M for Service call 1-336-969-0110 at Industrial Electronics Repair

M Service & Repair Forum

If you need your M tested or repaired then give us a call. We offer free estimates and offer extended warranties. You can contact us at 1-(336)-969-0110 Shipping/Receiving Industrial Electronic Repair 931-E S. Main St #204, Kernersville, NC 27284 Phone: (336) 969-0110 We repair industrial electronic devices If you have an industrial electronic device that needs repair, Feel free to contact us!

— Posted by Sales on 2005-05-09

Reply🗨️Ask a New Question Below❓

If you need your M unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 740 Comments

#Mid South Electronics by Jared Riske on 2011-06-24 04:36

I would recommend sending a message to the manufacturer or an electronics repair specialist to inquire about the availability of replacement parts or repair options for the Mid South Electronics 2E38-10849-AD Instrument Cluster. It's important to provide all relevant details about the unit to get th…Purchase or Repair:

#MAZAK by Oliveras on 2014-09-07 10:20

Hello, we have a MAZAK MICRO DISK SYSTEM 94101 WA (CNC CONTROLLER) that needs repair. Could you please provide us with more information on the services you offer for this model? Thank you.

—> Purchase or Repair:

#Mobil Elektronik by MY SELF SIRAJ on 2013-07-05 16:09

Do you have a Mobil Elektronik MLS 406 002 D-74243 Stepper Motor available for sale or repair? Production is currently down, and we need to keep it running smoothly.

—> Purchase or Repair:

#Mity by Kevin Hughes on 2025-05-29 19:09

The Mity VEO-04 Servo Drive is currently showing error code E102, causing the equipment to stop functioning. Please advise on necessary steps to resolve this issue

—> Purchase or Repair:

#Mirtone by rick gatchell on 2013-04-10 12:44

The Mirtone 749044 25412275rev7 is a Zone Board that is not currently working.

—> Purchase or Repair:

#Meridian Instruments by Jarod Ballardo on 2020-04-06 06:21

The Meridian Instruments M.S.T. 9040 Controller Card is currently not working.

—> Purchase or Repair:

#Mutoh by Usman Khan on 2010-04-28 12:00

Hello,We can provide used mainboard.kindly specify printer width.

—> Purchase or Repair:

#Melco by JACK CROWLEY on 2016-04-27 17:22

CAN THEY BE REPAIRED OR ANY AVIALABLE. THANKS

—> Purchase or Repair:

#Maco Pac by Petruzzi on 2015-03-10 02:13

The Maco Pac 8000 80GA-10103-001-0-00 Servo Drive is malfunctioning, severely impacting our production line. Immediate action is required to resolve this issue

—> Purchase or Repair:

#Maco Pac by ellen wright on 2015-07-22 03:20

Hey team, just a heads up, the Maco Pac 8000 80GA-10103-001-0-00 Servo Drive failed. Need to troubleshoot and replace it soon. Keep you posted.

—> Purchase or Repair:

#Martin-Decker by Edwin Lau on 2012-06-27 03:09

Hi There,Please quote us as per below- 1 COIL 3MM DIA X 380FT (7x17) LHLL GALVANIZE STEEL WIRE ROPE FOR MARTIN DECKER RG252-1Thank you.Best Regards,Edwin Lau

#Micro Tech II by chagas on 2011-06-10 13:24

Please advise if the Micro Tech II MQ-LDT1100-0 060006301 Controller is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:

#Magnavox by Frank Dailey on 2010-09-20 19:51

I have a 1960 magnavox console in great condition it was my dad\'s. It however does not have a cartridge or styllist, the wires are hanging in the arm do you know there I can get a replacement. Stylist number 591062-1, model 1ST232-L purchased Dec 1960.Thank You

—> Purchase or Repair:

#Martonair by LEE SANG HUN on 2011-08-16 09:56

martonair M/1764A/125-220V solenoid valve is in use will want to purchase this product standards and specifications, please contact the e-mail you want to know.

#Micafil by eugene cargullo on 2010-09-03 03:02

SpecificationsBrand: MICAFILTYPE: VACUUM OIL FILTERMODEL: VOT30ORDER NO: 84013293YEAR OF MANUFACTURE: 2004S/N: HL 9901287Pls. send me your product manual for us to optimize its use. Thanks and more power.

#Micro-Aide by Ron Garcia on 2007-06-03 16:26

We have what you need!

