need repair service ASAP to get the industrial unit operational again.

—> Purchase or Repair:
#Advance Industries by Juergen.Arpe on 2009-12-29 13:17
I've noticed an issue with the Advance Industries 116220 D 107243-0002. It seems like something on the board has stopped working, but I'm not entirely sure what it does. I will report it to the appropriate department for further investigation.

—> Purchase or Repair:
#Advance Industries by Reichling on 2009-12-03 08:09
The Advance Industries 116220 D 107243-0002 is malfunctioning. It is a board unit, but I'm not entirely sure about its function.

—> Purchase or Repair:
#Advance Industries by bahat on 2009-11-15 01:37
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. Could you please let me know if it can be repaired or if a replacement can be purchased? I am trying to

—> Purchase or Repair:
#Advance Industries by Udoh on 2009-12-18 22:06
Hello, I am interested in the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Hubie Colquitt on 2009-06-14 18:56
Could you please provide repair information for the Advance Industries 116220 D 107243-0002 board? Our team on-site urgently needs to replace it. Thank you.

—> Purchase or Repair:
#Advance Industries by ODonovan on 2009-11-09 14:40
Hi there, I am reaching out on behalf of our client regarding part number 116220 D 107243-0002, which involves a board issue. Can you please provide more information on the repair process and estimated cost? Thank you.

—> Purchase or Repair:
#Advance Industries by ismael on 2014-02-19 07:19
The Advance Industries 116220 D 107243-0002 circuit board malfunctioned causing unexpected downtime earlier today around 1130 am. Need to resolve this issue before the next shift starts. Any insights or suggestions would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by keenan on 2014-04-14 18:32
The Advance Industries 116220 D 107243-0002 circuit board malfunctioned during the night shift. Please investigate and restore functionality.

—> Purchase or Repair:
#Advance Industries by Helvie on 2009-12-04 02:00
Please advise if the Advance Industries 116220 D 107243-0002 board is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by chris corey on 2016-02-17 20:03
im looking to replace a bsh8yn229 remote

—> Purchase or Repair:
#Advance Industries by Brian Hill on 2009-07-30 20:35
Hello, we need repair information for Advance Industries 116220 D 107243-0002 board. Can you provide details quickly? Thank you.

—> Purchase or Repair:
#Advance Industries by Weir on 2009-09-02 19:21
Please prioritize addressing the malfunction on the Advance Industries 116220 D 107243-0002 board as it's significantly impacting our production line. Your urgent attention to this matter is required to resume operations

—> Purchase or Repair:
#Advance Industries by Babur on 2009-11-19 16:31
Machine not powering up.

—> Purchase or Repair:
#Advance Industries by Kei Saito on 2005-12-09 21:47
The Advance Industries 116220D logic timer board with model number 107243-0002 is behaving unexpectedly. It is not operating as usual and displaying strange characteristics. Please investigate the issue further to determine the cause of the abnormal behavior.

—> Purchase or Repair:
#Advance Industries by nardini on 2009-10-05 07:41
The Advance Industries 116220 D 107243-0002 board malfunctioned earlier today, causing significant downtime in the production. This occurred at 1030 AM, disrupting our operations. I need a quick resolution or workaround before the next shift starts. Thank you.

—> Purchase or Repair:
#Advance Industries by Schanz on 2009-01-13 23:00
Hello, I am contacting you on behalf of our client regarding Advance Industries 116220 D 107243-0002. They are experiencing issues with the board and are seeking assistance. Please provide details on how we can proceed with repair or replacement. Thank you.

—> Purchase or Repair:
#Advance Industries by Toniolli on 2009-03-09 18:49
The Advance Industries 116220 D 107243-0002 board is not functioning normally. It is displaying unusual behavior and not performing its regular functions.

—> Purchase or Repair:
I noticed that the Advance Industries 116220 D 107243-0002 is experiencing an issue with the board. It seems like something has stopped working, but I'm not entirely sure what the specific problem is. I'll try to gather more information to provide a clearer picture of the situation.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Leonce Collins on 2007-01-13 16:23
Need logic board 116220DModel 107243-0002Do you have that availableLeonce Collins504-722-4729

—> Purchase or Repair:
#Advance Industries by david ambler on 2010-09-08 12:31
Remote shows FCC# only the garage door opener is overhead door 450A I would like to find another spare remote.It is medium brown in color with a brown button and an ivory color button .The remote operates 2 doors and has 2 code selection modules one for each door.

—> Purchase or Repair:
#Advance Industries by Golub on 2009-10-22 20:59
Advance Industries 116220 D 107243-0002 is down with Error Code E12 indicating a board issue. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:
#Advance Industries by Fredrick Goll on 2009-07-13 21:44
I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I y…Purchase or Repair: Ticket Image...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.