H for Service call 1-336-969-0110 at Industrial Electronics Repair

H Service & Repair Forum

If you need your H tested or repaired then give us a call. We offer free estimates and offer extended warranties. You can contact us at 1-(336)-969-0110 Shipping/Receiving Industrial Electronic Repair 931-E S. Main St #204, Kernersville, NC 27284 Phone: (336) 969-0110 We repair industrial electronic devices If you have an industrial electronic device that needs repair, Feel free to contact us!

— Posted by Sales on 2005-05-09

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "H"

HAAS → Haas 30 AMP 32-5550J ↗
HAAS → Haas 30 AMP 32-5550E ↗
HAAS → Haas 30 AMP 4015J-A ↗
H.G. Kalish → H.G. Kalish Kalish Maintenance ↗
H & L → H & L Trumpf CNC H&L Linear Amp ↗
H.G. Kalish → H.G. Kalish Bottle unscrumbler kalisort 60 Model# 7400, serial ↗
Haake → Haake 002-4177 ↗

If you need your H unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 778 Comments

#Hergeth by manish soni on 2007-09-06 06:48

WE HAVE A HERGETH SAMPLE WARPING M/C TYPE :- MS-1800 SR.NO.:- 8.7608/1 WE HAVE A PROBLAME IN ABOVE MENTIONED M/C WHEN I FEED THE PROGRAM IN COMPUTER THEN PROGRAM DOES NOT EXECUTED AND IT DISPLASE FLLOWING MESSAGE - \"COMMUNICATION ERROR WITH PLC\" SO PLEASE GIVE ME SUGGATION IN ABOVE PROBLEM

#Hofa Engineering by Darwin on 2011-08-11 07:35

Can u send me the manual book. Tq.

—> Purchase or Repair:

#Health Rider by Shane Rhodes on 2016-12-18 21:17

I recommend reaching out to the manufacturer directly to inquire about the support and availability of parts for your Health Rider M8930 057-0148-251 rowing machine. It would be helpful to provide as much information about the model as possible.

—> Purchase or Repair:

#Hartmann & Lammle by Mohamed on 2012-04-04 04:22

HelloI have a hydraulic linear amplifier from H+Lmodel 141Zthe Magnetic position sensor is working in just one position, the other position is not working, so can I send just the sensor for fixing or can you provide spare partBest regardsMohamed

—> Purchase or Repair:

#HDL Research Lab by Steve Kiphart on 2012-04-20 14:05

The power supply in HDL Research Lab 66015 331390 is currently not providing the necessary voltage to get production back online.

—> Purchase or Repair:

#HED Inc by Gromling on 2011-12-09 20:55

Please let me know if you have the HED Inc RS600 GB-015-107 in stock for sale or repair. Thank you.

—> Purchase or Repair:

#HDL Research Lab by Dean Hill on 2012-04-20 20:44

Could you please confirm if the HDL Research Lab 66015 331390 power supply is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:

#HED Inc by joaquín losada on 2011-12-21 05:25

I am following up on my previous message regarding the HED Inc RS600 GB-015-107 Programmable Machine Controller. The unit is still down. Please provide an update on the situation

—> Purchase or Repair:

#HDL Research Lab by PREMARATNE W.P. on 2012-12-10 00:26

Unit 331390 DC2-43, the power supply has failed. Please address it during the day shift.

—> Purchase or Repair:

#Hetronic by Jerry Wilemon on 2010-04-21 02:33

Hello, we have a Hetronic BX 023268 B15 GA 609 transmitter that is currently not working. We are in need of repair information. Can you provide assistance on how we can repair or replace this item? Thank you.

—> Purchase or Repair:

#HAAS by Barry Keech on 2015-03-09 21:13

The HAAS 30 Amp 32-5550E is a Servo Amplifier that is currently not working. Maintenance team needs assistance with this unit.

—> Purchase or Repair:

#Hench Control by Ronald Whaley on 2021-07-09 00:00

Hench Control 20-0100-01 not responding to input commands. Urgently seeking repair service.

—> Purchase or Repair:

#HDL Research Lab by GERRALD on 2012-01-25 03:29

Machine experiencing frequent power surges, shutting down unexpectedly during operation.

—> Purchase or Repair:

#Hydromatic Pump by CARLTON DSOUZA on 2013-04-22 04:19

Dear Sir,Below is the details of the Hydrauliv Motor we require the price with delivery schedule it is urgent.HYDROMATIK GMBHULM ( DONAU )TYPE : 40.803.80.210NR: 418.878FABR NR : 1964660BAUJAHR: 07.87MADE IN W-GERMANYThanks & RegardsCarlton D\'souzacell No -08420007086

—> Purchase or Repair:

#Heenan Drives Ltd by Alf Svensson on 2009-02-10 08:34

We have a unit named Heenan Thyristor Control 76/6C wich broken. Is it possible to repair it or have it exchanged

#Hofa Engineering by Helal on 2010-08-28 02:25

Dear I need user manual ( parameter Setup ) Type:M36VP07 (1.5KVA). pls data sheet send me.our factory have 6 inverter but user manual no have.

