P for Service call 1-336-969-0110 at Industrial Electronics Repair

P Service & Repair Forum

If you need your P tested or repaired then give us a call. We offer free estimates and offer extended warranties. You can contact us at 1-(336)-969-0110 Shipping/Receiving Industrial Electronic Repair 931-E S. Main St #204, Kernersville, NC 27284 Phone: (336) 969-0110 We repair industrial electronic devices If you have an industrial electronic device that needs repair, Feel free to contact us!

— Posted by Sales on 2005-05-09

Reply🗨️Ask a New Question Below❓

If you need your P unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 1496 Comments

#PWM by Daniel Palmer on 2011-08-04 06:27

The unit PWM 391 4101 440 8507741, which is a controller, is not functioning as expected. It is exhibiting unusual behavior and is not performing its typical functions.

—> Purchase or Repair:

#Power Pac Inc by Lena on 2017-01-09 00:00

The Power Pac Inc VME100-3-M160 is displaying error code E345. Equipment is not powering on. Please advise on troubleshooting steps or repair needed.

—> Purchase or Repair:

#Polar by Oswaldo Ojeda on 2012-06-02 05:56

I necedad to repair the the SK board for aPolar EM monitor. Please give opción to do it. Thank you

—> Purchase or Repair:

#Procond Elettronica by Zsohár Imre on 2013-03-30 16:21

Please help me!AEG LAVATHERM Dryer turns off after 10 seconds.PNC: 91601416300S / N: 34285616I do not know what is wrong!

—> Purchase or Repair:

#Procond Elettronica by Hermelindo on 2007-08-01 12:49

I am following up regarding my Procond Elettronica MC-70 124438 treadmill controller issue. The unit is still down. I kindly request immediate assistance. Thank you.

—> Purchase or Repair:

#Procond Elettronica by Lee Birloton on 2011-12-27 20:15

PLS price for Procond Elettronicatype:P451525507 F:3711Type: E132219814SW VER.W1a30140 07/dec/05Thanks for help L.Birloton

—> Purchase or Repair:

#Prototrak by Ray Welch on 2009-12-09 12:46

The Prototrak M3 20320R drive unit isn't working as reported.

—> Purchase or Repair:

#PWM by Krakowiak on 2011-04-05 04:38

Equipment down with error code PWM 391 4101 440. Suspect issue with the board. Urgent attention needed to resolve. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:

#Power Spec by Pedro Fernandes on 2010-10-28 11:32

Power Spec HOAU242004 6693006602 down. Issue Power supply. Needs immediate attention. Please investigate and rectify in the morning. Thanks.

—> Purchase or Repair:

#Phoenix by CANDELARIO on 2016-11-06 00:24

Unit 134564-C1 95-134563-003-C down mid-shift. PC Control Board issue. Please troubleshoot and fix ASAP. Thanks!

—> Purchase or Repair:

#Panametrics by Tom on 2015-03-21 23:22

My upper screen is dim and need it replaced or repaired. Do I need to send the unit or can I buy the part.

—> Purchase or Repair:

#Panadac by EDUARDO on 2010-11-10 02:25

Need to driver therm printer PANADAC 931-02THANKS

#Plockmatic by Cal Hunter on 2013-09-10 20:28

We have a Plockmatic unit that was in line with a Savin (B&W approx 60 CPM) copier. We are using it off line as a stand alone hand feed unit. We have the service manual. It is 8 to 10 years old.Do yo do service on these machines?Would it be reasonable for me to put it in a van and bring it down to y…Purchase or Repair:

#Procond by brian waterman on 2006-12-19 15:01

The Procond MC-70 124438 treadmill controller has failed. Urgent action required to locate and replace the faulty drive or board.

—> Purchase or Repair:

#Proto Trak by Schlink on 2015-03-24 14:14

The Proto Trak M3 20347-2R is showing Error Code 20347-2R indicating an issue with the Pendant Assembly. Equipment is currently down, needing immediate attention for troubleshooting and repair.

