B for Service call 1-336-969-0110 at Industrial Electronics Repair

B Service & Repair Forum

If you need your B tested or repaired then give us a call. We offer free estimates and offer extended warranties. You can contact us at 1-(336)-969-0110 Shipping/Receiving Industrial Electronic Repair 931-E S. Main St #204, Kernersville, NC 27284 Phone: (336) 969-0110 We repair industrial electronic devices If you have an industrial electronic device that needs repair, Feel free to contact us!

— Posted by Sales on 2005-05-09

Reply🗨️Ask a New Question Below❓

If you need your B unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 838 Comments

#Bowe Systec by albert boluso on 2008-06-25 06:43

do you repair the maxax 100 servo driver amplifier?if you do,can you gave us information how much it will cost?im looking forward for this issue thanks....

—> Purchase or Repair:

#Brothers by Richard Browne on 2010-11-11 11:16

Equipment ID Brothers S29009-001Issue Equipment not powering upSymptom No power indicator light, no response when trying to turn onPlease assist in diagnosing and resolving the power supply board problem

—> Purchase or Repair:

#Bristol Babcock by Ameerdeen .Vellaithamby on 2012-11-28 02:11

I need repair service for my Bristol Babcock 392059-01-0 4132 unit as it is not functioning properly. Any technicians available to fix it?

—> Purchase or Repair:

#Baumuller by Hoff on 2011-06-13 21:25

Do you have a Baumuller R700 8D.37Z35-3568 servo drive available for repair or purchase? Our unit went down, and we need to keep production running smoothly. Thank you.

—> Purchase or Repair:

#Bbc-Veritron by jeff on 2013-06-21 05:46

DEAR SIR, WE ARE USING BBC VERITRO DC SERVO DRIVES FOR OUR CNC LATHE (VEGA)MACHINES. WE NEED THE COMPLETE MANUAL FOR THE DRIVE, MODEL: AAD 6401A V4. KINDLY HELP US.

#Bbc-Veritron by Maroulas Ioannis on 2013-01-09 09:50

I need manual for BBC VERITRON Type 6..., 7..., 8...and AD3003Thank you.

#Brandenburg by JOSEPH A. FOSTER on 2024-12-29 10:34

The Brandenburg 2481-201-01 power supply unit is not working.

—> Purchase or Repair:

#Ball Electronic by pritam singh on 2009-09-09 09:50

EST Number Required for Samsung monitor 15\" color Model No--591s Sync Master

—> Purchase or Repair:

#Ball Electronic by mahrndra namdeo on 2012-08-27 11:01

very good

—> Purchase or Repair:

#Ball Electronic by Chinmaya Kumar Dwibedy on 2010-07-27 03:43

no coment

—> Purchase or Repair:

#Bristol Babcock by darshansinghmanku on 2012-07-06 21:36

Can the Bristol Babcock 392059-01-0 4132 be repaired or replaced? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:

#Baldor by Mikko on 2025-06-01 07:11

The Baldor FMH2A06TR-EN23 Micro Flex compact AC servo drive is malfunctioning and causing a critical downtime on the production line. Immediate repair service is required to restore operations swiftly.

#Bosch by JAIMEVAZQUEZ on 2009-11-04 00:00

Machine not responding to any input commands. Production halted. Need urgent assistance to troubleshoot and resolve issue with Bosch Z15-1-240v DC drive.

—> Purchase or Repair:

#Bbc-Veritron by Vladimir S. Reyes on 2009-08-24 09:04

Please send us the manuals for the drive,writeen below are the details:Spindle Driver Unit: Veritron Rectifier Converter Type - GLBI 6253ADT209013R003Serial number: GN5003291/00159155INPUT: AC 0-450V 48-63 HzOUTPUT: DC 0-320V 30A

#Ball Electronic by anil garg on 2012-02-16 07:52

please send me circuit diagram. i want to know value of resistance of r738in hcm780m model

—> Purchase or Repair:

#Bachmann Electronic by JOSÉ CEBALLOS on 2012-12-19 20:48

UNIT BE USED TO CONTROL A PROPORTIONAL VALVE ELECTRO FROM A MITSUBISHI PLC. FOR THIS REASON REQUIRE WORDS AND INFORMATION PINOUT control method.THANKS!JM