—> Purchase or Repair:

#Hollymatic by Ed Walker on 2015-02-05 21:31

We received a holleymatic vacuum tumbler from another company who no longer used it. All info I can find on the machine as follows: 900-1040, model- ET5, TYP- L025, serial# T-153, Year- 1998. Can you give me any info from this and a manual perhaps. Thank you.

#Hydrocraft by Noorhafizah Ab Bakar on 2012-08-10 05:11

PUMP, HYDRO-CRAFT # TVWS-360-M-R-DRQuantity : 1 EAManufacturer : HYDRO-CRAFT INCManufacturer Part No: TVWS-360-M-R-DRHYDRO PUMPEQTO DWG # 207-640-D#11END USE : SEA-HYDRAULIC STARTER SYSTEM Deadlines : Before 15th AUGUST 2012

#HDL Research Lab by Josh Beyatt on 2012-05-24 22:05

one of the power supply units for Lab 331390 DC2-43 went down mid-shift. Please check and fix it during the day. Thanks!

—> Purchase or Repair:

#HDL Research Lab by bruce sargent on 2012-01-26 02:43

I've been informed about a unit in the lab that isn't functioning correctly.

—> Purchase or Repair:

#Hofa Engineering by Helal on 2011-08-21 09:55

Hi Supplier,we need the Dynagen Inverter User & Service Manual, Type is M36V2P07, 1.5/3 KVA.Please User Manual Send me.Thanks,Helal

—> Purchase or Repair:

#HDL Research Lab by NICK NIENHAUS on 2012-12-15 10:03

Unit 66015 331390 power supply went down during the night shift. Need to be checked and fixed ASAP.

—> Purchase or Repair:

#HED Inc by Marco Antonio Vianna da Silva on 2011-10-04 12:29

One of the boards in the HED Inc RS600 GB-015-107 Programmable Machine Controller just failed, need immediate attention to avoid production downtime. Heading to check the specific drive now.

—> Purchase or Repair:

#Hofa Engineering by Wingo Kwok on 2008-12-06 06:57

Dear Sir,My DYNAGEN PWM inverter was erected on last year. It was break down for a periods due to unsteady speed. The specification was listed as below:Hofa EngineeringModel: 36-2003.Volts:200-230Phase: 1/3It was break down for a periods due to unsteady speed and I need the user manual or your techn…Purchase or Repair:

#HDL Research Lab by ASHRAF KHLIL on 2012-06-22 18:53

Can the HDL Research Lab 66015 331390 power supply be repaired or replaced? Just trying to check this off my to-do list. Thank you.

—> Purchase or Repair:

#HED Inc by Kathy Clark on 2010-08-19 19:51

I need assistance with a HED Inc Programmable Machine Controller GB-015-107. The controller is not responding properly. Please provide troubleshooting steps or repair options.

—> Purchase or Repair:

#Hofa Engineering by Bui Hong Luc on 2009-09-19 04:51

Please send to me the manaul book of inverter dynagen

—> Purchase or Repair:

#Hotpack Corporation by Hugues Sansregret on 2012-05-23 18:24

Hi,Would it be possible to get a user manual for a tru-temp ove (model: 212041, serial 66189, 220 volt).ThanksHugues S.

—> Purchase or Repair:

#Hurletron by ROLLY FRANC on 2009-03-16 23:45

DEAR SIR,DO YOU KNOW ANYBODY WHERE I CAN BUY OR REPAIR MY URGENT NEEDHERE IS THE HURLETRON DRIVE CONTROLLER I NEED3 PCS. ARMATEUR BOARDSPECS. 1% ARMATEUR REGULATION BOARDPCB BOARD #990181D34R2 D35R2MFR: HURLETRON DRIVE CONTROLLERHURLETRON ALTAIR MODEL #5128INPUT 460ARM VDC 550FLD VDC 180SERIES #5126…...
Show More

#Hofa Engineering by zuhair on 2019-05-16 23:58

user manual for dynagen pwm inverter type 26-4005n hofa engineering

—> Purchase or Repair:

#Hollymatic by JORGE on 2025-06-12 03:11

I need the manual and the electrical diagram of the machine, please

#Hydromatic Pump by kees on 2010-08-20 12:16

please send us quotation for this itemTyp.1.0 1 0E03A A4V 40FLNR233.17.00.13FAB-NR BAUJAHR MINERAL2514268 12.89 ÖL THANKS FOR YOUR ATTENTION