—> Purchase or Repair:

#Procond Elettronica by tahir on 2007-03-20 18:01

Hey, the Procond Elettronica MC-70 124438 treadmill controller unit went down mid-shift. Needs attention, please follow up during the day. Thanks!

—> Purchase or Repair:

#Procond Elettronica by catalin on 2020-05-30 11:38

how much would a spare part Procond Elettronica411612438 costs? thanks

—> Purchase or Repair:

#Prototrak by Davidhasia on 2009-01-20 02:25

We experienced downtime with the Prototrak M3 20320R due to drive issues. This occurred during our shift today. Quick resolution is needed before the next shift. Can you investigate and provide a solution as soon as possible?

—> Purchase or Repair:

#PWM by sameera abeysinghe on 2011-07-20 04:28

Please provide repair information for PWM 391 4101 440 8507741 controller. Thank you.

—> Purchase or Repair:

#Prototrak by matt arendt on 2009-08-30 07:41

The Prototrak M3 20320R unit related to the drive is currently not working. It's best to consult the maintenance team for proper assistance.

—> Purchase or Repair:

#Power Spec by John tba on 2011-10-17 02:45

Unit Power Spec HOAU242001 with serial number 6693006610 experienced a power supply failure, resulting in downtime. The issue occurred today at 245 AM. Seeking a

—> Purchase or Repair:

#Procond Elettronica by Claude Coronado on 2007-04-24 20:20

The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing delays in production. Please expedite repairs to minimize downtime on the line.

—> Purchase or Repair:

#Prototrak by Airworks on 2009-02-07 11:25

Hi there, we're experiencing issues with the drive on our Prototrak M3 20320R. We're in need of a replacement, but we can't find one. Can you please provide us with repair information as soon as possible? Thank you.

—> Purchase or Repair:

#Procond Elettronica by Laursen on 2007-09-18 20:05

Hello, I am interested in the Procond Elettronica MC-70 124438 treadmill board. Could you please provide information on its pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#Poletti & Osta by TECNOLOGIE GRAFICHE INDUSTRIALI on 2007-06-15 13:45

Dear Sirs,We take the pleasure in informing you that we could supply you with original spare parts for your Aurelia 700/2 Serial No.70061, this because our firm has bought the complete inventory of Aurelia spare parts.We could also supply a complete kit to replace the old model Video VD1001, that is…Purchase or Repair:

#Procond Elettronica by Gary Diamond on 2012-05-01 06:34

ARE YOU GUYS BUY USED BOARDS PULLED FROM TREADMILLSIF SO HOW MUCH NOT TESTED? OR REPAIRED, UNLESS YOU WANTED THEM REPAIRED

—> Purchase or Repair:

#Pellerin by Larry G Roberts on 2025-05-30 03:23

Hey team, the Pellerin Milnor 08bs08116b went down mid-shift. Issue unknown. Please check it out first thing in the morning. Thanks.

—> Purchase or Repair:

#Procond Elettronica by PatrickvoB on 2022-05-19 20:44

An injury that renders a person handicapped and prohibits them from returning to work for a lengthy period of time is known as a long-term disability. Long-term disability lawyers in Brampton can offer you peace of mind and support during this difficult time.

—> Purchase or Repair:

#Power Pac by CPC on 2011-12-14 13:16

The Power Pac VME100-3-M160 105558-001 is not functioning properly. The maintenance team needs to take a look at it.

—> Purchase or Repair:

#Prototrak by FARHAT PARACHA on 2009-05-21 21:29

The Prototrak M3 20320R is displaying error code 203. The drive is not functioning properly, causing equipment downtime. Please advise on next steps for troubleshooting and repair. Thank you.

—> Purchase or Repair:

#Prototrak by Rieckers on 2009-06-07 05:41

The unit labeled 'Prototrak M3 20320R - Drive' in the warehouse is exhibiting abnormal behavior. It is not functioning as it normally does, acting oddly and not performing its usual tasks.

—> Purchase or Repair:

#Precor by Koos on 2011-05-26 09:25

Hello, we're in urgent need of repair information for a Precor 905E with the description "motor control circuit board." Could you please provide us with details on how to obtain a replacement as soon as possible? Thank you.