—> Purchase or Repair:

#Ball Electronic by ajay bansal on 2010-02-11 07:26

pleasssss give me monitor circuit digram with parts value

—> Purchase or Repair:

#Bachmann Electronic by Tang Cam Minh on 2006-05-25 15:04

I had to repair the injection moding machine product by BattenfeldModel :BK-T 1000 Controller :Unilog 4000 Bwith the problem as folowing :-the batery was empty and lost data on the MF600 card How to download the solfware would you help me?Thank you very much and seeyou agianfrom : Tang Cam MinhEmail…Purchase or Repair:

#Bristol Babcock by Greeley on 2012-04-06 16:55

I am interested in purchasing a Bristol Babcock 392059-01-0 4132. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#Ball Electronic by Badut Ancol on 2012-07-03 12:59

Lieyr goblog aaaah, moal mere mah moal we to sina kkurilingan kehed siah...!

—> Purchase or Repair:

#Bbc-Veritron by Fellous Michael on 2008-07-22 10:25

Dear supplierHelloWe are using a BBC Veritron Voltage Control of A.C. Loads.Regrettably after 20-30 years he doesn\'t work any more, our controller give to the Voltage controller 4-20 mA and the heaters doesn\'t react.our model type is:EFL-4243380v50Hz300AeffI would like to know if you can send me a…...
Show More

#B & K by Tom on 2006-01-22 14:37

Looking for information/manual on a B&K Proline model PL 5010 Programmable IC tester. The unit has a board learn feature and can save the information to a 2816 eeprom I think. Without the manual or more information I can\'t be sure. Any information would help. Thanks

—> Purchase or Repair:

#Barco Graphics by Vincenzo Giobbe on 2019-07-03 10:36

Hi ,can you help me about input signal video monitor MCD214ACU MKIIIbest regards

—> Purchase or Repair:

#Buhler by Irinei on 2024-10-09 18:05

Hello, I am looking for information regarding a Buhler FT4165-000, which is a Sortex Z Series Lamp Driver Board. My client is experiencing some issues with it. Can you please provide some guidance on how to address this problem? Thank you.

—> Purchase or Repair:

#Brothers by HENRY McCUISTION on 2010-12-12 15:39

Hello, I'm reaching out on behalf of my client regarding a Brothers S29009-001 Power Supply board. They are experiencing issues with it and would like to get more information on repairs or possible solutions. Thank you.

—> Purchase or Repair:

#Bell Inc by Robin on 2009-07-28 14:42

Could you send Manual of FIRETROL Battery Charger of our Fire Pump unit control system.Charger not work properly and we change the the TAP setting.Thank you for your attention and respons

—> Purchase or Repair:

#Ball Electronic by Migs on 2010-09-28 10:56

samsung591s circut diagram

—> Purchase or Repair:

#Bbc-Veritron by MUHARREM ERDOÐAN on 2012-11-15 10:07

Hello; We need Bbc05ma21mc serve drivers data sheet with user manual. how can we have them. Can you send us with e-mail. Thanks. Best Regards.

#Bausch + Lomb by ATLAS ELECTRIC MOTOR on 2006-06-20 03:32

The Bausch + Lomb ACU-Rite III 38.75.97.00 is experiencing frequent calibration errors, leading to production delays. Urgent repair/service required to avoid further disruptions to the production line.

—> Purchase or Repair:

#Baelz by Dental on 2013-11-26 00:00

Multiple Returns of Baelz WBS 32390 ControllersHello ,I am the inventory manager at , and I have noticed a trend of multiple returns or reports regarding the Baelz WBS 32390 controllers. Our records indicate that these units are frequently experiencing issues, as reported by our customers or technic…Purchase or Repair:

#Barco Sedo by Md. Anwar Hossain on 2015-11-01 12:43

How to gotten sedomat controller repairing, service support & software support Thankg

—> Purchase or Repair:

#Bristol Saybrook by Leighton Wong on 2014-08-10 02:10

I have a Bristol Saybrook electric motor that is used for a case annealer for rifle cartridges. The model is 447, 511D-W, 81k, 4 RPM, 120 v, 60 Hz, 4 W. The motor works however when load is put onto the motor it stops rotating the cartridge holder. The spindle on the motor goes into a drive drum abo…Purchase or Repair:

#Brothers by terrance sherman on 2010-02-01 13:47

I will check on the availability of parts or support for the Brothers S29009-001 Power Supply board and get back to you with the information.