—> Purchase or Repair:

#Heenan Drives Ltd by Abdulla Mohsin on 2006-01-18 07:45

Dear Sir,Kindly note that Kahramaa is electricity and water distribution corporation in Qatar and we would like to inform you that a Heenan ac variable frequency drive was installed to operate a main forwarding motor in one of our main forwarding water stations was found defective. A buring smell is…...
Show More

#Hesston by Richardhoams on 2025-05-31 09:23

There was downtime with the Hesston 700720120 baler control unit. Need details about what happened and when it occurred before the next shift arrives.

—> Purchase or Repair:

#Hawker Siddeley by Laarz on 2010-09-28 18:14

Do you have a replacement control board available for the Hawker Siddeley 12-600F 3B 22 CA4024002 9638 for sale or repair? Our production is halted, and we need to keep it running.

—> Purchase or Repair:

#Heart Interface by Nitin Khedulkar on 2015-07-27 12:20

I was told that the Heart Interface Link 2000 84-2000-01 digital display unit is not working.

—> Purchase or Repair:

#Hitron by Palkar on 2006-11-09 02:00

I need an update on our Hitron HV1216-40 9736 power supply. The unit is still down. Please provide a status ASAP.

—> Purchase or Repair:

#HED Inc by Denny Smith on 2011-02-19 13:42

The HED Inc RS600 GB-015-107 programmable machine controller is displaying error code 107. Equipment is completely unresponsive. Need urgent assistance to resolve the issue.

—> Purchase or Repair:

#Heenan Drives Ltd by RANA AURANG ZAIB on 2010-10-31 08:43

HI SIR / MADAM I AM FACING THE PROBLEM IN CONTROL THE FLAT SHEET IRONER WITCH IS FIX YOUR BOARD BY BMM WESTON I AM LOOKING THE DETAIL OF CARD OF HEENAN 200/6WAITING FOR YOU REPLY THANKSRANA AURANG ZAIB96650171578696612411748WITH BEST REGARDS

#Hewlett Packard by Su on 2025-06-09 18:24

The Hewlett Packard 6633A external power supply unit in the warehouse is exhibiting abnormal behavior. It is not functioning as it usually does, but I'm uncertain about the specific issue.

—> Purchase or Repair:

#HED Inc by Lemanski on 2010-10-13 21:55

We experienced downtime on the HED Inc Programmable Machine Controller GB-015-107 earlier today. The issue occurred at 1030 AM while running a batch production. Please investigate and provide a detailed report before the next shift starts. Thank you.

—> Purchase or Repair:

#Hidral by Neil Stevens on 2023-09-26 07:42

The HIDRAL MEH3/AD unit is not functioning properly. It seems to be related to the Interface Board. That's the information I have at the moment.

#Hacoba by jose rios on 2012-05-08 00:39

MY hacoba h 1250 give me an error e0006, how can i solve this problem, or where can i get information.thank you

#Hantarex by kahchoong on 2005-07-27 03:23

please quote us the following item.1) fly black transformer p/n 1182.06471pc2) power transformer p/n 28070510-1-004/150 1pc

—> Purchase or Repair:

#Honeywell by Gennadiy Tyaglov on 2019-05-16 00:00

Inquiry Regarding Honeywell DR45AT RepairDear Repair Shop,I am reaching out on behalf of a client who is experiencing issues with their Honeywell DR45AT unit. Unfortunately, the specific details of the problem are unknown at this time.The part number of the unit in question is DR45AT. Could you plea…Purchase or Repair:

#High Perfection Technology by total sportswear on 2013-05-30 19:02

The High Perfection Technology B1P2-40400N 20-2268 is a power supply unit that isn't working.

—> Purchase or Repair:

#Hofa Engineering by CS TAN on 2012-04-30 08:08

Dynagen Pwm Inverter

—> Purchase or Repair:

#HDL Research Lab by Terry Thompson on 2012-12-18 02:13

Hello, our HDL Research Lab 331390 DC2-43 power supply is currently down. The equipment is showing error code E342 and is not powering on. Immediate assistance is required to troubleshoot and resolve the issue. Thank you.

—> Purchase or Repair:

#HDL Research Lab by Hannu Kerola on 2012-03-27 22:36

The unit in lab 66015 331390 is a power supply and it currently isn't working.

—> Purchase or Repair:

#HAAS by Bourgeois on 2015-07-24 04:20

Our HAAS 30 Amp 32-5550E Servo Amplifier is still down. Please provide assistance

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.