—> Purchase or Repair:

#Procond Elettronica by amador on 2007-04-17 22:15

Hey team, the Procond Elettronica MC-70 124438 treadmill controller unit went down mid-shift. Please check it out first thing in the morning. Thanks!

—> Purchase or Repair:

#Procond Elettronica by sanjay on 2008-11-21 22:35

R57 resistance value is 1k ohms wire wound around 5watts. presently i am looking for the value of R68. can you help?sanjay

—> Purchase or Repair:

#Panalarm by Cady on 2013-07-17 05:44

We need assistance with Panalarm 91M-B0200-010 090-0098-3-01 Circuit Board. Our client is experiencing issues with it and requires repair. Can you provide details on how to proceed? Thank you.

—> Purchase or Repair:

#Prototrak by Paul Drudge on 2009-10-25 15:46

Prototrak M3 20320R showing "Drive Fault" error.

—> Purchase or Repair:

#Pierce by ARUMOY on 2014-11-02 22:57

Our Pierce VER 2.00 CL-702-112 Control Module is malfunctioning, causing a halt in our production line. Urgent attention and repair service are needed to resolve this issue

—> Purchase or Repair:

#Prescolite Controls by Stephen D. Grimes on 2010-08-31 03:10

I was the Field Service Coordinator for Prescolite Controls from 1990 to 1995. I dont have any documention on the systems, but I was the 1-800-dimmers guy for five years. If you can provide me with panel and control type I can answer alot of your questions.Stephen Grimes804-796-9051—> …Purchase or Repair:

#ProtoTrak by craig stuart on 2013-08-09 14:32

Can the ProtoTrak Plus 15690 DRO be repaired or replaced? I'm looking to check this off my to-do list.

—> Purchase or Repair:

#Procond Elettronica by kellyTag on 2021-12-09 02:09

hello. topic for me thanks kelly

—> Purchase or Repair:

#Power Systems Inc. by junior fio solino on 2010-05-04 08:28

Power Systems Inc. 225X-65 power supply not turning on.

—> Purchase or Repair:

#Prototrak by prasanna on 2009-04-05 06:26

The Prototrak M3 20320R is displaying error code E023 and is showing a drive fault. Equipment is currently down, requiring immediate attention for diagnosis and repair.

—> Purchase or Repair:

#Procond Elettronica by Ray Hazard on 2006-11-08 10:57

The treadmill controller (Procond Elettronica MC-70 124438) is malfunctioning, causing a halt in production. Urgent repair service is required to resume operations immediately.

—> Purchase or Repair:

#Procond Elettronica by volta on 2006-12-08 14:16

Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or purchased? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:

#Proto Trak by RAFAEL BETANCOURT Z on 2015-03-09 07:13

Proto Trak M-2 16960R is displaying Error Code 302. The servo motor is not functioning, causing equipment downtime. Please advise on next steps. Thank you.

—> Purchase or Repair:

#Parametrics by Ika Lyana Ling on 2013-03-25 11:32

I am inquiring about Parametrics 240551, a circuit board that needs repair. Could you please provide more information and an estimated cost for the repair? Thank you.

—> Purchase or Repair:

#Procond Elettronica by luth on 2007-07-04 15:33

I am reaching out on behalf of a client who needs assistance with a Procond Elettronica 453160320 141914 treadmill controller. Can you please provide information about potential repairs or replacements for this part? Thank you.

—> Purchase or Repair:

#Prototrak by Teri on 2009-10-20 20:32

I have observed irregular behavior in one of the units at the warehouse. Please provide more details so that I can assist you better.

—> Purchase or Repair:

#Power Spec by uEJO on 2011-07-15 12:11

Power Spec HOAU242001 6693006610 power supply is not functioning.

—> Purchase or Repair:

#Perma-Drive by vikas singh on 2011-08-16 07:39

dear sir, we have spare drive of PERMA DRIVE ,6350 BAD-NAUHEIM, PMD 220-15 PIK and we dont have manual to make control connection plz send it as soon as possible via mail. vikas singh Raymond Ltd. INDIA

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.