—> Purchase or Repair:

#Bbc-Veritron by HUSAIN on 2009-04-24 19:58

i need the user manual of this item shown below VERITRON STROMRICHTER CONVERTERthank youeng. husain al yaseriiraq - baghdad

#Ball Electronic by ycktrading on 2008-04-24 13:08

please give me all monitor circuit diagram

—> Purchase or Repair:

#Ball Electronic by bk mishra on 2011-11-28 14:05

hi sir im bk mishra form ballarpur chandrapur please send me circuit digram of HCM780 MONITOR BK MISHRA

—> Purchase or Repair:

#Barc Industries by Ene Petre on 2010-01-05 16:45

Hey team, the Barc Industries VSD 1000 V9509505 TV Demodulator unit went down mid-shift. Need someone to check it out during the day. Thanks!

—> Purchase or Repair:

#Barc Industries by Lloyd Morris on 2010-07-31 13:59

Hey there, I'm reaching out to inquire about the Barc Industries VSD 1000 V9509500 TV demodulator unit. We're looking to find out if this model is still supported or if there are replacement parts available. Thank you for your assistance.

—> Purchase or Repair:

#Barco Sedo by Md. Anwar Hossain on 2015-11-01 12:45

How to gotten sedomat controller repairing, service support & software support Thankg

—> Purchase or Repair:

#Brothers by Schultz on 2010-12-27 09:56

The Brothers S29008-001 positioning board is not working.

—> Purchase or Repair:

#Barco Sedo by Md. Anwar hossain on 2013-07-13 18:57

Dear sir, Good morning, your supplied lot of dying m/c used barco sedo 1800 & 2500, Now i facing same problem so can possible to support for spear parts

—> Purchase or Repair:

#Barc Industries by morrison on 2010-03-19 17:27

The Barc Industries VSD 1000 V9509500 is not functioning properly. Please investigate the issue. Thank you.

—> Purchase or Repair:

#Bbc-Veritron by KAMRAN AHMED on 2011-10-05 08:17

Respectedwe required manual for the ABB DrivesType: AND 6601GN: 6789174/2ABB veritron stromrichter converterRegardskamran ahmed

#Bbc-Metrawatt by CoarOblilasia on 2011-11-01 04:57

hi boys i thing buy panasonic camera. What is your recommendation model? Best regards.

#Barc Industries by Vinklarek on 2010-11-26 09:52

The Barc Industries VSD 1000 V9509500 is a TV Demodulator unit that is currently not working.

—> Purchase or Repair:

#Bailey by Uttam on 2022-09-15 00:00

Urgent Repair Needed for Bailey 6639051A1Hi ,Our Bailey 6639051A1 equipment is currently down with an unknown issue. The display is blank, and there are no power indicators. We suspect a possible electrical failure. Please send a technician as soon as possible to diagnose and repair the problem.Than…Purchase or Repair:

#BuzMatics by Ilir Mjeku on 2008-08-28 14:21

Hello, do you have a BuzMatics T-3000 SPCJR-0E10-0G060 Transducer available for sale or repair? Our unit went down, and we need to keep production running. Thank you.

—> Purchase or Repair:

#Barc Industries by Waldemar on 2010-03-31 12:16

Do you have a Barc Industries VSD 1000 V9509500 TV Demodulator available for sale or repair? Need it urgently to keep the production running. Thank you.

—> Purchase or Repair:

#Ball Electronics by LAXMINARAYAN on 2008-02-14 01:58

The Ball Electronics TV70 7-020-0277 monitor unit is displaying unusual behavior in the warehouse.

—> Purchase or Repair:

#Branscheid by JORGE GARCIA on 2010-03-20 19:29

Srs. BranscheidDe mis consideraciones:Reciban un cordial saludo el motivo de la presente es con la finalidad de solicitar informacion acerca del manual de operacion del equipo :FOERSTER-DEFECTOMETER 2.837 TYPO 1437569 S/N 1206 esperando recibir una respuesta afirmativa me despido de Uds.

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.