#MTS by John Fuller on 2015-07-19 21:20

The MTS 011060073903000 1003060-05 Electronic Box is not working.

—> Purchase or Repair:

#MTS by SAID ABDELAZIZ on 2015-07-23 16:20

Hi there, can you please provide repair info for item MTS 011060073903000 with the description "Electronic Box"? We need to get this fixed quickly. Thanks!

—> Purchase or Repair:

#Mobil Elektronik by Victor AMADO ESPINAL on 2013-07-17 14:55

The Mobil Elektronik d-74243 MLS 406 002 unit is down. Appears to be a Stepper Motor issue. Please check and repair during the day shift. Thank you!

—> Purchase or Repair:

#Marconi Applied Technologies by Leo Rauf on 2006-06-10 22:11

We're experiencing a critical issue with the Oscillator Tube in the Marconi Applied Technologies BW 1608JF. This is causing a halt in production and needs immediate attention to resume operations swiftly. Please prioritize this repair to minimize downtime.

#MOOG by Blake on 2013-07-13 21:57

Do you have a MOOG D122-034-A001C circuit board available for sale to help keep production running?

—> Purchase or Repair:

#Modex Automation by ROLLY on 2008-07-30 09:06

HELLOPLEASE QUOTE CIF MANILA, PHILIPPINES8 UNITS BUILT-IN CHARGERBC700 SERIES CONSTANT CURRENT CHARGERGBRAND: MODEX AUTOMATIONPART NO.: BC700/12LASUPPLY VOLTAGE: 230/110VAC, 50/60HZNOMINAL OUTPUT: 3AFOR USE BATTERY TYPE: 12V LEAD ACIDPURPOSE:FOR REPLACEMENT OF DEFECTIVE BUILT-IN CHARGER OF GENSETTHA…Purchase or Repair:

#Mirtone by Ubaid on 2013-12-23 04:37

The Mirtone 749044 25412275rev7 Zone Board is displaying Error Code E13 and not detecting any input from Zone 3. Need urgent service to troubleshoot and resolve the issue.

—> Purchase or Repair:

#MAZAK by Scanga on 2014-12-21 18:44

The MAZAK MICRO DISK SYSTEM 94101 WA CNC CONTROLER is malfunctioning, causing delays in our production line. We need immediate assistance to resolve this issue and get our operations back up and running efficiently.

—> Purchase or Repair:

#Mitsubishi by Boros on 2010-11-04 23:44

The Mitsubishi MDS-A-V2-3510 Servo Drive/spindle amplifier unit is not working.

—> Purchase or Repair:

#Motorola by mirac on 2010-03-12 04:17

Hey team, the Motorola 10ST5497P31K monitor crashed during the night shift. Needs attention ASAP. Cheers!

—> Purchase or Repair:

#Microtouch by shashi bhusan on 2016-09-11 00:00

Urgent Repair/Replacement Info Needed for Microtouch Systems Inc 11-2301-78kHi ,I'm currently on-site at our office and our Microtouch Systems Inc 11-2301-78k has stopped working. We need assistance with either repair or replacement options as soon as possible. Could you please provide us with detai…Purchase or Repair:

#Mcquay by Irene Gutierrez on 2008-11-22 19:07

I am looking for the quantity of filters in a 1991 35 Ton McQuay Model # CUR351E 20X25X2 & A 1991 25 Ton McQuay Model # CUR100F 16X25X2 I really would appricate your help.Thank you Irene GutierrezAnderson Air Conditioning (714) 998-6850

—> Purchase or Repair:

#Melco by roger koren on 2016-07-06 22:11

the screen shows nothing when i start up the machine. it is blank.

—> Purchase or Repair:

#Metramatic by John Davison on 2007-12-10 15:26

we have a metramatic weightec ser# 411782 Model # weightec LW II Which is in need of the out feed beeded chain guides part\'s 1432219 1 7and 1432219 7 these pieces are 3.25\" long would you have these parts or could you point me in the right direction to get these parts thank-you

#Mirtone by DENNIS LOPEZ on 2013-07-01 08:47

Mirtone 749044 25412275rev7 Zone Board not responding, production offline.

—> Purchase or Repair:

#Metronix by Mullin on 2016-11-30 16:43

I'm having trouble with the Metronix ARS-560/5 controller for a machine here. It appears to have stopped functioning correctly, and I'm not sure what's causing the issue. Do you have any advice on troubleshooting or who I should contact for help?

