Mirtone Service & Repair Forum

Mircom Intercom Amplifer -MA-485 \"do,s not have any audio sound aplification needed to operate an apartment intercom station . I beleive when the oringinal split transformer 8v for door and 16 vac for the audio burned out\" because the pos+ side came lose and grounded to the neg - side the replacement was a 120- AC 24 volt 1.67 Amp 40 that I believe it damaged the amplifier circuit \"leading to no sound at the intercom station.Please correct me if I\'m wrong at my way of thinking. leewright

—> Purchase or Repair: Ticket Image

— Posted by Dennis Hoard on 2011-03-20

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Mirtone"

If you need your Mirtone unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 89 Comments

#Mirtone by Ray Hellmann on 2013-05-07 03:33
Can you please confirm if the Mirtone 749044 25412275rev7 Zone Board is still supported or if parts are available for repair? Thank you.

—> Purchase or Repair:
#Mirtone by steve reyes on 2013-08-10 05:35
Do you have a Mirtone 79044 25412275rev7 Zone Board available for sale or repair? Our unit is down, and we need to keep production running. Thank you.

—> Purchase or Repair:
#Mirtone by Graficas Dimensión on 2013-02-13 00:00
Can the Mirtone 79044 board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Mirtone by Rick Burdge on 2009-05-07 17:57
looking for a unitsystem is in an apartment complex. tenant can operate one entrance and hear from same however 2nd entrance does not work

—> Purchase or Repair:
#Mirtone by jarvis on 2013-07-14 08:57
Could you please confirm if the Mirtone 749044 25412275rev7 Zone Board is still supported or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#Mirtone by street on 2010-09-29 21:17
The Mirtone 79045-2 alarm board is malfunctioning, causing delays in production. Immediate repair service is needed to avoid further disruption to the production line. Please address this issue urgently.

—> Purchase or Repair:
#Mirtone by Molauploady on 2013-07-15 23:44
The Mirtone 79044 25412275rev7 Zone Board is malfunctioning, causing a production line disruption. Immediate repair and restoration are critical to resume operations swiftly.

—> Purchase or Repair:
#Mirtone by Stamper on 2010-12-14 16:55
The Mirtone 79045-2 alarm board experienced a malfunction today, causing downtime in the unit. This occurred at 1130 AM. Can you provide a quick explanation for what happened before the next shift arrives?

—> Purchase or Repair:
#Mirtone by Hassan Nab on 2010-06-15 08:05
the Mirtone 79045-2 alarm board went down mid-shift. Please have someone check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Mirtone by dedra landon on 2010-09-22 10:38
Mirtone 79045-2 alarm board displaying error code E23 and preventing machine from powering on.

—> Purchase or Repair:
#Mirtone by Jonkman on 2013-07-25 16:32
I'm experiencing some issues with the Mirtone 749044 25412275rev7 Zone Board... something seems to have stopped working.

—> Purchase or Repair:
#Mirtone by Canaves on 2013-03-11 14:53
Zone board on Mirtone 749044 25412275rev7 failed during rounds. Need urgent attention to replace board for system functionality.

—> Purchase or Repair:
#Mirtone by yann bedu on 2010-03-19 21:27
Mirtone 79045-2 Alarm Board is malfunctioning, urgently requires repair to resume production. Requesting immediate attention to minimize downtime.

—> Purchase or Repair:
#Mirtone by Jimmy Alexander on 2010-08-21 20:30
Hello, I'm interested in purchasing a Mirtone 79045-2 Alarm Board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Mirtone by lalji on 2013-08-08 19:32
I am following up once again regarding the Mirtone 749044 25412275rev7 Zone Board issue. The unit is still down. Please provide an update at your earliest convenience.

—> Purchase or Repair:
#Mirtone by Chris on 2025-06-16 08:12
Need wiring hookup diagram for a Mirtone 79030

—> Purchase or Repair:
#Mirtone by andrisol on 2010-02-16 14:51
The Mirtone 79045-2 alarm board is not working.