#Mobil Elektronik by JORGE SUAREZ on 2013-07-08 22:41

Can the Mobil Elektronik MLS 406 002 d-74243 Stepper Motor be repaired or bought? Trying to check this off my to-do list.

—> Purchase or Repair:

#Mitsubishi by M.Kaviani nezhad on 2018-08-09 17:16

Hello, Can you please provide more information regarding troubleshooting and potential repair options for a Mitsubishi A1SJ71AP21 Data Link Module? Thank you.

—> Purchase or Repair:

#Mitsubishi by blackjack54 on 2017-09-26 07:57

Machine displaying error code E102.

—> Purchase or Repair:

#Modex Automation by P. JAYASINGHE on 2019-06-23 17:54

Please, give me complete circuit diagram of the above charge manual.Thank ,Jaya

—> Purchase or Repair:

#Mobil Elektronik by PANTOJA on 2013-08-07 10:32

The Mobil Elektronik d-74243 MLS 406 002 Stepper Motor unit is not working.

—> Purchase or Repair:

#Mobil Elektronik by Michael Landes on 2013-10-20 00:07

The Mobil Elektronik d-74243 MLS 406 002 Stepper Motor is not responding to commands and is not moving.

—> Purchase or Repair:

#Modex Automation by INOCENCIO RIVERA ISLAS on 2012-03-03 01:10

COTIZAR CARGADOR DE CORRIENTE CONSTANTE BC700/12LA MODEX AUTOMATION. EN MEXICO DONDE PUEDO COMPRAR ESTE EQUIPO?.SALUDOS.

—> Purchase or Repair:

#Mirtone by Graficas Dimensión on 2013-02-13 00:00

Can the Mirtone 79044 board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:

#Mitsubishi by Bruno Neto on 2010-10-18 09:10

I\'m having a trouble with a MR-J2S-70A (Servo Amplifier)It\'s returning the alarm 37 and i don\'t use the regenarative brake and the parameters are well definided for that...The alarms is still there and i\'d like to know if there is anyway to fix it...Thanks for all the information that you can gi…Purchase or Repair:

#Monsun-Tison by Francis Cammas on 2012-09-13 15:09

Our Koehring 1466 use Monsun Tison joysticks # HVP03-3220.Need to know where I may buy some of them to relpace the ones on machine.Thanks,Francis CammasEquipment yard superintendent.

—> Purchase or Repair:

#Milltronics by Ted Romaine on 2009-12-22 00:00

Hi there, do you have repair info available for a Milltronics 7ML10041AA101BB NAKED VGA LCD display assembly? Something is not working and we need a quick solution. Thanks!

—> Purchase or Repair:

#Mekontrol by gray hartley on 2007-11-10 02:24

I have an need for one of these for my pallet wrap machine. HELP

#Mid South Electronics by joe cunningham on 2011-08-17 17:47

The Instrument Cluster unit 2E38-10849-AD is exhibiting abnormal behavior. Please provide more details so we can investigate further.

—> Purchase or Repair:

#Mobil Elektronik by hosseinzade on 2013-02-11 08:39

Our Mobil Elektronik d-74243 MLS 406 002, Stepper Motor is still down. Please provide an update immediately.

—> Purchase or Repair:

#Mitsubishi by Marginean Marius on 2011-08-02 09:08

Dear Sirs, Please help us with an error code that we have on this driver MDS-B-SP-260, from a MAZAK CNC Lathe QT-200.On the display of the driver we have F6 - 36 error code, and on the machine driver malfunction.Thank you and we are waiting for your reply,Best regards,Marginean Marius—> …Purchase or Repair:

#mod. by Cummins on 2011-07-19 01:28

Unit -214-lc rev1 is an output board that is not functioning properly based on feedback from the maintenance team.

—> Purchase or Repair:

#Micromatik by Emily on 2019-11-11 00:00

There was a downtime caused by the Micromatik 030M1423.R02 CONTROLLER unit. The description of the issue is unknown at the moment. It happened during the last shift, and we need to address it before the next shift arrives. Please assist as soon as possible. Thank you.

—> Purchase or Repair:

#Monsun-Tison by Perry Merlo on 2015-12-07 15:34

Please give me an estimate to have this valve repaired. It operates the drive wheels on a Simon boom lift. It only allows the machine to move in one direction (forward). I switched the directional hoses around and can tell the problem is with this value as it will go in reverse but now not forward. …Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.