—> Purchase or Repair:
#Mirtone by saini on 2013-07-24 23:32
I can help with that. I'll reach out to the manufacturer to inquire about support and parts availability for the Mirtone 79044 25412275rev7 Zone Board.

—> Purchase or Repair:
#Mirtone by Lorena Reyes on 2010-11-18 13:17
My Mirtone 79045-2 alarm board is malfunctioning, and I need a technician to repair it

—> Purchase or Repair:
#Mirtone by Vlade on 2013-05-25 10:24
Mirtone 79044 25412275rev7 Zone Board is not functioning, production is offline.

—> Purchase or Repair:
#Mirtone by BLEVINS on 2010-02-03 23:36
Hello, I am reaching out to inquire about the Mirtone 79045-2 alarm board. Our team is looking for information on whether this unit is still supported or if replacement parts are available. Could you please provide details on the current status of this product? Thank you.

—> Purchase or Repair:
#Mirtone by AARON RAWLES on 2013-08-06 10:32
The Mirtone 79044 25412275rev7 Zone Board in the warehouse is behaving unusually. It is not functioning as it typically does, displaying odd behavior.

—> Purchase or Repair:
#Mirtone by Derek Venhuizen on 2025-06-07 04:15
We are experiencing a critical issue with the Mirtone 71269F Fire Alarm Panel on the production line. The system is failing to trigger alarms during the testing phase, posing a serious safety risk. Urgent repairs are required to get operations back on track quickly.

—> Purchase or Repair:
#Mirtone by bethel graphics on 2013-05-16 19:54
The Mirtone 749044 25412275rev7 Zone Board in the warehouse is not functioning as usual. It is displaying unusual behavior, but I am not certain what the specific issue is.

—> Purchase or Repair:
#Mirtone by Pellegrini Yves on 2013-02-26 13:28
The Mirtone 749044 25412275rev7 Zone Board in our warehouse is exhibiting unusual behavior. It is not functioning as it normally does. Please investigate this issue at your earliest convenience.

—> Purchase or Repair:
#Mirtone by Mark Bateman on 2013-01-19 20:03
Can the Mirtone 79044 25412275rev7 Zone Board be repaired or replaced? I'm looking to address this

—> Purchase or Repair:
#Mirtone by Construction on 2013-08-16 14:32
Mirtone 79044 25412275rev7 Zone Board not powering on, halting production.

—> Purchase or Repair:
#Mirtone by DENNIS LOPEZ on 2013-07-01 08:47
Mirtone 749044 25412275rev7 Zone Board not responding, production offline.

—> Purchase or Repair:
#Mirtone by Dennis Hoard on 2011-03-20 22:58
Mircom Intercom Amplifer -MA-485 \"do,s not have any audio sound aplification needed to operate an apartment intercom station . I beleive when the oringinal split transformer 8v for door and 16 vac for the audio burned out\" because the pos+ side came lose and grounded to the neg - side the replacem…Purchase or Repair: Ticket Image...
Show More
#Mirtone by Bennie Johnson on 2013-11-14 01:19
Hello, could you please provide repair information for Mirtone 749044 25412275rev7 Zone Board? It has stopped working and we need a replacement. Thank you.

—> Purchase or Repair:
#Mirtone by sambilay on 2010-02-11 09:26
Unit 79045-2 alarm board malfunctioned mid-shift. Please have a technician check it in the morning.

—> Purchase or Repair:
#Mirtone by Coletta on 2013-10-19 01:00
Could you please confirm if the Mirtone 79044 25412275rev7 Zone Board is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:
#Mirtone by Thoma on 2013-03-25 04:32
Mirtone 79044 25412275rev7 Zone Board not powering up.

—> Purchase or Repair:
#Mirtone by denton on 2013-07-25 00:32
Hello, the Mirtone 79044 Zone Board is displaying error code ER345. The alarm is continuously sounding, and all zones are appearing as inactive. Urgent assistance is required to troubleshoot and resolve this issue

—> Purchase or Repair:
#Mirtone by Relivosse on 2013-02-13 19:06
The Mirtone 79044 25412275rev7 Zone Board in the warehouse is exhibiting unusual behavior, deviating from its normal operations.

—> Purchase or Repair:
#Mirtone by Ubaid on 2013-12-23 04:37
The Mirtone 749044 25412275rev7 Zone Board is displaying Error Code E13 and not detecting any input from Zone 3. Need urgent service to troubleshoot and resolve the issue.

—> Purchase or Repair:
#Mirtone by andré desjardins on 2008-08-06 21:37
hello we did renovation and we broke a wire now we need the sqematic for it thank you

—> Purchase or Repair:
#Mirtone by sabahattin YILMAZ on 2013-08-13 13:32
Could you please verify if the Mirtone 79044 25412275rev7 Zone Board is still supported by the manufacturer or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Mirtone by tim stokolosa on 2009-01-17 14:06
My customer has an 8 floor.20 suite/floor mirtone system with pull stations in all suites.each suite is decoded in the mirtone on each floor and then on the first and second floor there are two master stations to decode the floor number. The system is only local to the caretaker.The owners want all …Purchase or Repair: Ticket Image...
Show More
#Mirtone by DENNIS M GOMEZ on 2010-08-15 20:41
Hello, I am inquiring about a Mirtone 79045-2 Alarm Board for a client. They are experiencing issues with it and would like to know if you are able to provide repair services for this specific part. Thank you.

—> Purchase or Repair:
#Mirtone by Maryellen Kucera on 2013-06-11 17:43
Do you have a Mirtone 749044 25412275rev7 Zone Board available for sale or repair? Need to get production back up quickly.

—> Purchase or Repair:
#Mirtone by john Voorhis on 2010-11-20 07:54
The Mirtone 79045-2 alarm board in the warehouse is exhibiting abnormal behavior. It is not functioning as it typically does, and its operations seem odd.

—> Purchase or Repair:
#Mirtone by Jim Rap on 2010-10-31 09:43
Hello, I am inquiring about a Mirtone 79045-2 Alarm Board that needs repair. Can you please provide information on the repair process and cost estimate for this specific part? Thank you.

—> Purchase or Repair:
#Mirtone by Ankur Patel on 2010-11-28 23:11
Having issues with the Mirtone 79045-2 Alarm Board. Need a repair technician to check and fix the industrial unit. Please respond if you can help.

—> Purchase or Repair:
#Mirtone by Moisés Fernandes Cunha on 2010-08-13 00:15
The Mirtone 79045-2 alarm board is not working, as reported by the shop.

—> Purchase or Repair:
#Mirtone by selina drake hohn on 2009-12-24 13:59
Hello, I am trying to obtain a manuel for the mirtone 7800 series fire alarm system. I can\'t seem to locate one. Could you direct me to where i can either down load one or purchase one? Thank you,Selina

—> Purchase or Repair:
#Mirtone by William Arndt on 2010-08-06 08:33
Could you please provide me with pricing and availability information for the Mirtone 79045-2 Alarm Board? I am looking to source one quickly and would appreciate your assistance. Thank you.

—> Purchase or Repair:
#Mirtone by Patrick Blade on 2010-01-21 21:49
Can the Mirtone 79045-2 Alarm Board be repaired or purchased? I'm looking to check this off my to-do list. Thank you!

—> Purchase or Repair:
#Mirtone by Jack McCUrdy on 2013-09-11 12:28
Unit 25412275rev7 (Mirtone 79044) zone board is malfunctioning. Needs attention ASAP. Please check and reset during AM shift.

—> Purchase or Repair:
#Mirtone by Travis Brown on 2019-09-20 18:15
The Mirtone 71269F fire alarm panel unit isn't functioning. Maintenance team needs to check it.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.